cl_input.c

   1 /*
   2 Copyright (C) 1996-1997 Id Software, Inc.
   3
   4 This program is free software; you can redistribute it and/or
   5 modify it under the terms of the GNU General Public License
   6 as published by the Free Software Foundation; either version 2
   7 of the License, or (at your option) any later version.
   8
   9 This program is distributed in the hope that it will be useful,
  10 but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  12
  13 See the GNU General Public License for more details.
  14
  15 You should have received a copy of the GNU General Public License
  16 along with this program; if not, write to the Free Software
  17 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  18
  19 */
  20 // cl.input.c  -- builds an intended movement command to send to the server
  21
  22 // Quake is a trademark of Id Software, Inc., (c) 1996 Id Software, Inc. All
  23 // rights reserved.
  24
  25 #include "quakedef.h"
  26 #include "csprogs.h"
  27
  28 /*
  29 ===============================================================================
  30
  31 KEY BUTTONS
  32
  33 Continuous button event tracking is complicated by the fact that two different
  34 input sources (say, mouse button 1 and the control key) can both press the
  35 same button, but the button should only be released when both of the
  36 pressing key have been released.
  37
  38 When a key event issues a button command (+forward, +attack, etc), it appends
  39 its key number as a parameter to the command so it can be matched up with
  40 the release.
  41
  42 state bit 0 is the current state of the key
  43 state bit 1 is edge triggered on the up to down transition
  44 state bit 2 is edge triggered on the down to up transition
  45
  46 ===============================================================================
  47 */
  48
  49
  50 kbutton_t       in_mlook, in_klook;
  51 kbutton_t       in_left, in_right, in_forward, in_back;
  52 kbutton_t       in_lookup, in_lookdown, in_moveleft, in_moveright;
  53 kbutton_t       in_strafe, in_speed, in_jump, in_attack, in_use;
  54 kbutton_t       in_up, in_down;
  55 // LordHavoc: added 6 new buttons
  56 kbutton_t       in_button3, in_button4, in_button5, in_button6, in_button7, in_button8;
  57 //even more
  58 kbutton_t       in_button9, in_button10, in_button11, in_button12, in_button13, in_button14, in_button15, in_button16;
  59
  60 int                     in_impulse;
  61
  62
  63
  64 void KeyDown (kbutton_t *b)
  65 {
  66         int k;
  67         const char *c;
  68
  69         c = Cmd_Argv(1);
  70         if (c[0])
  71                 k = atoi(c);
  72         else
  73                 k = -1;         // typed manually at the console for continuous down
  74
  75         if (k == b->down[0] || k == b->down[1])
  76                 return;         // repeating key
  77
  78         if (!b->down[0])
  79                 b->down[0] = k;
  80         else if (!b->down[1])
  81                 b->down[1] = k;
  82         else
  83         {
  84                 Con_Print("Three keys down for a button!\n");
  85                 return;
  86         }
  87
  88         if (b->state & 1)
  89                 return;         // still down
  90         b->state |= 1 + 2;      // down + impulse down
  91 }
  92
  93 void KeyUp (kbutton_t *b)
  94 {
  95         int k;
  96         const char *c;
  97
  98         c = Cmd_Argv(1);
  99         if (c[0])
 100                 k = atoi(c);
 101         else
 102         { // typed manually at the console, assume for unsticking, so clear all
 103                 b->down[0] = b->down[1] = 0;
 104                 b->state = 4;   // impulse up
 105                 return;
 106         }
 107
 108         if (b->down[0] == k)
 109                 b->down[0] = 0;
 110         else if (b->down[1] == k)
 111                 b->down[1] = 0;
 112         else
 113                 return;         // key up without coresponding down (menu pass through)
 114         if (b->down[0] || b->down[1])
 115                 return;         // some other key is still holding it down
 116
 117         if (!(b->state & 1))
 118                 return;         // still up (this should not happen)
 119         b->state &= ~1;         // now up
 120         b->state |= 4;          // impulse up
 121 }
 122
 123 void IN_KLookDown (void) {KeyDown(&in_klook);}
 124 void IN_KLookUp (void) {KeyUp(&in_klook);}
 125 void IN_MLookDown (void) {KeyDown(&in_mlook);}
 126 void IN_MLookUp (void)
 127 {
 128         KeyUp(&in_mlook);
 129         if ( !(in_mlook.state&1) && lookspring.value)
 130                 V_StartPitchDrift();
 131 }
 132 void IN_UpDown(void) {KeyDown(&in_up);}
 133 void IN_UpUp(void) {KeyUp(&in_up);}
 134 void IN_DownDown(void) {KeyDown(&in_down);}
 135 void IN_DownUp(void) {KeyUp(&in_down);}
 136 void IN_LeftDown(void) {KeyDown(&in_left);}
 137 void IN_LeftUp(void) {KeyUp(&in_left);}
 138 void IN_RightDown(void) {KeyDown(&in_right);}
 139 void IN_RightUp(void) {KeyUp(&in_right);}
 140 void IN_ForwardDown(void) {KeyDown(&in_forward);}
 141 void IN_ForwardUp(void) {KeyUp(&in_forward);}
 142 void IN_BackDown(void) {KeyDown(&in_back);}
 143 void IN_BackUp(void) {KeyUp(&in_back);}
 144 void IN_LookupDown(void) {KeyDown(&in_lookup);}
 145 void IN_LookupUp(void) {KeyUp(&in_lookup);}
 146 void IN_LookdownDown(void) {KeyDown(&in_lookdown);}
 147 void IN_LookdownUp(void) {KeyUp(&in_lookdown);}
 148 void IN_MoveleftDown(void) {KeyDown(&in_moveleft);}
 149 void IN_MoveleftUp(void) {KeyUp(&in_moveleft);}
 150 void IN_MoverightDown(void) {KeyDown(&in_moveright);}
 151 void IN_MoverightUp(void) {KeyUp(&in_moveright);}
 152
 153 void IN_SpeedDown(void) {KeyDown(&in_speed);}
 154 void IN_SpeedUp(void) {KeyUp(&in_speed);}
 155 void IN_StrafeDown(void) {KeyDown(&in_strafe);}
 156 void IN_StrafeUp(void) {KeyUp(&in_strafe);}
 157
 158 void IN_AttackDown(void) {KeyDown(&in_attack);}
 159 void IN_AttackUp(void) {KeyUp(&in_attack);}
 160
 161 void IN_UseDown(void) {KeyDown(&in_use);}
 162 void IN_UseUp(void) {KeyUp(&in_use);}
 163
 164 // LordHavoc: added 6 new buttons
 165 void IN_Button3Down(void) {KeyDown(&in_button3);}
 166 void IN_Button3Up(void) {KeyUp(&in_button3);}
 167 void IN_Button4Down(void) {KeyDown(&in_button4);}
 168 void IN_Button4Up(void) {KeyUp(&in_button4);}
 169 void IN_Button5Down(void) {KeyDown(&in_button5);}
 170 void IN_Button5Up(void) {KeyUp(&in_button5);}
 171 void IN_Button6Down(void) {KeyDown(&in_button6);}
 172 void IN_Button6Up(void) {KeyUp(&in_button6);}
 173 void IN_Button7Down(void) {KeyDown(&in_button7);}
 174 void IN_Button7Up(void) {KeyUp(&in_button7);}
 175 void IN_Button8Down(void) {KeyDown(&in_button8);}
 176 void IN_Button8Up(void) {KeyUp(&in_button8);}
 177
 178 void IN_Button9Down(void) {KeyDown(&in_button9);}
 179 void IN_Button9Up(void) {KeyUp(&in_button9);}
 180 void IN_Button10Down(void) {KeyDown(&in_button10);}
 181 void IN_Button10Up(void) {KeyUp(&in_button10);}
 182 void IN_Button11Down(void) {KeyDown(&in_button11);}
 183 void IN_Button11Up(void) {KeyUp(&in_button11);}
 184 void IN_Button12Down(void) {KeyDown(&in_button12);}
 185 void IN_Button12Up(void) {KeyUp(&in_button12);}
 186 void IN_Button13Down(void) {KeyDown(&in_button13);}
 187 void IN_Button13Up(void) {KeyUp(&in_button13);}
 188 void IN_Button14Down(void) {KeyDown(&in_button14);}
 189 void IN_Button14Up(void) {KeyUp(&in_button14);}
 190 void IN_Button15Down(void) {KeyDown(&in_button15);}
 191 void IN_Button15Up(void) {KeyUp(&in_button15);}
 192 void IN_Button16Down(void) {KeyDown(&in_button16);}
 193 void IN_Button16Up(void) {KeyUp(&in_button16);}
 194
 195 void IN_JumpDown (void) {KeyDown(&in_jump);}
 196 void IN_JumpUp (void) {KeyUp(&in_jump);}
 197
 198 void IN_Impulse (void) {in_impulse=atoi(Cmd_Argv(1));}
 199
 200 in_bestweapon_info_t in_bestweapon_info[IN_BESTWEAPON_MAX];
 201
 202 void IN_BestWeapon_Register(const char *name, int impulse, int weaponbit, int activeweaponcode, int ammostat, int ammomin)
 203 {
 204         int i;
 205         for(i = 0; i < IN_BESTWEAPON_MAX && in_bestweapon_info[i].impulse; ++i)
 206                 if(in_bestweapon_info[i].impulse == impulse)
 207                         break;
 208         if(i >= IN_BESTWEAPON_MAX)
 209         {
 210                 Con_Printf("no slot left for weapon definition; increase IN_BESTWEAPON_MAX\n");
 211                 return; // sorry
 212         }
 213         strlcpy(in_bestweapon_info[i].name, name, sizeof(in_bestweapon_info[i].name));
 214         in_bestweapon_info[i].impulse = impulse;
 215         if(weaponbit != -1)
 216                 in_bestweapon_info[i].weaponbit = weaponbit;
 217         if(activeweaponcode != -1)
 218                 in_bestweapon_info[i].activeweaponcode = activeweaponcode;
 219         if(ammostat != -1)
 220                 in_bestweapon_info[i].ammostat = ammostat;
 221         if(ammomin != -1)
 222                 in_bestweapon_info[i].ammomin = ammomin;
 223 }
 224
 225 void IN_BestWeapon_ResetData (void)
 226 {
 227         memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
 228         IN_BestWeapon_Register("1", 1, IT_AXE, IT_AXE, STAT_SHELLS, 0);
 229         IN_BestWeapon_Register("2", 2, IT_SHOTGUN, IT_SHOTGUN, STAT_SHELLS, 1);
 230         IN_BestWeapon_Register("3", 3, IT_SUPER_SHOTGUN, IT_SUPER_SHOTGUN, STAT_SHELLS, 1);
 231         IN_BestWeapon_Register("4", 4, IT_NAILGUN, IT_NAILGUN, STAT_NAILS, 1);
 232         IN_BestWeapon_Register("5", 5, IT_SUPER_NAILGUN, IT_SUPER_NAILGUN, STAT_NAILS, 1);
 233         IN_BestWeapon_Register("6", 6, IT_GRENADE_LAUNCHER, IT_GRENADE_LAUNCHER, STAT_ROCKETS, 1);
 234         IN_BestWeapon_Register("7", 7, IT_ROCKET_LAUNCHER, IT_ROCKET_LAUNCHER, STAT_ROCKETS, 1);
 235         IN_BestWeapon_Register("8", 8, IT_LIGHTNING, IT_LIGHTNING, STAT_CELLS, 1);
 236         IN_BestWeapon_Register("9", 9, 128, 128, STAT_CELLS, 1); // generic energy weapon for mods
 237         IN_BestWeapon_Register("p", 209, 128, 128, STAT_CELLS, 1); // dpmod plasma gun
 238         IN_BestWeapon_Register("w", 210, 8388608, 8388608, STAT_CELLS, 1); // dpmod plasma wave cannon
 239         IN_BestWeapon_Register("l", 225, HIT_LASER_CANNON, HIT_LASER_CANNON, STAT_CELLS, 1); // hipnotic laser cannon
 240         IN_BestWeapon_Register("h", 226, HIT_MJOLNIR, HIT_MJOLNIR, STAT_CELLS, 0); // hipnotic mjolnir hammer
 241 }
 242
 243 void IN_BestWeapon_Register_f (void)
 244 {
 245         if(Cmd_Argc() == 7)
 246         {
 247                 IN_BestWeapon_Register(
 248                         Cmd_Argv(1),
 249                         atoi(Cmd_Argv(2)),
 250                         atoi(Cmd_Argv(3)),
 251                         atoi(Cmd_Argv(4)),
 252                         atoi(Cmd_Argv(5)),
 253                         atoi(Cmd_Argv(6))
 254                 );
 255         }
 256         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "clear"))
 257         {
 258                 memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
 259         }
 260         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "quake"))
 261         {
 262                 IN_BestWeapon_ResetData();
 263         }
 264         else
 265         {
 266                 Con_Printf("Usage: %s weaponshortname impulse itemcode activeweaponcode ammostat ammomin; %s clear; %s quake\n", Cmd_Argv(0), Cmd_Argv(0), Cmd_Argv(0));
 267         }
 268 }
 269
 270 void IN_BestWeapon (void)
 271 {
 272         int i, n;
 273         const char *t;
 274         if (Cmd_Argc() < 2)
 275         {
 276                 Con_Printf("bestweapon requires 1 or more parameters\n");
 277                 return;
 278         }
 279         for (i = 1;i < Cmd_Argc();i++)
 280         {
 281                 t = Cmd_Argv(i);
 282                 // figure out which weapon this character refers to
 283                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
 284                 {
 285                         if (!strcmp(in_bestweapon_info[n].name, t))
 286                         {
 287                                 // we found out what weapon this character refers to
 288                                 // check if the inventory contains the weapon and enough ammo
 289                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
 290                                 {
 291                                         // we found one of the weapons the player wanted
 292                                         // send an impulse to switch to it
 293                                         in_impulse = in_bestweapon_info[n].impulse;
 294                                         return;
 295                                 }
 296                                 break;
 297                         }
 298                 }
 299                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 300         }
 301         // if we couldn't find any of the weapons, there's nothing more we can do...
 302 }
 303
 304 #if 0
 305 void IN_CycleWeapon (void)
 306 {
 307         int i, n;
 308         int first = -1;
 309         qboolean found = false;
 310         const char *t;
 311         if (Cmd_Argc() < 2)
 312         {
 313                 Con_Printf("bestweapon requires 1 or more parameters\n");
 314                 return;
 315         }
 316         for (i = 1;i < Cmd_Argc();i++)
 317         {
 318                 t = Cmd_Argv(i);
 319                 // figure out which weapon this character refers to
 320                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
 321                 {
 322                         if (!strcmp(in_bestweapon_info[n].name, t))
 323                         {
 324                                 // we found out what weapon this character refers to
 325                                 // check if the inventory contains the weapon and enough ammo
 326                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
 327                                 {
 328                                         // we found one of the weapons the player wanted
 329                                         if(first == -1)
 330                                                 first = n;
 331                                         if(found)
 332                                         {
 333                                                 in_impulse = in_bestweapon_info[n].impulse;
 334                                                 return;
 335                                         }
 336                                         if(cl.stats[STAT_ACTIVEWEAPON] == in_bestweapon_info[n].activeweaponcode)
 337                                                 found = true;
 338                                 }
 339                                 break;
 340                         }
 341                 }
 342                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 343         }
 344         if(first != -1)
 345         {
 346                 in_impulse = in_bestweapon_info[first].impulse;
 347                 return;
 348         }
 349         // if we couldn't find any of the weapons, there's nothing more we can do...
 350 }
 351 #endif
 352
 353 /*
 354 ===============
 355 CL_KeyState
 356
 357 Returns 0.25 if a key was pressed and released during the frame,
 358 0.5 if it was pressed and held
 359 0 if held then released, and
 360 1.0 if held for the entire time
 361 ===============
 362 */
 363 float CL_KeyState (kbutton_t *key)
 364 {
 365         float           val;
 366         qboolean        impulsedown, impulseup, down;
 367
 368         impulsedown = (key->state & 2) != 0;
 369         impulseup = (key->state & 4) != 0;
 370         down = (key->state & 1) != 0;
 371         val = 0;
 372
 373         if (impulsedown && !impulseup)
 374         {
 375                 if (down)
 376                         val = 0.5;      // pressed and held this frame
 377                 else
 378                         val = 0;        //      I_Error ();
 379         }
 380         if (impulseup && !impulsedown)
 381         {
 382                 if (down)
 383                         val = 0;        //      I_Error ();
 384                 else
 385                         val = 0;        // released this frame
 386         }
 387         if (!impulsedown && !impulseup)
 388         {
 389                 if (down)
 390                         val = 1.0;      // held the entire frame
 391                 else
 392                         val = 0;        // up the entire frame
 393         }
 394         if (impulsedown && impulseup)
 395         {
 396                 if (down)
 397                         val = 0.75;     // released and re-pressed this frame
 398                 else
 399                         val = 0.25;     // pressed and released this frame
 400         }
 401
 402         key->state &= 1;                // clear impulses
 403
 404         return val;
 405 }
 406
 407
 408
 409
 410 //==========================================================================
 411
 412 cvar_t cl_upspeed = {CVAR_SAVE, "cl_upspeed","400","vertical movement speed (while swimming or flying)"};
 413 cvar_t cl_forwardspeed = {CVAR_SAVE, "cl_forwardspeed","400","forward movement speed"};
 414 cvar_t cl_backspeed = {CVAR_SAVE, "cl_backspeed","400","backward movement speed"};
 415 cvar_t cl_sidespeed = {CVAR_SAVE, "cl_sidespeed","350","strafe movement speed"};
 416
 417 cvar_t cl_movespeedkey = {CVAR_SAVE, "cl_movespeedkey","2.0","how much +speed multiplies keyboard movement speed"};
 418 cvar_t cl_movecliptokeyboard = {0, "cl_movecliptokeyboard", "0", "if set to 1, any move is clipped to the nine keyboard states; if set to 2, only the direction is clipped, not the amount"};
 419
 420 cvar_t cl_yawspeed = {CVAR_SAVE, "cl_yawspeed","140","keyboard yaw turning speed"};
 421 cvar_t cl_pitchspeed = {CVAR_SAVE, "cl_pitchspeed","150","keyboard pitch turning speed"};
 422
 423 cvar_t cl_anglespeedkey = {CVAR_SAVE, "cl_anglespeedkey","1.5","how much +speed multiplies keyboard turning speed"};
 424
 425 cvar_t cl_movement = {CVAR_SAVE, "cl_movement", "0", "enables clientside prediction of your player movement"};
 426 cvar_t cl_movement_nettimeout = {CVAR_SAVE, "cl_movement_nettimeout", "0.3", "stops predicting moves when server is lagging badly (avoids major performance problems), timeout in seconds"};
 427 cvar_t cl_movement_minping = {CVAR_SAVE, "cl_movement_minping", "0", "whether to use prediction when ping is lower than this value in milliseconds"};
 428 cvar_t cl_movement_track_canjump = {CVAR_SAVE, "cl_movement_track_canjump", "1", "track if the player released the jump key between two jumps to decide if he is able to jump or not; when off, this causes some \"sliding\" slightly above the floor when the jump key is held too long; if the mod allows repeated jumping by holding space all the time, this has to be set to zero too"};
 429 cvar_t cl_movement_maxspeed = {0, "cl_movement_maxspeed", "320", "how fast you can move (should match sv_maxspeed)"};
 430 cvar_t cl_movement_maxairspeed = {0, "cl_movement_maxairspeed", "30", "how fast you can move while in the air (should match sv_maxairspeed)"};
 431 cvar_t cl_movement_stopspeed = {0, "cl_movement_stopspeed", "100", "speed below which you will be slowed rapidly to a stop rather than sliding endlessly (should match sv_stopspeed)"};
 432 cvar_t cl_movement_friction = {0, "cl_movement_friction", "4", "how fast you slow down (should match sv_friction)"};
 433 cvar_t cl_movement_wallfriction = {0, "cl_movement_wallfriction", "1", "how fast you slow down while sliding along a wall (should match sv_wallfriction)"};
 434 cvar_t cl_movement_waterfriction = {0, "cl_movement_waterfriction", "-1", "how fast you slow down (should match sv_waterfriction), if less than 0 the cl_movement_friction variable is used instead"};
 435 cvar_t cl_movement_edgefriction = {0, "cl_movement_edgefriction", "1", "how much to slow down when you may be about to fall off a ledge (should match edgefriction)"};
 436 cvar_t cl_movement_stepheight = {0, "cl_movement_stepheight", "18", "how tall a step you can step in one instant (should match sv_stepheight)"};
 437 cvar_t cl_movement_accelerate = {0, "cl_movement_accelerate", "10", "how fast you accelerate (should match sv_accelerate)"};
 438 cvar_t cl_movement_airaccelerate = {0, "cl_movement_airaccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 439 cvar_t cl_movement_wateraccelerate = {0, "cl_movement_wateraccelerate", "-1", "how fast you accelerate while in water (should match sv_wateraccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 440 cvar_t cl_movement_jumpvelocity = {0, "cl_movement_jumpvelocity", "270", "how fast you move upward when you begin a jump (should match the quakec code)"};
 441 cvar_t cl_movement_airaccel_qw = {0, "cl_movement_airaccel_qw", "1", "ratio of QW-style air control as opposed to simple acceleration (reduces speed gain when zigzagging) (should match sv_airaccel_qw); when < 0, the speed is clamped against the maximum allowed forward speed after the move"};
 442 cvar_t cl_movement_airaccel_sideways_friction = {0, "cl_movement_airaccel_sideways_friction", "0", "anti-sideways movement stabilization (should match sv_airaccel_sideways_friction); when < 0, only so much friction is applied that braking (by accelerating backwards) cannot be stronger"};
 443
 444 cvar_t in_pitch_min = {0, "in_pitch_min", "-90", "how far downward you can aim (quake used -70"};
 445 cvar_t in_pitch_max = {0, "in_pitch_max", "90", "how far upward you can aim (quake used 80"};
 446
 447 cvar_t m_filter = {CVAR_SAVE, "m_filter","0", "smoothes mouse movement, less responsive but smoother aiming"};
 448 cvar_t m_accelerate = {CVAR_SAVE, "m_accelerate","1", "mouse acceleration factor (try 2)"};
 449 cvar_t m_accelerate_minspeed = {CVAR_SAVE, "m_accelerate_minspeed","5000", "below this speed, no acceleration is done"};
 450 cvar_t m_accelerate_maxspeed = {CVAR_SAVE, "m_accelerate_maxspeed","10000", "above this speed, full acceleration is done"};
 451 cvar_t m_accelerate_filter = {CVAR_SAVE, "m_accelerate_filter","0.1", "mouse acceleration factor filtering"};
 452
 453 cvar_t cl_netfps = {CVAR_SAVE, "cl_netfps","20", "how many input packets to send to server each second"};
 454 cvar_t cl_netrepeatinput = {CVAR_SAVE, "cl_netrepeatinput", "1", "how many packets in a row can be lost without movement issues when using cl_movement (technically how many input messages to repeat in each packet that have not yet been acknowledged by the server), only affects DP7 and later servers (Quake uses 0, QuakeWorld uses 2, and just for comparison Quake3 uses 1)"};
 455 cvar_t cl_netimmediatebuttons = {CVAR_SAVE, "cl_netimmediatebuttons", "1", "sends extra packets whenever your buttons change or an impulse is used (basically: whenever you click fire or change weapon)"};
 456
 457 cvar_t cl_nodelta = {0, "cl_nodelta", "0", "disables delta compression of non-player entities in QW network protocol"};
 458
 459 extern cvar_t v_flipped;
 460
 461 /*
 462 ================
 463 CL_AdjustAngles
 464
 465 Moves the local angle positions
 466 ================
 467 */
 468 void CL_AdjustAngles (void)
 469 {
 470         float   speed;
 471         float   up, down;
 472
 473         if (in_speed.state & 1)
 474                 speed = cl.realframetime * cl_anglespeedkey.value;
 475         else
 476                 speed = cl.realframetime;
 477
 478         if (!(in_strafe.state & 1))
 479         {
 480                 cl.viewangles[YAW] -= speed*cl_yawspeed.value*CL_KeyState (&in_right);
 481                 cl.viewangles[YAW] += speed*cl_yawspeed.value*CL_KeyState (&in_left);
 482         }
 483         if (in_klook.state & 1)
 484         {
 485                 V_StopPitchDrift ();
 486                 cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * CL_KeyState (&in_forward);
 487                 cl.viewangles[PITCH] += speed*cl_pitchspeed.value * CL_KeyState (&in_back);
 488         }
 489
 490         up = CL_KeyState (&in_lookup);
 491         down = CL_KeyState(&in_lookdown);
 492
 493         cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * up;
 494         cl.viewangles[PITCH] += speed*cl_pitchspeed.value * down;
 495
 496         if (up || down)
 497                 V_StopPitchDrift ();
 498
 499         cl.viewangles[YAW] = ANGLEMOD(cl.viewangles[YAW]);
 500         cl.viewangles[PITCH] = ANGLEMOD(cl.viewangles[PITCH]);
 501         if (cl.viewangles[YAW] >= 180)
 502                 cl.viewangles[YAW] -= 360;
 503         if (cl.viewangles[PITCH] >= 180)
 504                 cl.viewangles[PITCH] -= 360;
 505         cl.viewangles[PITCH] = bound(in_pitch_min.value, cl.viewangles[PITCH], in_pitch_max.value);
 506         cl.viewangles[ROLL] = bound(-180, cl.viewangles[ROLL], 180);
 507 }
 508
 509 int cl_ignoremousemoves = 2;
 510
 511 /*
 512 ================
 513 CL_Input
 514
 515 Send the intended movement message to the server
 516 ================
 517 */
 518 void CL_Input (void)
 519 {
 520         float mx, my;
 521         static float old_mouse_x = 0, old_mouse_y = 0;
 522
 523         // clamp before the move to prevent starting with bad angles
 524         CL_AdjustAngles ();
 525
 526         if(v_flipped.integer)
 527                 cl.viewangles[YAW] = -cl.viewangles[YAW];
 528
 529         // reset some of the command fields
 530         cl.cmd.forwardmove = 0;
 531         cl.cmd.sidemove = 0;
 532         cl.cmd.upmove = 0;
 533
 534         // get basic movement from keyboard
 535         if (in_strafe.state & 1)
 536         {
 537                 cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
 538                 cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
 539         }
 540
 541         cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
 542         cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);
 543
 544         cl.cmd.upmove += cl_upspeed.value * CL_KeyState (&in_up);
 545         cl.cmd.upmove -= cl_upspeed.value * CL_KeyState (&in_down);
 546
 547         if (! (in_klook.state & 1) )
 548         {
 549                 cl.cmd.forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
 550                 cl.cmd.forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
 551         }
 552
 553         // adjust for speed key
 554         if (in_speed.state & 1)
 555         {
 556                 cl.cmd.forwardmove *= cl_movespeedkey.value;
 557                 cl.cmd.sidemove *= cl_movespeedkey.value;
 558                 cl.cmd.upmove *= cl_movespeedkey.value;
 559         }
 560
 561         // allow mice or other external controllers to add to the move
 562         IN_Move ();
 563
 564         // apply m_accelerate if it is on
 565         if(m_accelerate.value > 1)
 566         {
 567                 static float averagespeed = 0;
 568                 float speed, f, mi, ma;
 569
 570                 speed = sqrt(in_mouse_x * in_mouse_x + in_mouse_y * in_mouse_y) / cl.realframetime;
 571                 if(m_accelerate_filter.value > 0)
 572                         f = bound(0, cl.realframetime / m_accelerate_filter.value, 1);
 573                 else
 574                         f = 1;
 575                 averagespeed = speed * f + averagespeed * (1 - f);
 576
 577                 mi = max(1, m_accelerate_minspeed.value);
 578                 ma = max(m_accelerate_minspeed.value + 1, m_accelerate_maxspeed.value);
 579
 580                 if(averagespeed <= mi)
 581                 {
 582                         f = 1;
 583                 }
 584                 else if(averagespeed >= ma)
 585                 {
 586                         f = m_accelerate.value;
 587                 }
 588                 else
 589                 {
 590                         /*
 591                         f = log(averagespeed);
 592                         mi = log(mi);
 593                         ma = log(ma);
 594                         */
 595                         f = averagespeed;
 596                         mi = mi;
 597                         ma = ma;
 598                         f = (f - mi) / (ma - mi) * (m_accelerate.value - 1) + 1;
 599                 }
 600
 601                 in_mouse_x *= f;
 602                 in_mouse_y *= f;
 603         }
 604
 605         // apply m_filter if it is on
 606         mx = in_mouse_x;
 607         my = in_mouse_y;
 608         if (m_filter.integer)
 609         {
 610                 in_mouse_x = (mx + old_mouse_x) * 0.5;
 611                 in_mouse_y = (my + old_mouse_y) * 0.5;
 612         }
 613         old_mouse_x = mx;
 614         old_mouse_y = my;
 615
 616         // ignore a mouse move if mouse was activated/deactivated this frame
 617         if (cl_ignoremousemoves)
 618         {
 619                 cl_ignoremousemoves--;
 620                 in_mouse_x = old_mouse_x = 0;
 621                 in_mouse_y = old_mouse_y = 0;
 622         }
 623
 624         // if not in menu, apply mouse move to viewangles/movement
 625         if (!key_consoleactive && key_dest == key_game && !cl.csqc_wantsmousemove)
 626         {
 627                 float modulatedsensitivity = sensitivity.value * cl.sensitivityscale;
 628                 if (cl_prydoncursor.integer)
 629                 {
 630                         // mouse interacting with the scene, mostly stationary view
 631                         V_StopPitchDrift();
 632                         cl.cmd.cursor_screen[0] += in_mouse_x * modulatedsensitivity / vid.width;
 633                         cl.cmd.cursor_screen[1] += in_mouse_y * modulatedsensitivity / vid.height;
 634                 }
 635                 else if (in_strafe.state & 1)
 636                 {
 637                         // strafing mode, all looking is movement
 638                         V_StopPitchDrift();
 639                         cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
 640                         if (noclip_anglehack)
 641                                 cl.cmd.upmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 642                         else
 643                                 cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 644                 }
 645                 else if ((in_mlook.state & 1) || freelook.integer)
 646                 {
 647                         // mouselook, lookstrafe causes turning to become strafing
 648                         V_StopPitchDrift();
 649                         if (lookstrafe.integer)
 650                                 cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
 651                         else
 652                                 cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
 653                         cl.viewangles[PITCH] += m_pitch.value * in_mouse_y * modulatedsensitivity * cl.viewzoom;
 654                 }
 655                 else
 656                 {
 657                         // non-mouselook, yaw turning and forward/back movement
 658                         cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
 659                         cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 660                 }
 661         }
 662         else // don't pitch drift when csqc is controlling the mouse
 663                 V_StopPitchDrift();
 664
 665         if(v_flipped.integer)
 666         {
 667                 cl.viewangles[YAW] = -cl.viewangles[YAW];
 668                 cl.cmd.sidemove = -cl.cmd.sidemove;
 669         }
 670
 671         // clamp after the move to prevent rendering with bad angles
 672         CL_AdjustAngles ();
 673
 674         if(cl_movecliptokeyboard.integer)
 675         {
 676                 vec_t f = 1;
 677                 if (in_speed.state & 1)
 678                         f *= cl_movespeedkey.value;
 679                 if(cl_movecliptokeyboard.integer == 2)
 680                 {
 681                         // digital direction, analog amount
 682                         vec_t wishvel_x, wishvel_y;
 683                         f *= max(cl_sidespeed.value, max(cl_forwardspeed.value, cl_backspeed.value));
 684                         wishvel_x = fabs(cl.cmd.forwardmove);
 685                         wishvel_y = fabs(cl.cmd.sidemove);
 686                         if(wishvel_x != 0 && wishvel_y != 0 && wishvel_x != wishvel_y)
 687                         {
 688                                 vec_t wishspeed = sqrt(wishvel_x * wishvel_x + wishvel_y * wishvel_y);
 689                                 if(wishvel_x >= 2 * wishvel_y)
 690                                 {
 691                                         // pure X motion
 692                                         if(cl.cmd.forwardmove > 0)
 693                                                 cl.cmd.forwardmove = wishspeed;
 694                                         else
 695                                                 cl.cmd.forwardmove = -wishspeed;
 696                                         cl.cmd.sidemove = 0;
 697                                 }
 698                                 else if(wishvel_y >= 2 * wishvel_x)
 699                                 {
 700                                         // pure Y motion
 701                                         cl.cmd.forwardmove = 0;
 702                                         if(cl.cmd.sidemove > 0)
 703                                                 cl.cmd.sidemove = wishspeed;
 704                                         else
 705                                                 cl.cmd.sidemove = -wishspeed;
 706                                 }
 707                                 else
 708                                 {
 709                                         // diagonal
 710                                         if(cl.cmd.forwardmove > 0)
 711                                                 cl.cmd.forwardmove = 0.70710678118654752440 * wishspeed;
 712                                         else
 713                                                 cl.cmd.forwardmove = -0.70710678118654752440 * wishspeed;
 714                                         if(cl.cmd.sidemove > 0)
 715                                                 cl.cmd.sidemove = 0.70710678118654752440 * wishspeed;
 716                                         else
 717                                                 cl.cmd.sidemove = -0.70710678118654752440 * wishspeed;
 718                                 }
 719                         }
 720                 }
 721                 else if(cl_movecliptokeyboard.integer)
 722                 {
 723                         // digital direction, digital amount
 724                         if(cl.cmd.sidemove >= cl_sidespeed.value * f * 0.5)
 725                                 cl.cmd.sidemove = cl_sidespeed.value * f;
 726                         else if(cl.cmd.sidemove <= -cl_sidespeed.value * f * 0.5)
 727                                 cl.cmd.sidemove = -cl_sidespeed.value * f;
 728                         else
 729                                 cl.cmd.sidemove = 0;
 730                         if(cl.cmd.forwardmove >= cl_forwardspeed.value * f * 0.5)
 731                                 cl.cmd.forwardmove = cl_forwardspeed.value * f;
 732                         else if(cl.cmd.forwardmove <= -cl_backspeed.value * f * 0.5)
 733                                 cl.cmd.forwardmove = -cl_backspeed.value * f;
 734                         else
 735                                 cl.cmd.forwardmove = 0;
 736                 }
 737         }
 738 }
 739
 740 #include "cl_collision.h"
 741
 742 void CL_UpdatePrydonCursor(void)
 743 {
 744         vec3_t temp;
 745
 746         if (!cl_prydoncursor.integer)
 747                 VectorClear(cl.cmd.cursor_screen);
 748
 749         /*
 750         if (cl.cmd.cursor_screen[0] < -1)
 751         {
 752                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - -1) * vid.width * sensitivity.value * cl.viewzoom;
 753                 cl.cmd.cursor_screen[0] = -1;
 754         }
 755         if (cl.cmd.cursor_screen[0] > 1)
 756         {
 757                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - 1) * vid.width * sensitivity.value * cl.viewzoom;
 758                 cl.cmd.cursor_screen[0] = 1;
 759         }
 760         if (cl.cmd.cursor_screen[1] < -1)
 761         {
 762                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - -1) * vid.height * sensitivity.value * cl.viewzoom;
 763                 cl.cmd.cursor_screen[1] = -1;
 764         }
 765         if (cl.cmd.cursor_screen[1] > 1)
 766         {
 767                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - 1) * vid.height * sensitivity.value * cl.viewzoom;
 768                 cl.cmd.cursor_screen[1] = 1;
 769         }
 770         */
 771         cl.cmd.cursor_screen[0] = bound(-1, cl.cmd.cursor_screen[0], 1);
 772         cl.cmd.cursor_screen[1] = bound(-1, cl.cmd.cursor_screen[1], 1);
 773         cl.cmd.cursor_screen[2] = 1;
 774
 775         // calculate current view matrix
 776         Matrix4x4_OriginFromMatrix(&r_refdef.view.matrix, cl.cmd.cursor_start);
 777         // calculate direction vector of cursor in viewspace by using frustum slopes
 778         VectorSet(temp, cl.cmd.cursor_screen[2] * 1000000, (v_flipped.integer ? -1 : 1) * cl.cmd.cursor_screen[0] * -r_refdef.view.frustum_x * 1000000, cl.cmd.cursor_screen[1] * -r_refdef.view.frustum_y * 1000000);
 779         Matrix4x4_Transform(&r_refdef.view.matrix, temp, cl.cmd.cursor_end);
 780         // trace from view origin to the cursor
 781         cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl.entities[cl.playerentity].render : NULL);
 782 }
 783
 784 typedef enum waterlevel_e
 785 {
 786         WATERLEVEL_NONE,
 787         WATERLEVEL_WETFEET,
 788         WATERLEVEL_SWIMMING,
 789         WATERLEVEL_SUBMERGED
 790 }
 791 waterlevel_t;
 792
 793 typedef struct cl_clientmovement_state_s
 794 {
 795         // position
 796         vec3_t origin;
 797         vec3_t velocity;
 798         // current bounding box (different if crouched vs standing)
 799         vec3_t mins;
 800         vec3_t maxs;
 801         // currently on the ground
 802         qboolean onground;
 803         // currently crouching
 804         qboolean crouched;
 805         // what kind of water (SUPERCONTENTS_LAVA for instance)
 806         int watertype;
 807         // how deep
 808         waterlevel_t waterlevel;
 809         // weird hacks when jumping out of water
 810         // (this is in seconds and counts down to 0)
 811         float waterjumptime;
 812
 813         // user command
 814         usercmd_t cmd;
 815 }
 816 cl_clientmovement_state_t;
 817
 818 #define NUMOFFSETS 27
 819 static vec3_t offsets[NUMOFFSETS] =
 820 {
 821 // 1 no nudge (just return the original if this test passes)
 822         { 0.000,  0.000,  0.000},
 823 // 6 simple nudges
 824         { 0.000,  0.000,  0.125}, { 0.000,  0.000, -0.125},
 825         {-0.125,  0.000,  0.000}, { 0.125,  0.000,  0.000},
 826         { 0.000, -0.125,  0.000}, { 0.000,  0.125,  0.000},
 827 // 4 diagonal flat nudges
 828         {-0.125, -0.125,  0.000}, { 0.125, -0.125,  0.000},
 829         {-0.125,  0.125,  0.000}, { 0.125,  0.125,  0.000},
 830 // 8 diagonal upward nudges
 831         {-0.125,  0.000,  0.125}, { 0.125,  0.000,  0.125},
 832         { 0.000, -0.125,  0.125}, { 0.000,  0.125,  0.125},
 833         {-0.125, -0.125,  0.125}, { 0.125, -0.125,  0.125},
 834         {-0.125,  0.125,  0.125}, { 0.125,  0.125,  0.125},
 835 // 8 diagonal downward nudges
 836         {-0.125,  0.000, -0.125}, { 0.125,  0.000, -0.125},
 837         { 0.000, -0.125, -0.125}, { 0.000,  0.125, -0.125},
 838         {-0.125, -0.125, -0.125}, { 0.125, -0.125, -0.125},
 839         {-0.125,  0.125, -0.125}, { 0.125,  0.125, -0.125},
 840 };
 841
 842 qboolean CL_ClientMovement_Unstick(cl_clientmovement_state_t *s)
 843 {
 844         int i;
 845         vec3_t neworigin;
 846         for (i = 0;i < NUMOFFSETS;i++)
 847         {
 848                 VectorAdd(offsets[i], s->origin, neworigin);
 849                 if (!CL_TraceBox(neworigin, cl.playercrouchmins, cl.playercrouchmaxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false).startsolid)
 850                 {
 851                         VectorCopy(neworigin, s->origin);
 852                         return true;
 853                 }
 854         }
 855         // if all offsets failed, give up
 856         return false;
 857 }
 858
 859 void CL_ClientMovement_UpdateStatus(cl_clientmovement_state_t *s)
 860 {
 861         vec3_t origin1, origin2;
 862         trace_t trace;
 863
 864         // make sure player is not stuck
 865         CL_ClientMovement_Unstick(s);
 866
 867         // set crouched
 868         if (s->cmd.crouch)
 869         {
 870                 // wants to crouch, this always works..
 871                 if (!s->crouched)
 872                         s->crouched = true;
 873         }
 874         else
 875         {
 876                 // wants to stand, if currently crouching we need to check for a
 877                 // low ceiling first
 878                 if (s->crouched)
 879                 {
 880                         trace = CL_TraceBox(s->origin, cl.playerstandmins, cl.playerstandmaxs, s->origin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 881                         if (!trace.startsolid)
 882                                 s->crouched = false;
 883                 }
 884         }
 885         if (s->crouched)
 886         {
 887                 VectorCopy(cl.playercrouchmins, s->mins);
 888                 VectorCopy(cl.playercrouchmaxs, s->maxs);
 889         }
 890         else
 891         {
 892                 VectorCopy(cl.playerstandmins, s->mins);
 893                 VectorCopy(cl.playerstandmaxs, s->maxs);
 894         }
 895
 896         // set onground
 897         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + 1);
 898         VectorSet(origin2, s->origin[0], s->origin[1], s->origin[2] - 1); // -2 causes clientside doublejump bug at above 150fps, raising that to 300fps :)
 899         trace = CL_TraceBox(origin1, s->mins, s->maxs, origin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 900         s->onground = trace.fraction < 1 && trace.plane.normal[2] > 0.7;
 901
 902         // set watertype/waterlevel
 903         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + s->mins[2] + 1);
 904         s->waterlevel = WATERLEVEL_NONE;
 905         s->watertype = CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK;
 906         if (s->watertype)
 907         {
 908                 s->waterlevel = WATERLEVEL_WETFEET;
 909                 origin1[2] = s->origin[2] + (s->mins[2] + s->maxs[2]) * 0.5f;
 910                 if (CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 911                 {
 912                         s->waterlevel = WATERLEVEL_SWIMMING;
 913                         origin1[2] = s->origin[2] + 22;
 914                         if (CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 915                                 s->waterlevel = WATERLEVEL_SUBMERGED;
 916                 }
 917         }
 918
 919         // water jump prediction
 920         if (s->onground || s->velocity[2] <= 0 || s->waterjumptime <= 0)
 921                 s->waterjumptime = 0;
 922 }
 923
 924 void CL_ClientMovement_Move(cl_clientmovement_state_t *s)
 925 {
 926         int bump;
 927         double t;
 928         vec_t f;
 929         vec3_t neworigin;
 930         vec3_t currentorigin2;
 931         vec3_t neworigin2;
 932         vec3_t primalvelocity;
 933         trace_t trace;
 934         trace_t trace2;
 935         trace_t trace3;
 936         CL_ClientMovement_UpdateStatus(s);
 937         VectorCopy(s->velocity, primalvelocity);
 938         for (bump = 0, t = s->cmd.frametime;bump < 8 && VectorLength2(s->velocity) > 0;bump++)
 939         {
 940                 VectorMA(s->origin, t, s->velocity, neworigin);
 941                 trace = CL_TraceBox(s->origin, s->mins, s->maxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 942                 if (trace.fraction < 1 && trace.plane.normal[2] == 0)
 943                 {
 944                         // may be a step or wall, try stepping up
 945                         // first move forward at a higher level
 946                         VectorSet(currentorigin2, s->origin[0], s->origin[1], s->origin[2] + cl.movevars_stepheight);
 947                         VectorSet(neworigin2, neworigin[0], neworigin[1], s->origin[2] + cl.movevars_stepheight);
 948                         trace2 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 949                         if (!trace2.startsolid)
 950                         {
 951                                 // then move down from there
 952                                 VectorCopy(trace2.endpos, currentorigin2);
 953                                 VectorSet(neworigin2, trace2.endpos[0], trace2.endpos[1], s->origin[2]);
 954                                 trace3 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 955                                 //Con_Printf("%f %f %f %f : %f %f %f %f : %f %f %f %f\n", trace.fraction, trace.endpos[0], trace.endpos[1], trace.endpos[2], trace2.fraction, trace2.endpos[0], trace2.endpos[1], trace2.endpos[2], trace3.fraction, trace3.endpos[0], trace3.endpos[1], trace3.endpos[2]);
 956                                 // accept the new trace if it made some progress
 957                                 if (fabs(trace3.endpos[0] - trace.endpos[0]) >= 0.03125 || fabs(trace3.endpos[1] - trace.endpos[1]) >= 0.03125)
 958                                 {
 959                                         trace = trace2;
 960                                         VectorCopy(trace3.endpos, trace.endpos);
 961                                 }
 962                         }
 963                 }
 964
 965                 // check if it moved at all
 966                 if (trace.fraction >= 0.001)
 967                         VectorCopy(trace.endpos, s->origin);
 968
 969                 // check if it moved all the way
 970                 if (trace.fraction == 1)
 971                         break;
 972
 973                 //if (trace.plane.normal[2] > 0.7)
 974                 //      s->onground = true;
 975
 976                 t -= t * trace.fraction;
 977
 978                 f = DotProduct(s->velocity, trace.plane.normal);
 979                 VectorMA(s->velocity, -f, trace.plane.normal, s->velocity);
 980         }
 981         if (s->waterjumptime > 0)
 982                 VectorCopy(primalvelocity, s->velocity);
 983 }
 984
 985
 986 void CL_ClientMovement_Physics_Swim(cl_clientmovement_state_t *s)
 987 {
 988         vec_t wishspeed;
 989         vec_t f;
 990         vec3_t wishvel;
 991         vec3_t wishdir;
 992
 993         // water jump only in certain situations
 994         // this mimics quakeworld code
 995         if (s->cmd.jump && s->waterlevel == 2 && s->velocity[2] >= -180)
 996         {
 997                 vec3_t forward;
 998                 vec3_t yawangles;
 999                 vec3_t spot;
1000                 VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
1001                 AngleVectors(yawangles, forward, NULL, NULL);
1002                 VectorMA(s->origin, 24, forward, spot);
1003                 spot[2] += 8;
1004                 if (CL_TracePoint(spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
1005                 {
1006                         spot[2] += 24;
1007                         if (!CL_TracePoint(spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
1008                         {
1009                                 VectorScale(forward, 50, s->velocity);
1010                                 s->velocity[2] = 310;
1011                                 s->waterjumptime = 2;
1012                                 s->onground = false;
1013                                 s->cmd.canjump = false;
1014                         }
1015                 }
1016         }
1017
1018         if (!(s->cmd.forwardmove*s->cmd.forwardmove + s->cmd.sidemove*s->cmd.sidemove + s->cmd.upmove*s->cmd.upmove))
1019         {
1020                 // drift towards bottom
1021                 VectorSet(wishvel, 0, 0, -60);
1022         }
1023         else
1024         {
1025                 // swim
1026                 vec3_t forward;
1027                 vec3_t right;
1028                 vec3_t up;
1029                 // calculate movement vector
1030                 AngleVectors(s->cmd.viewangles, forward, right, up);
1031                 VectorSet(up, 0, 0, 1);
1032                 VectorMAMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, s->cmd.upmove, up, wishvel);
1033         }
1034
1035         // split wishvel into wishspeed and wishdir
1036         wishspeed = VectorLength(wishvel);
1037         if (wishspeed)
1038                 VectorScale(wishvel, 1 / wishspeed, wishdir);
1039         else
1040                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
1041         wishspeed = min(wishspeed, cl.movevars_maxspeed) * 0.7;
1042
1043         if (s->crouched)
1044                 wishspeed *= 0.5;
1045
1046         if (s->waterjumptime <= 0)
1047         {
1048                 // water friction
1049                 f = 1 - s->cmd.frametime * cl.movevars_waterfriction * (cls.protocol == PROTOCOL_QUAKEWORLD ? s->waterlevel : 1);
1050                 f = bound(0, f, 1);
1051                 VectorScale(s->velocity, f, s->velocity);
1052
1053                 // water acceleration
1054                 f = wishspeed - DotProduct(s->velocity, wishdir);
1055                 if (f > 0)
1056                 {
1057                         f = min(cl.movevars_wateraccelerate * s->cmd.frametime * wishspeed, f);
1058                         VectorMA(s->velocity, f, wishdir, s->velocity);
1059                 }
1060
1061                 // holding jump button swims upward slowly
1062                 if (s->cmd.jump)
1063                 {
1064                         if (s->watertype & SUPERCONTENTS_LAVA)
1065                                 s->velocity[2] =  50;
1066                         else if (s->watertype & SUPERCONTENTS_SLIME)
1067                                 s->velocity[2] =  80;
1068                         else
1069                         {
1070                                 if (gamemode == GAME_NEXUIZ)
1071                                         s->velocity[2] = 200;
1072                                 else
1073                                         s->velocity[2] = 100;
1074                         }
1075                 }
1076         }
1077
1078         CL_ClientMovement_Move(s);
1079 }
1080
1081 void CL_ClientMovement_Physics_CPM_PM_Aircontrol(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
1082 {
1083         vec_t zspeed, speed, dot, k;
1084
1085         if(s->cmd.forwardmove == 0 || s->cmd.sidemove != 0)
1086                 return;
1087
1088         zspeed = s->velocity[2];
1089         s->velocity[2] = 0;
1090         speed = VectorNormalizeLength(s->velocity);
1091
1092         dot = DotProduct(s->velocity, wishdir);
1093         k = 32;
1094         k *= cl.movevars_aircontrol*dot*dot*s->cmd.frametime;
1095
1096         if(dot > 0) { // we can't change direction while slowing down
1097                 VectorMAM(speed, s->velocity, k, wishdir, s->velocity);
1098                 VectorNormalize(s->velocity);
1099         }
1100
1101         VectorScale(s->velocity, speed, s->velocity);
1102         s->velocity[2] = zspeed;
1103 }
1104
1105 void CL_ClientMovement_Physics_PM_Accelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed, vec_t wishspeed0, vec_t accel, vec_t accelqw, vec_t sidefric)
1106 {
1107         vec_t vel_straight;
1108         vec_t vel_z;
1109         vec3_t vel_perpend;
1110         vec_t step;
1111         vec3_t vel_xy;
1112         vec_t vel_xy_current;
1113         vec_t vel_xy_backward, vel_xy_forward;
1114         qboolean speedclamp;
1115
1116         speedclamp = (accelqw < 0);
1117         if(speedclamp)
1118                 accelqw = -accelqw;
1119
1120         if(cl.moveflags & MOVEFLAG_Q2AIRACCELERATE)
1121                 wishspeed0 = wishspeed; // don't need to emulate this Q1 bug
1122
1123         vel_straight = DotProduct(s->velocity, wishdir);
1124         vel_z = s->velocity[2];
1125         VectorCopy(s->velocity, vel_xy); vel_xy[2] -= vel_z;
1126         VectorMA(vel_xy, -vel_straight, wishdir, vel_perpend);
1127
1128         step = accel * s->cmd.frametime * wishspeed0;
1129
1130         vel_xy_current  = VectorLength(vel_xy);
1131         vel_xy_forward  = vel_xy_current + bound(0, wishspeed - vel_xy_current, step) * accelqw + step * (1 - accelqw);
1132         vel_xy_backward = vel_xy_current - bound(0, wishspeed + vel_xy_current, step) * accelqw - step * (1 - accelqw);
1133         if(vel_xy_backward < 0)
1134                 vel_xy_backward = 0; // not that it REALLY occurs that this would cause wrong behaviour afterwards
1135
1136         vel_straight    = vel_straight   + bound(0, wishspeed - vel_straight,   step) * accelqw + step * (1 - accelqw);
1137
1138         if(sidefric < 0 && VectorLength2(vel_perpend))
1139                 // negative: only apply so much sideways friction to stay below the speed you could get by "braking"
1140         {
1141                 vec_t f, fmin;
1142                 f = 1 - s->cmd.frametime * wishspeed * sidefric;
1143                 fmin = (vel_xy_backward*vel_xy_backward - vel_straight*vel_straight) / VectorLength2(vel_perpend);
1144                 if(fmin <= 0)
1145                         VectorScale(vel_perpend, f, vel_perpend);
1146                 else
1147                         VectorScale(vel_perpend, min(1.0f, max(fmin, f)), vel_perpend);
1148         }
1149         else
1150                 VectorScale(vel_perpend, 1 - s->cmd.frametime * wishspeed * sidefric, vel_perpend);
1151
1152         VectorMA(vel_perpend, vel_straight, wishdir, s->velocity);
1153
1154         if(speedclamp)
1155         {
1156                 vel_xy_current = min(VectorLength(s->velocity), vel_xy_forward);
1157                 if(vel_xy_current > 0) // prevent division by zero
1158                 {
1159                         VectorNormalize(s->velocity);
1160                         VectorScale(s->velocity, vel_xy_current, s->velocity);
1161                 }
1162         }
1163
1164         s->velocity[2] += vel_z;
1165 }
1166
1167 void CL_ClientMovement_Physics_PM_AirAccelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
1168 {
1169     vec3_t curvel, wishvel, acceldir, curdir;
1170     float addspeed, accelspeed, curspeed;
1171     float dot;
1172
1173     float airforwardaccel = cl.movevars_warsowbunny_airforwardaccel;
1174     float bunnyaccel = cl.movevars_warsowbunny_accel;
1175     float bunnytopspeed = cl.movevars_warsowbunny_topspeed;
1176     float turnaccel = cl.movevars_warsowbunny_turnaccel;
1177     float backtosideratio = cl.movevars_warsowbunny_backtosideratio;
1178
1179     if( !wishspeed )
1180         return;
1181
1182     VectorCopy( s->velocity, curvel );
1183     curvel[2] = 0;
1184     curspeed = VectorLength( curvel );
1185
1186     if( wishspeed > curspeed * 1.01f )
1187     {
1188         float accelspeed = curspeed + airforwardaccel * cl.movevars_maxairspeed * s->cmd.frametime;
1189         if( accelspeed < wishspeed )
1190             wishspeed = accelspeed;
1191     }
1192     else
1193     {
1194         float f = ( bunnytopspeed - curspeed ) / ( bunnytopspeed - cl.movevars_maxairspeed );
1195         if( f < 0 )
1196             f = 0;
1197         wishspeed = max( curspeed, cl.movevars_maxairspeed ) + bunnyaccel * f * cl.movevars_maxairspeed * s->cmd.frametime;
1198     }
1199     VectorScale( wishdir, wishspeed, wishvel );
1200     VectorSubtract( wishvel, curvel, acceldir );
1201     addspeed = VectorNormalizeLength( acceldir );
1202
1203     accelspeed = turnaccel * cl.movevars_maxairspeed /* wishspeed */ * s->cmd.frametime;
1204     if( accelspeed > addspeed )
1205         accelspeed = addspeed;
1206
1207     if( backtosideratio < 1.0f )
1208     {
1209         VectorNormalize2( curvel, curdir );
1210         dot = DotProduct( acceldir, curdir );
1211         if( dot < 0 )
1212             VectorMA( acceldir, -( 1.0f - backtosideratio ) * dot, curdir, acceldir );
1213     }
1214
1215     VectorMA( s->velocity, accelspeed, acceldir, s->velocity );
1216 }
1217
1218 void CL_ClientMovement_Physics_Walk(cl_clientmovement_state_t *s)
1219 {
1220         vec_t friction;
1221         vec_t wishspeed;
1222         vec_t addspeed;
1223         vec_t accelspeed;
1224         vec_t f;
1225         vec3_t forward;
1226         vec3_t right;
1227         vec3_t up;
1228         vec3_t wishvel;
1229         vec3_t wishdir;
1230         vec3_t yawangles;
1231         trace_t trace;
1232
1233         // jump if on ground with jump button pressed but only if it has been
1234         // released at least once since the last jump
1235         if (s->cmd.jump)
1236         {
1237                 if (s->onground && (s->cmd.canjump || !cl_movement_track_canjump.integer)) // FIXME remove this cvar again when canjump logic actually works, or maybe keep it for mods that allow "pogo-ing"
1238                 {
1239                         s->velocity[2] += cl.movevars_jumpvelocity;
1240                         s->onground = false;
1241                         s->cmd.canjump = false;
1242                 }
1243         }
1244         else
1245                 s->cmd.canjump = true;
1246
1247         // calculate movement vector
1248         VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
1249         AngleVectors(yawangles, forward, right, up);
1250         VectorMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, wishvel);
1251
1252         // split wishvel into wishspeed and wishdir
1253         wishspeed = VectorLength(wishvel);
1254         if (wishspeed)
1255                 VectorScale(wishvel, 1 / wishspeed, wishdir);
1256         else
1257                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
1258         // check if onground
1259         if (s->onground)
1260         {
1261                 wishspeed = min(wishspeed, cl.movevars_maxspeed);
1262                 if (s->crouched)
1263                         wishspeed *= 0.5;
1264
1265                 // apply edge friction
1266                 f = sqrt(s->velocity[0] * s->velocity[0] + s->velocity[1] * s->velocity[1]);
1267                 if (f > 0)
1268                 {
1269                         friction = cl.movevars_friction;
1270                         if (cl.movevars_edgefriction != 1)
1271                         {
1272                                 vec3_t neworigin2;
1273                                 vec3_t neworigin3;
1274                                 // note: QW uses the full player box for the trace, and yet still
1275                                 // uses s->origin[2] + s->mins[2], which is clearly an bug, but
1276                                 // this mimics it for compatibility
1277                                 VectorSet(neworigin2, s->origin[0] + s->velocity[0]*(16/f), s->origin[1] + s->velocity[1]*(16/f), s->origin[2] + s->mins[2]);
1278                                 VectorSet(neworigin3, neworigin2[0], neworigin2[1], neworigin2[2] - 34);
1279                                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1280                                         trace = CL_TraceBox(neworigin2, s->mins, s->maxs, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1281                                 else
1282                                         trace = CL_TraceLine(neworigin2, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1283                                 if (trace.fraction == 1 && !trace.startsolid)
1284                                         friction *= cl.movevars_edgefriction;
1285                         }
1286                         // apply ground friction
1287                         f = 1 - s->cmd.frametime * friction * ((f < cl.movevars_stopspeed) ? (cl.movevars_stopspeed / f) : 1);
1288                         f = max(f, 0);
1289                         VectorScale(s->velocity, f, s->velocity);
1290                 }
1291                 addspeed = wishspeed - DotProduct(s->velocity, wishdir);
1292                 if (addspeed > 0)
1293                 {
1294                         accelspeed = min(cl.movevars_accelerate * s->cmd.frametime * wishspeed, addspeed);
1295                         VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
1296                 }
1297                 s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
1298                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1299                         s->velocity[2] = 0;
1300                 if (VectorLength2(s->velocity))
1301                         CL_ClientMovement_Move(s);
1302         }
1303         else
1304         {
1305                 if (s->waterjumptime <= 0)
1306                 {
1307                         // apply air speed limit
1308                         vec_t accel, wishspeed0, wishspeed2, accelqw;
1309                         qboolean accelerating;
1310
1311                         accelqw = cl.movevars_airaccel_qw;
1312                         wishspeed0 = wishspeed;
1313                         wishspeed = min(wishspeed, cl.movevars_maxairspeed);
1314                         if (s->crouched)
1315                                 wishspeed *= 0.5;
1316                         accel = cl.movevars_airaccelerate;
1317
1318                         accelerating = (DotProduct(s->velocity, wishdir) > 0);
1319                         wishspeed2 = wishspeed;
1320
1321                         // CPM: air control
1322                         if(cl.movevars_airstopaccelerate != 0)
1323                                 if(DotProduct(s->velocity, wishdir) < 0)
1324                                         accel = cl.movevars_airstopaccelerate;
1325                         if(s->cmd.forwardmove == 0 && s->cmd.sidemove != 0)
1326                         {
1327                                 if(cl.movevars_maxairstrafespeed)
1328                                 {
1329                                         if(wishspeed > cl.movevars_maxairstrafespeed)
1330                                                 wishspeed = cl.movevars_maxairstrafespeed;
1331                                         if(cl.movevars_maxairstrafespeed < cl.movevars_maxairspeed)
1332                                                 accelqw = 1;
1333                                                 // otherwise, CPMA-style air acceleration misbehaves a lot
1334                                                 // if partially non-QW acceleration is used (as in, strafing
1335                                                 // would get faster than moving forward straight)
1336                                 }
1337                                 if(cl.movevars_airstrafeaccelerate)
1338                                 {
1339                                         accel = cl.movevars_airstrafeaccelerate;
1340                                         if(cl.movevars_airstrafeaccelerate > cl.movevars_airaccelerate)
1341                                                 accelqw = 1;
1342                                                 // otherwise, CPMA-style air acceleration misbehaves a lot
1343                                                 // if partially non-QW acceleration is used (as in, strafing
1344                                                 // would get faster than moving forward straight)
1345                                 }
1346                         }
1347                         // !CPM
1348
1349                         if(cl.movevars_warsowbunny_turnaccel && accelerating && s->cmd.sidemove == 0 && s->cmd.forwardmove != 0)
1350                                 CL_ClientMovement_Physics_PM_AirAccelerate(s, wishdir, wishspeed2);
1351                         else
1352                                 CL_ClientMovement_Physics_PM_Accelerate(s, wishdir, wishspeed, wishspeed0, accel, accelqw, cl.movevars_airaccel_sideways_friction / cl.movevars_maxairspeed);
1353
1354                         if(cl.movevars_aircontrol)
1355                                 CL_ClientMovement_Physics_CPM_PM_Aircontrol(s, wishdir, wishspeed2);
1356                 }
1357                 s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
1358                 CL_ClientMovement_Move(s);
1359         }
1360 }
1361
1362 void CL_ClientMovement_PlayerMove(cl_clientmovement_state_t *s)
1363 {
1364         //Con_Printf(" %f", frametime);
1365         if (!s->cmd.jump)
1366                 s->cmd.canjump = true;
1367         s->waterjumptime -= s->cmd.frametime;
1368         CL_ClientMovement_UpdateStatus(s);
1369         if (s->waterlevel >= WATERLEVEL_SWIMMING)
1370                 CL_ClientMovement_Physics_Swim(s);
1371         else
1372                 CL_ClientMovement_Physics_Walk(s);
1373 }
1374
1375 extern cvar_t slowmo;
1376 void CL_UpdateMoveVars(void)
1377 {
1378         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1379         {
1380                 cl.moveflags = 0;
1381         }
1382         else if (cl.stats[STAT_MOVEVARS_TICRATE])
1383         {
1384                 cl.moveflags = cl.stats[STAT_MOVEFLAGS];
1385                 cl.movevars_ticrate = cl.statsf[STAT_MOVEVARS_TICRATE];
1386                 cl.movevars_timescale = cl.statsf[STAT_MOVEVARS_TIMESCALE];
1387                 cl.movevars_gravity = cl.statsf[STAT_MOVEVARS_GRAVITY];
1388                 cl.movevars_stopspeed = cl.statsf[STAT_MOVEVARS_STOPSPEED] ;
1389                 cl.movevars_maxspeed = cl.statsf[STAT_MOVEVARS_MAXSPEED];
1390                 cl.movevars_spectatormaxspeed = cl.statsf[STAT_MOVEVARS_SPECTATORMAXSPEED];
1391                 cl.movevars_accelerate = cl.statsf[STAT_MOVEVARS_ACCELERATE];
1392                 cl.movevars_airaccelerate = cl.statsf[STAT_MOVEVARS_AIRACCELERATE];
1393                 cl.movevars_wateraccelerate = cl.statsf[STAT_MOVEVARS_WATERACCELERATE];
1394                 cl.movevars_entgravity = cl.statsf[STAT_MOVEVARS_ENTGRAVITY];
1395                 cl.movevars_jumpvelocity = cl.statsf[STAT_MOVEVARS_JUMPVELOCITY];
1396                 cl.movevars_edgefriction = cl.statsf[STAT_MOVEVARS_EDGEFRICTION];
1397                 cl.movevars_maxairspeed = cl.statsf[STAT_MOVEVARS_MAXAIRSPEED];
1398                 cl.movevars_stepheight = cl.statsf[STAT_MOVEVARS_STEPHEIGHT];
1399                 cl.movevars_airaccel_qw = cl.statsf[STAT_MOVEVARS_AIRACCEL_QW];
1400                 cl.movevars_airaccel_sideways_friction = cl.statsf[STAT_MOVEVARS_AIRACCEL_SIDEWAYS_FRICTION];
1401                 cl.movevars_friction = cl.statsf[STAT_MOVEVARS_FRICTION];
1402                 cl.movevars_wallfriction = cl.statsf[STAT_MOVEVARS_WALLFRICTION];
1403                 cl.movevars_waterfriction = cl.statsf[STAT_MOVEVARS_WATERFRICTION];
1404                 cl.movevars_airstopaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTOPACCELERATE];
1405                 cl.movevars_airstrafeaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTRAFEACCELERATE];
1406                 cl.movevars_maxairstrafespeed = cl.statsf[STAT_MOVEVARS_MAXAIRSTRAFESPEED];
1407                 cl.movevars_aircontrol = cl.statsf[STAT_MOVEVARS_AIRCONTROL];
1408                 cl.movevars_warsowbunny_airforwardaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_AIRFORWARDACCEL];
1409                 cl.movevars_warsowbunny_accel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_ACCEL];
1410                 cl.movevars_warsowbunny_topspeed = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TOPSPEED];
1411                 cl.movevars_warsowbunny_turnaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TURNACCEL];
1412                 cl.movevars_warsowbunny_backtosideratio = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_BACKTOSIDERATIO];
1413         }
1414         else
1415         {
1416                 cl.moveflags = 0;
1417                 cl.movevars_ticrate = slowmo.value / bound(1.0f, cl_netfps.value, 1000.0f);
1418                 cl.movevars_timescale = slowmo.value;
1419                 cl.movevars_gravity = sv_gravity.value;
1420                 cl.movevars_stopspeed = cl_movement_stopspeed.value;
1421                 cl.movevars_maxspeed = cl_movement_maxspeed.value;
1422                 cl.movevars_spectatormaxspeed = cl_movement_maxspeed.value;
1423                 cl.movevars_accelerate = cl_movement_accelerate.value;
1424                 cl.movevars_airaccelerate = cl_movement_airaccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_airaccelerate.value;
1425                 cl.movevars_wateraccelerate = cl_movement_wateraccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_wateraccelerate.value;
1426                 cl.movevars_friction = cl_movement_friction.value;
1427                 cl.movevars_wallfriction = cl_movement_wallfriction.value;
1428                 cl.movevars_waterfriction = cl_movement_waterfriction.value < 0 ? cl_movement_friction.value : cl_movement_waterfriction.value;
1429                 cl.movevars_entgravity = 1;
1430                 cl.movevars_jumpvelocity = cl_movement_jumpvelocity.value;
1431                 cl.movevars_edgefriction = cl_movement_edgefriction.value;
1432                 cl.movevars_maxairspeed = cl_movement_maxairspeed.value;
1433                 cl.movevars_stepheight = cl_movement_stepheight.value;
1434                 cl.movevars_airaccel_qw = cl_movement_airaccel_qw.value;
1435                 cl.movevars_airaccel_sideways_friction = cl_movement_airaccel_sideways_friction.value;
1436                 cl.movevars_airstopaccelerate = 0;
1437                 cl.movevars_airstrafeaccelerate = 0;
1438                 cl.movevars_maxairstrafespeed = 0;
1439                 cl.movevars_aircontrol = 0;
1440                 cl.movevars_warsowbunny_airforwardaccel = 0;
1441                 cl.movevars_warsowbunny_accel = 0;
1442                 cl.movevars_warsowbunny_topspeed = 0;
1443                 cl.movevars_warsowbunny_turnaccel = 0;
1444                 cl.movevars_warsowbunny_backtosideratio = 0;
1445         }
1446
1447         if(!(cl.moveflags & MOVEFLAG_VALID))
1448         {
1449                 if(gamemode == GAME_NEXUIZ)
1450                         cl.moveflags = MOVEFLAG_Q2AIRACCELERATE;
1451         }
1452 }
1453
1454 void CL_ClientMovement_Replay(void)
1455 {
1456         int i;
1457         double totalmovemsec;
1458         cl_clientmovement_state_t s;
1459
1460         if (cl.movement_predicted && !cl.movement_replay)
1461                 return;
1462
1463         // set up starting state for the series of moves
1464         memset(&s, 0, sizeof(s));
1465         VectorCopy(cl.entities[cl.playerentity].state_current.origin, s.origin);
1466         VectorCopy(cl.mvelocity[0], s.velocity);
1467         s.crouched = true; // will be updated on first move
1468         //Con_Printf("movement replay starting org %f %f %f vel %f %f %f\n", s.origin[0], s.origin[1], s.origin[2], s.velocity[0], s.velocity[1], s.velocity[2]);
1469
1470         totalmovemsec = 0;
1471         for (i = 0;i < CL_MAX_USERCMDS;i++)
1472                 if (cl.movecmd[i].sequence > cls.servermovesequence)
1473                         totalmovemsec += cl.movecmd[i].msec;
1474         cl.movement_predicted = totalmovemsec >= cl_movement_minping.value && cls.servermovesequence && (cl_movement.integer && !cls.demoplayback && cls.signon == SIGNONS && cl.stats[STAT_HEALTH] > 0 && !cl.intermission);
1475         //Con_Printf("%i = %.0f >= %.0f && %i && (%i && %i && %i == %i && %i > 0 && %i\n", cl.movement_predicted, totalmovemsec, cl_movement_minping.value, cls.servermovesequence, cl_movement.integer, !cls.demoplayback, cls.signon, SIGNONS, cl.stats[STAT_HEALTH], !cl.intermission);
1476         if (cl.movement_predicted)
1477         {
1478                 //Con_Printf("%ims\n", cl.movecmd[0].msec);
1479
1480                 // replay the input queue to predict current location
1481                 // note: this relies on the fact there's always one queue item at the end
1482
1483                 // find how many are still valid
1484                 for (i = 0;i < CL_MAX_USERCMDS;i++)
1485                         if (cl.movecmd[i].sequence <= cls.servermovesequence)
1486                                 break;
1487                 // now walk them in oldest to newest order
1488                 for (i--;i >= 0;i--)
1489                 {
1490                         s.cmd = cl.movecmd[i];
1491                         if (i < CL_MAX_USERCMDS - 1)
1492                                 s.cmd.canjump = cl.movecmd[i+1].canjump;
1493                         // if a move is more than 50ms, do it as two moves (matching qwsv)
1494                         //Con_Printf("%i ", s.cmd.msec);
1495                         if(s.cmd.frametime > 0.0005)
1496                         {
1497                                 if (s.cmd.frametime > 0.05)
1498                                 {
1499                                         s.cmd.frametime /= 2;
1500                                         CL_ClientMovement_PlayerMove(&s);
1501                                 }
1502                                 CL_ClientMovement_PlayerMove(&s);
1503                                 cl.movecmd[i].canjump = s.cmd.canjump;
1504                         }
1505                 }
1506                 //Con_Printf("\n");
1507                 CL_ClientMovement_UpdateStatus(&s);
1508         }
1509         else
1510         {
1511                 // get the first movement queue entry to know whether to crouch and such
1512                 s.cmd = cl.movecmd[0];
1513         }
1514
1515         if (cls.demoplayback) // for bob, speedometer
1516                 VectorCopy(cl.mvelocity[0], cl.movement_velocity);
1517         else
1518         {
1519                 cl.movement_replay = false;
1520                 // update the interpolation target position and velocity
1521                 VectorCopy(s.origin, cl.movement_origin);
1522                 VectorCopy(s.velocity, cl.movement_velocity);
1523         }
1524
1525         // update the onground flag if appropriate
1526         if (cl.movement_predicted)
1527         {
1528                 // when predicted we simply set the flag according to the UpdateStatus
1529                 cl.onground = s.onground;
1530         }
1531         else
1532         {
1533                 // when not predicted, cl.onground is cleared by cl_parse.c each time
1534                 // an update packet is received, but can be forced on here to hide
1535                 // server inconsistencies in the onground flag
1536                 // (which mostly occur when stepping up stairs at very high framerates
1537                 //  where after the step up the move continues forward and not
1538                 //  downward so the ground is not detected)
1539                 //
1540                 // such onground inconsistencies can cause jittery gun bobbing and
1541                 // stair smoothing, so we set onground if UpdateStatus says so
1542                 if (s.onground)
1543                         cl.onground = true;
1544         }
1545
1546         // react to onground state changes (for gun bob)
1547         if (cl.onground)
1548         {
1549                 if (!cl.oldonground)
1550                         cl.hitgroundtime = cl.movecmd[0].time;
1551                 cl.lastongroundtime = cl.movecmd[0].time;
1552         }
1553         cl.oldonground = cl.onground;
1554 }
1555
1556 void QW_MSG_WriteDeltaUsercmd(sizebuf_t *buf, usercmd_t *from, usercmd_t *to)
1557 {
1558         int bits;
1559
1560         bits = 0;
1561         if (to->viewangles[0] != from->viewangles[0])
1562                 bits |= QW_CM_ANGLE1;
1563         if (to->viewangles[1] != from->viewangles[1])
1564                 bits |= QW_CM_ANGLE2;
1565         if (to->viewangles[2] != from->viewangles[2])
1566                 bits |= QW_CM_ANGLE3;
1567         if (to->forwardmove != from->forwardmove)
1568                 bits |= QW_CM_FORWARD;
1569         if (to->sidemove != from->sidemove)
1570                 bits |= QW_CM_SIDE;
1571         if (to->upmove != from->upmove)
1572                 bits |= QW_CM_UP;
1573         if (to->buttons != from->buttons)
1574                 bits |= QW_CM_BUTTONS;
1575         if (to->impulse != from->impulse)
1576                 bits |= QW_CM_IMPULSE;
1577
1578         MSG_WriteByte(buf, bits);
1579         if (bits & QW_CM_ANGLE1)
1580                 MSG_WriteAngle16i(buf, to->viewangles[0]);
1581         if (bits & QW_CM_ANGLE2)
1582                 MSG_WriteAngle16i(buf, to->viewangles[1]);
1583         if (bits & QW_CM_ANGLE3)
1584                 MSG_WriteAngle16i(buf, to->viewangles[2]);
1585         if (bits & QW_CM_FORWARD)
1586                 MSG_WriteShort(buf, (short) to->forwardmove);
1587         if (bits & QW_CM_SIDE)
1588                 MSG_WriteShort(buf, (short) to->sidemove);
1589         if (bits & QW_CM_UP)
1590                 MSG_WriteShort(buf, (short) to->upmove);
1591         if (bits & QW_CM_BUTTONS)
1592                 MSG_WriteByte(buf, to->buttons);
1593         if (bits & QW_CM_IMPULSE)
1594                 MSG_WriteByte(buf, to->impulse);
1595         MSG_WriteByte(buf, to->msec);
1596 }
1597
1598 void CL_NewFrameReceived(int num)
1599 {
1600         if (developer_networkentities.integer >= 10)
1601                 Con_Printf("recv: svc_entities %i\n", num);
1602         cl.latestframenums[cl.latestframenumsposition] = num;
1603         cl.latestsendnums[cl.latestframenumsposition] = cl.cmd.sequence;
1604         cl.latestframenumsposition = (cl.latestframenumsposition + 1) % LATESTFRAMENUMS;
1605 }
1606
1607 /*
1608 ==============
1609 CL_SendMove
1610 ==============
1611 */
1612 usercmd_t nullcmd; // for delta compression of qw moves
1613 void CL_SendMove(void)
1614 {
1615         int i, j, packetloss;
1616         int checksumindex;
1617         int bits;
1618         int maxusercmds;
1619         usercmd_t *cmd;
1620         sizebuf_t buf;
1621         unsigned char data[1024];
1622         double packettime;
1623         int msecdelta;
1624         qboolean quemove;
1625         qboolean important;
1626
1627         // if playing a demo, do nothing
1628         if (!cls.netcon)
1629                 return;
1630
1631         // we don't que moves during a lag spike (potential network timeout)
1632         quemove = realtime - cl.last_received_message < cl_movement_nettimeout.value;
1633
1634         // we build up cl.cmd and then decide whether to send or not
1635         // we store this into cl.movecmd[0] for prediction each frame even if we
1636         // do not send, to make sure that prediction is instant
1637         cl.cmd.time = cl.time;
1638         cl.cmd.sequence = cls.netcon->outgoing_unreliable_sequence;
1639
1640         // set button bits
1641         // LordHavoc: added 6 new buttons and use and chat buttons, and prydon cursor active button
1642         bits = 0;
1643         if (in_attack.state   & 3) bits |=   1;
1644         if (in_jump.state     & 3) bits |=   2;
1645         if (in_button3.state  & 3) bits |=   4;
1646         if (in_button4.state  & 3) bits |=   8;
1647         if (in_button5.state  & 3) bits |=  16;
1648         if (in_button6.state  & 3) bits |=  32;
1649         if (in_button7.state  & 3) bits |=  64;
1650         if (in_button8.state  & 3) bits |= 128;
1651         if (in_use.state      & 3) bits |= 256;
1652         if (key_dest != key_game || key_consoleactive) bits |= 512;
1653         if (cl_prydoncursor.integer) bits |= 1024;
1654         if (in_button9.state  & 3)  bits |=   2048;
1655         if (in_button10.state  & 3) bits |=   4096;
1656         if (in_button11.state  & 3) bits |=   8192;
1657         if (in_button12.state  & 3) bits |=  16384;
1658         if (in_button13.state  & 3) bits |=  32768;
1659         if (in_button14.state  & 3) bits |=  65536;
1660         if (in_button15.state  & 3) bits |= 131072;
1661         if (in_button16.state  & 3) bits |= 262144;
1662         // button bits 19-31 unused currently
1663         // rotate/zoom view serverside if PRYDON_CLIENTCURSOR cursor is at edge of screen
1664         if (cl.cmd.cursor_screen[0] <= -1) bits |= 8;
1665         if (cl.cmd.cursor_screen[0] >=  1) bits |= 16;
1666         if (cl.cmd.cursor_screen[1] <= -1) bits |= 32;
1667         if (cl.cmd.cursor_screen[1] >=  1) bits |= 64;
1668
1669         // set buttons and impulse
1670         cl.cmd.buttons = bits;
1671         cl.cmd.impulse = in_impulse;
1672
1673         // set viewangles
1674         VectorCopy(cl.viewangles, cl.cmd.viewangles);
1675
1676         msecdelta = (int)(floor(cl.cmd.time * 1000) - floor(cl.movecmd[1].time * 1000));
1677         cl.cmd.msec = (unsigned char)bound(0, msecdelta, 255);
1678         // ridiculous value rejection (matches qw)
1679         if (cl.cmd.msec > 250)
1680                 cl.cmd.msec = 100;
1681         cl.cmd.frametime = cl.cmd.msec * (1.0 / 1000.0);
1682
1683         cl.cmd.predicted = cl_movement.integer != 0;
1684
1685         // movement is set by input code (forwardmove/sidemove/upmove)
1686         // always dump the first two moves, because they may contain leftover inputs from the last level
1687         if (cl.cmd.sequence <= 2)
1688                 cl.cmd.forwardmove = cl.cmd.sidemove = cl.cmd.upmove = cl.cmd.impulse = cl.cmd.buttons = 0;
1689
1690         cl.cmd.jump = (cl.cmd.buttons & 2) != 0;
1691         cl.cmd.crouch = 0;
1692         switch (cls.protocol)
1693         {
1694         case PROTOCOL_QUAKEWORLD:
1695         case PROTOCOL_QUAKE:
1696         case PROTOCOL_QUAKEDP:
1697         case PROTOCOL_NEHAHRAMOVIE:
1698         case PROTOCOL_NEHAHRABJP:
1699         case PROTOCOL_NEHAHRABJP2:
1700         case PROTOCOL_NEHAHRABJP3:
1701         case PROTOCOL_DARKPLACES1:
1702         case PROTOCOL_DARKPLACES2:
1703         case PROTOCOL_DARKPLACES3:
1704         case PROTOCOL_DARKPLACES4:
1705         case PROTOCOL_DARKPLACES5:
1706                 break;
1707         case PROTOCOL_DARKPLACES6:
1708         case PROTOCOL_DARKPLACES7:
1709                 // FIXME: cl.cmd.buttons & 16 is +button5, Nexuiz specific
1710                 cl.cmd.crouch = (cl.cmd.buttons & 16) != 0;
1711                 break;
1712         case PROTOCOL_UNKNOWN:
1713                 break;
1714         }
1715
1716         if (quemove)
1717                 cl.movecmd[0] = cl.cmd;
1718
1719         // don't predict more than 200fps
1720         if (realtime >= cl.lastpackettime + 0.005)
1721                 cl.movement_replay = true; // redo the prediction
1722
1723         // now decide whether to actually send this move
1724         // (otherwise it is only for prediction)
1725
1726         // don't send too often or else network connections can get clogged by a
1727         // high renderer framerate
1728         packettime = 1.0 / bound(1, cl_netfps.value, 1000);
1729         if (cl.movevars_timescale && cl.movevars_ticrate)
1730         {
1731                 float maxtic = cl.movevars_ticrate / cl.movevars_timescale;
1732                 packettime = min(packettime, maxtic);
1733         }
1734
1735         // do not send 0ms packets because they mess up physics
1736         if(cl.cmd.msec == 0 && cl.time > cl.oldtime && (cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS))
1737                 return;
1738         // always send if buttons changed or an impulse is pending
1739         // even if it violates the rate limit!
1740         important = (cl.cmd.impulse || (cl_netimmediatebuttons.integer && cl.cmd.buttons != cl.movecmd[1].buttons));
1741         // don't send too often (cl_netfps)
1742         if (!important && realtime < cl.lastpackettime + packettime)
1743                 return;
1744         // don't choke the connection with packets (obey rate limit)
1745         // it is important that this check be last, because it adds a new
1746         // frame to the shownetgraph output and any cancelation after this
1747         // will produce a nasty spike-like look to the netgraph
1748         // we also still send if it is important
1749         if (!NetConn_CanSend(cls.netcon) && !important)
1750                 return;
1751         // try to round off the lastpackettime to a multiple of the packet interval
1752         // (this causes it to emit packets at a steady beat)
1753         if (packettime > 0)
1754                 cl.lastpackettime = floor(realtime / packettime) * packettime;
1755         else
1756                 cl.lastpackettime = realtime;
1757
1758         buf.maxsize = sizeof(data);
1759         buf.cursize = 0;
1760         buf.data = data;
1761
1762         // send the movement message
1763         // PROTOCOL_QUAKE        clc_move = 16 bytes total
1764         // PROTOCOL_QUAKEDP      clc_move = 16 bytes total
1765         // PROTOCOL_NEHAHRAMOVIE clc_move = 16 bytes total
1766         // PROTOCOL_DARKPLACES1  clc_move = 19 bytes total
1767         // PROTOCOL_DARKPLACES2  clc_move = 25 bytes total
1768         // PROTOCOL_DARKPLACES3  clc_move = 25 bytes total
1769         // PROTOCOL_DARKPLACES4  clc_move = 19 bytes total
1770         // PROTOCOL_DARKPLACES5  clc_move = 19 bytes total
1771         // PROTOCOL_DARKPLACES6  clc_move = 52 bytes total
1772         // PROTOCOL_DARKPLACES7  clc_move = 56 bytes total per move (can be up to 16 moves)
1773         // PROTOCOL_QUAKEWORLD   clc_move = 34 bytes total (typically, but can reach 43 bytes, or even 49 bytes with roll)
1774
1775         // set prydon cursor info
1776         CL_UpdatePrydonCursor();
1777
1778         if (cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS)
1779         {
1780                 switch (cls.protocol)
1781                 {
1782                 case PROTOCOL_QUAKEWORLD:
1783                         MSG_WriteByte(&buf, qw_clc_move);
1784                         // save the position for a checksum byte
1785                         checksumindex = buf.cursize;
1786                         MSG_WriteByte(&buf, 0);
1787                         // packet loss percentage
1788                         for (j = 0, packetloss = 0;j < NETGRAPH_PACKETS;j++)
1789                                 if (cls.netcon->incoming_netgraph[j].unreliablebytes == NETGRAPH_LOSTPACKET)
1790                                         packetloss++;
1791                         packetloss = packetloss * 100 / NETGRAPH_PACKETS;
1792                         MSG_WriteByte(&buf, packetloss);
1793                         // write most recent 3 moves
1794                         QW_MSG_WriteDeltaUsercmd(&buf, &nullcmd, &cl.movecmd[2]);
1795                         QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[2], &cl.movecmd[1]);
1796                         QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[1], &cl.cmd);
1797                         // calculate the checksum
1798                         buf.data[checksumindex] = COM_BlockSequenceCRCByteQW(buf.data + checksumindex + 1, buf.cursize - checksumindex - 1, cls.netcon->outgoing_unreliable_sequence);
1799                         // if delta compression history overflows, request no delta
1800                         if (cls.netcon->outgoing_unreliable_sequence - cl.qw_validsequence >= QW_UPDATE_BACKUP-1)
1801                                 cl.qw_validsequence = 0;
1802                         // request delta compression if appropriate
1803                         if (cl.qw_validsequence && !cl_nodelta.integer && cls.state == ca_connected && !cls.demorecording)
1804                         {
1805                                 cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = cl.qw_validsequence;
1806                                 MSG_WriteByte(&buf, qw_clc_delta);
1807                                 MSG_WriteByte(&buf, cl.qw_validsequence & 255);
1808                         }
1809                         else
1810                                 cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = -1;
1811                         break;
1812                 case PROTOCOL_QUAKE:
1813                 case PROTOCOL_QUAKEDP:
1814                 case PROTOCOL_NEHAHRAMOVIE:
1815                 case PROTOCOL_NEHAHRABJP:
1816                 case PROTOCOL_NEHAHRABJP2:
1817                 case PROTOCOL_NEHAHRABJP3:
1818                         // 5 bytes
1819                         MSG_WriteByte (&buf, clc_move);
1820                         MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
1821                         // 3 bytes
1822                         for (i = 0;i < 3;i++)
1823                                 MSG_WriteAngle8i (&buf, cl.cmd.viewangles[i]);
1824                         // 6 bytes
1825                         MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
1826                         MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
1827                         MSG_WriteCoord16i (&buf, cl.cmd.upmove);
1828                         // 2 bytes
1829                         MSG_WriteByte (&buf, cl.cmd.buttons);
1830                         MSG_WriteByte (&buf, cl.cmd.impulse);
1831                         break;
1832                 case PROTOCOL_DARKPLACES2:
1833                 case PROTOCOL_DARKPLACES3:
1834                         // 5 bytes
1835                         MSG_WriteByte (&buf, clc_move);
1836                         MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
1837                         // 12 bytes
1838                         for (i = 0;i < 3;i++)
1839                                 MSG_WriteAngle32f (&buf, cl.cmd.viewangles[i]);
1840                         // 6 bytes
1841                         MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
1842                         MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
1843                         MSG_WriteCoord16i (&buf, cl.cmd.upmove);
1844                         // 2 bytes
1845                         MSG_WriteByte (&buf, cl.cmd.buttons);
1846                         MSG_WriteByte (&buf, cl.cmd.impulse);
1847                         break;
1848                 case PROTOCOL_DARKPLACES1:
1849                 case PROTOCOL_DARKPLACES4:
1850                 case PROTOCOL_DARKPLACES5:
1851                         // 5 bytes
1852                         MSG_WriteByte (&buf, clc_move);
1853                         MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
1854                         // 6 bytes
1855                         for (i = 0;i < 3;i++)
1856                                 MSG_WriteAngle16i (&buf, cl.cmd.viewangles[i]);
1857                         // 6 bytes
1858                         MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
1859                         MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
1860                         MSG_WriteCoord16i (&buf, cl.cmd.upmove);
1861                         // 2 bytes
1862                         MSG_WriteByte (&buf, cl.cmd.buttons);
1863                         MSG_WriteByte (&buf, cl.cmd.impulse);
1864                 case PROTOCOL_DARKPLACES6:
1865                 case PROTOCOL_DARKPLACES7:
1866                         // set the maxusercmds variable to limit how many should be sent
1867                         maxusercmds = bound(1, cl_netrepeatinput.integer + 1, min(3, CL_MAX_USERCMDS));
1868                         // when movement prediction is off, there's not much point in repeating old input as it will just be ignored
1869                         if (!cl.cmd.predicted)
1870                                 maxusercmds = 1;
1871
1872                         // send the latest moves in order, the old ones will be
1873                         // ignored by the server harmlessly, however if the previous
1874                         // packets were lost these moves will be used
1875                         //
1876                         // this reduces packet loss impact on gameplay.
1877                         for (j = 0, cmd = &cl.movecmd[maxusercmds-1];j < maxusercmds;j++, cmd--)
1878                         {
1879                                 // don't repeat any stale moves
1880                                 if (cmd->sequence && cmd->sequence < cls.servermovesequence)
1881                                         continue;
1882                                 // 5/9 bytes
1883                                 MSG_WriteByte (&buf, clc_move);
1884                                 if (cls.protocol != PROTOCOL_DARKPLACES6)
1885                                         MSG_WriteLong (&buf, cmd->predicted ? cmd->sequence : 0);
1886                                 MSG_WriteFloat (&buf, cmd->time); // last server packet time
1887                                 // 6 bytes
1888                                 for (i = 0;i < 3;i++)
1889                                         MSG_WriteAngle16i (&buf, cmd->viewangles[i]);
1890                                 // 6 bytes
1891                                 MSG_WriteCoord16i (&buf, cmd->forwardmove);
1892                                 MSG_WriteCoord16i (&buf, cmd->sidemove);
1893                                 MSG_WriteCoord16i (&buf, cmd->upmove);
1894                                 // 5 bytes
1895                                 MSG_WriteLong (&buf, cmd->buttons);
1896                                 MSG_WriteByte (&buf, cmd->impulse);
1897                                 // PRYDON_CLIENTCURSOR
1898                                 // 30 bytes
1899                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[0] * 32767.0f));
1900                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[1] * 32767.0f));
1901                                 MSG_WriteFloat (&buf, cmd->cursor_start[0]);
1902                                 MSG_WriteFloat (&buf, cmd->cursor_start[1]);
1903                                 MSG_WriteFloat (&buf, cmd->cursor_start[2]);
1904                                 MSG_WriteFloat (&buf, cmd->cursor_impact[0]);
1905                                 MSG_WriteFloat (&buf, cmd->cursor_impact[1]);
1906                                 MSG_WriteFloat (&buf, cmd->cursor_impact[2]);
1907                                 MSG_WriteShort (&buf, cmd->cursor_entitynumber);
1908                         }
1909                         break;
1910                 case PROTOCOL_UNKNOWN:
1911                         break;
1912                 }
1913         }
1914
1915         if (cls.protocol != PROTOCOL_QUAKEWORLD && buf.cursize)
1916         {
1917                 // ack entity frame numbers received since the last input was sent
1918                 // (redundent to improve handling of client->server packet loss)
1919                 // if cl_netrepeatinput is 1 and client framerate matches server
1920                 // framerate, this is 10 bytes, if client framerate is lower this
1921                 // will be more...
1922                 int i, j;
1923                 int oldsequence = cl.cmd.sequence - bound(1, cl_netrepeatinput.integer + 1, 3);
1924                 if (oldsequence < 1)
1925                         oldsequence = 1;
1926                 for (i = 0;i < LATESTFRAMENUMS;i++)
1927                 {
1928                         j = (cl.latestframenumsposition + i) % LATESTFRAMENUMS;
1929                         if (cl.latestsendnums[j] >= oldsequence)
1930                         {
1931                                 if (developer_networkentities.integer >= 10)
1932                                         Con_Printf("send clc_ackframe %i\n", cl.latestframenums[j]);
1933                                 MSG_WriteByte(&buf, clc_ackframe);
1934                                 MSG_WriteLong(&buf, cl.latestframenums[j]);
1935                         }
1936                 }
1937         }
1938
1939         // PROTOCOL_DARKPLACES6 = 67 bytes per packet
1940         // PROTOCOL_DARKPLACES7 = 71 bytes per packet
1941
1942         // acknowledge any recently received data blocks
1943         for (i = 0;i < CL_MAX_DOWNLOADACKS && (cls.dp_downloadack[i].start || cls.dp_downloadack[i].size);i++)
1944         {
1945                 MSG_WriteByte(&buf, clc_ackdownloaddata);
1946                 MSG_WriteLong(&buf, cls.dp_downloadack[i].start);
1947                 MSG_WriteShort(&buf, cls.dp_downloadack[i].size);
1948                 cls.dp_downloadack[i].start = 0;
1949                 cls.dp_downloadack[i].size = 0;
1950         }
1951
1952         // send the reliable message (forwarded commands) if there is one
1953         if (buf.cursize || cls.netcon->message.cursize)
1954                 NetConn_SendUnreliableMessage(cls.netcon, &buf, cls.protocol, max(20*(buf.cursize+40), cl_rate.integer), false);
1955
1956         if (quemove)
1957         {
1958                 // update the cl.movecmd array which holds the most recent moves,
1959                 // because we now need a new slot for the next input
1960                 for (i = CL_MAX_USERCMDS - 1;i >= 1;i--)
1961                         cl.movecmd[i] = cl.movecmd[i-1];
1962                 cl.movecmd[0].msec = 0;
1963                 cl.movecmd[0].frametime = 0;
1964         }
1965
1966         // clear button 'click' states
1967         in_attack.state  &= ~2;
1968         in_jump.state    &= ~2;
1969         in_button3.state &= ~2;
1970         in_button4.state &= ~2;
1971         in_button5.state &= ~2;
1972         in_button6.state &= ~2;
1973         in_button7.state &= ~2;
1974         in_button8.state &= ~2;
1975         in_use.state     &= ~2;
1976         in_button9.state  &= ~2;
1977         in_button10.state &= ~2;
1978         in_button11.state &= ~2;
1979         in_button12.state &= ~2;
1980         in_button13.state &= ~2;
1981         in_button14.state &= ~2;
1982         in_button15.state &= ~2;
1983         in_button16.state &= ~2;
1984         // clear impulse
1985         in_impulse = 0;
1986
1987         if (cls.netcon->message.overflowed)
1988         {
1989                 Con_Print("CL_SendMove: lost server connection\n");
1990                 CL_Disconnect();
1991                 Host_ShutdownServer();
1992         }
1993 }
1994
1995 /*
1996 ============
1997 CL_InitInput
1998 ============
1999 */
2000 void CL_InitInput (void)
2001 {
2002         Cmd_AddCommand ("+moveup",IN_UpDown, "swim upward");
2003         Cmd_AddCommand ("-moveup",IN_UpUp, "stop swimming upward");
2004         Cmd_AddCommand ("+movedown",IN_DownDown, "swim downward");
2005         Cmd_AddCommand ("-movedown",IN_DownUp, "stop swimming downward");
2006         Cmd_AddCommand ("+left",IN_LeftDown, "turn left");
2007         Cmd_AddCommand ("-left",IN_LeftUp, "stop turning left");
2008         Cmd_AddCommand ("+right",IN_RightDown, "turn right");
2009         Cmd_AddCommand ("-right",IN_RightUp, "stop turning right");
2010         Cmd_AddCommand ("+forward",IN_ForwardDown, "move forward");
2011         Cmd_AddCommand ("-forward",IN_ForwardUp, "stop moving forward");
2012         Cmd_AddCommand ("+back",IN_BackDown, "move backward");
2013         Cmd_AddCommand ("-back",IN_BackUp, "stop moving backward");
2014         Cmd_AddCommand ("+lookup", IN_LookupDown, "look upward");
2015         Cmd_AddCommand ("-lookup", IN_LookupUp, "stop looking upward");
2016         Cmd_AddCommand ("+lookdown", IN_LookdownDown, "look downward");
2017         Cmd_AddCommand ("-lookdown", IN_LookdownUp, "stop looking downward");
2018         Cmd_AddCommand ("+strafe", IN_StrafeDown, "activate strafing mode (move instead of turn)");
2019         Cmd_AddCommand ("-strafe", IN_StrafeUp, "deactivate strafing mode");
2020         Cmd_AddCommand ("+moveleft", IN_MoveleftDown, "strafe left");
2021         Cmd_AddCommand ("-moveleft", IN_MoveleftUp, "stop strafing left");
2022         Cmd_AddCommand ("+moveright", IN_MoverightDown, "strafe right");
2023         Cmd_AddCommand ("-moveright", IN_MoverightUp, "stop strafing right");
2024         Cmd_AddCommand ("+speed", IN_SpeedDown, "activate run mode (faster movement and turning)");
2025         Cmd_AddCommand ("-speed", IN_SpeedUp, "deactivate run mode");
2026         Cmd_AddCommand ("+attack", IN_AttackDown, "begin firing");
2027         Cmd_AddCommand ("-attack", IN_AttackUp, "stop firing");
2028         Cmd_AddCommand ("+jump", IN_JumpDown, "jump");
2029         Cmd_AddCommand ("-jump", IN_JumpUp, "end jump (so you can jump again)");
2030         Cmd_AddCommand ("impulse", IN_Impulse, "send an impulse number to server (select weapon, use item, etc)");
2031         Cmd_AddCommand ("+klook", IN_KLookDown, "activate keyboard looking mode, do not recenter view");
2032         Cmd_AddCommand ("-klook", IN_KLookUp, "deactivate keyboard looking mode");
2033         Cmd_AddCommand ("+mlook", IN_MLookDown, "activate mouse looking mode, do not recenter view");
2034         Cmd_AddCommand ("-mlook", IN_MLookUp, "deactivate mouse looking mode");
2035
2036         // LordHavoc: added use button
2037         Cmd_AddCommand ("+use", IN_UseDown, "use something (may be used by some mods)");
2038         Cmd_AddCommand ("-use", IN_UseUp, "stop using something");
2039
2040         // LordHavoc: added 6 new buttons
2041         Cmd_AddCommand ("+button3", IN_Button3Down, "activate button3 (behavior depends on mod)");
2042         Cmd_AddCommand ("-button3", IN_Button3Up, "deactivate button3");
2043         Cmd_AddCommand ("+button4", IN_Button4Down, "activate button4 (behavior depends on mod)");
2044         Cmd_AddCommand ("-button4", IN_Button4Up, "deactivate button4");
2045         Cmd_AddCommand ("+button5", IN_Button5Down, "activate button5 (behavior depends on mod)");
2046         Cmd_AddCommand ("-button5", IN_Button5Up, "deactivate button5");
2047         Cmd_AddCommand ("+button6", IN_Button6Down, "activate button6 (behavior depends on mod)");
2048         Cmd_AddCommand ("-button6", IN_Button6Up, "deactivate button6");
2049         Cmd_AddCommand ("+button7", IN_Button7Down, "activate button7 (behavior depends on mod)");
2050         Cmd_AddCommand ("-button7", IN_Button7Up, "deactivate button7");
2051         Cmd_AddCommand ("+button8", IN_Button8Down, "activate button8 (behavior depends on mod)");
2052         Cmd_AddCommand ("-button8", IN_Button8Up, "deactivate button8");
2053         Cmd_AddCommand ("+button9", IN_Button9Down, "activate button9 (behavior depends on mod)");
2054         Cmd_AddCommand ("-button9", IN_Button9Up, "deactivate button9");
2055         Cmd_AddCommand ("+button10", IN_Button10Down, "activate button10 (behavior depends on mod)");
2056         Cmd_AddCommand ("-button10", IN_Button10Up, "deactivate button10");
2057         Cmd_AddCommand ("+button11", IN_Button11Down, "activate button11 (behavior depends on mod)");
2058         Cmd_AddCommand ("-button11", IN_Button11Up, "deactivate button11");
2059         Cmd_AddCommand ("+button12", IN_Button12Down, "activate button12 (behavior depends on mod)");
2060         Cmd_AddCommand ("-button12", IN_Button12Up, "deactivate button12");
2061         Cmd_AddCommand ("+button13", IN_Button13Down, "activate button13 (behavior depends on mod)");
2062         Cmd_AddCommand ("-button13", IN_Button13Up, "deactivate button13");
2063         Cmd_AddCommand ("+button14", IN_Button14Down, "activate button14 (behavior depends on mod)");
2064         Cmd_AddCommand ("-button14", IN_Button14Up, "deactivate button14");
2065         Cmd_AddCommand ("+button15", IN_Button15Down, "activate button15 (behavior depends on mod)");
2066         Cmd_AddCommand ("-button15", IN_Button15Up, "deactivate button15");
2067         Cmd_AddCommand ("+button16", IN_Button16Down, "activate button16 (behavior depends on mod)");
2068         Cmd_AddCommand ("-button16", IN_Button16Up, "deactivate button16");
2069
2070         // LordHavoc: added bestweapon command
2071         Cmd_AddCommand ("bestweapon", IN_BestWeapon, "send an impulse number to server to select the first usable weapon out of several (example: 8 7 6 5 4 3 2 1)");
2072 #if 0
2073         Cmd_AddCommand ("cycleweapon", IN_CycleWeapon, "send an impulse number to server to select the next usable weapon out of several (example: 9 4 8) if you are holding one of these, and choose the first one if you are holding none of these");
2074 #endif
2075         Cmd_AddCommand ("register_bestweapon", IN_BestWeapon_Register_f, "(for QC usage only) change weapon parameters to be used by bestweapon; stuffcmd this in ClientConnect");
2076
2077         Cvar_RegisterVariable(&cl_movecliptokeyboard);
2078         Cvar_RegisterVariable(&cl_movement);
2079         Cvar_RegisterVariable(&cl_movement_nettimeout);
2080         Cvar_RegisterVariable(&cl_movement_minping);
2081         Cvar_RegisterVariable(&cl_movement_track_canjump);
2082         Cvar_RegisterVariable(&cl_movement_maxspeed);
2083         Cvar_RegisterVariable(&cl_movement_maxairspeed);
2084         Cvar_RegisterVariable(&cl_movement_stopspeed);
2085         Cvar_RegisterVariable(&cl_movement_friction);
2086         Cvar_RegisterVariable(&cl_movement_wallfriction);
2087         Cvar_RegisterVariable(&cl_movement_waterfriction);
2088         Cvar_RegisterVariable(&cl_movement_edgefriction);
2089         Cvar_RegisterVariable(&cl_movement_stepheight);
2090         Cvar_RegisterVariable(&cl_movement_accelerate);
2091         Cvar_RegisterVariable(&cl_movement_airaccelerate);
2092         Cvar_RegisterVariable(&cl_movement_wateraccelerate);
2093         Cvar_RegisterVariable(&cl_movement_jumpvelocity);
2094         Cvar_RegisterVariable(&cl_movement_airaccel_qw);
2095         Cvar_RegisterVariable(&cl_movement_airaccel_sideways_friction);
2096
2097         Cvar_RegisterVariable(&in_pitch_min);
2098         Cvar_RegisterVariable(&in_pitch_max);
2099         Cvar_RegisterVariable(&m_filter);
2100         Cvar_RegisterVariable(&m_accelerate);
2101         Cvar_RegisterVariable(&m_accelerate_minspeed);
2102         Cvar_RegisterVariable(&m_accelerate_maxspeed);
2103         Cvar_RegisterVariable(&m_accelerate_filter);
2104
2105         Cvar_RegisterVariable(&cl_netfps);
2106         Cvar_RegisterVariable(&cl_netrepeatinput);
2107         Cvar_RegisterVariable(&cl_netimmediatebuttons);
2108
2109         Cvar_RegisterVariable(&cl_nodelta);
2110 }
2111