// used only for light filters (cubemaps)
rtexturepool_t *r_shadow_filters_texturepool;
-cvar_t r_shadow_bumpscale_basetexture = {0, "r_shadow_bumpscale_basetexture", "0", "generate fake bumpmaps from diffuse textures at this bumpyness, try 4 to match tenebrae, higher values increase depth, requires r_restart to take effect"};
-cvar_t r_shadow_bumpscale_bumpmap = {0, "r_shadow_bumpscale_bumpmap", "4", "what magnitude to interpret _bump.tga textures as, higher values increase depth, requires r_restart to take effect"};
-cvar_t r_shadow_debuglight = {0, "r_shadow_debuglight", "-1", "renders only one light, for level design purposes or debugging"};
-cvar_t r_shadow_deferred = {CVAR_SAVE, "r_shadow_deferred", "0", "uses image-based lighting instead of geometry-based lighting, the method used renders a depth image and a normalmap image, renders lights into separate diffuse and specular images, and then combines this into the normal rendering, requires r_shadow_shadowmapping"};
-cvar_t r_shadow_usebihculling = {0, "r_shadow_usebihculling", "1", "use BIH (Bounding Interval Hierarchy) for culling lit surfaces instead of BSP (Binary Space Partitioning)"};
-cvar_t r_shadow_usenormalmap = {CVAR_SAVE, "r_shadow_usenormalmap", "1", "enables use of directional shading on lights"};
-cvar_t r_shadow_gloss = {CVAR_SAVE, "r_shadow_gloss", "1", "0 disables gloss (specularity) rendering, 1 uses gloss if textures are found, 2 forces a flat metallic specular effect on everything without textures (similar to tenebrae)"};
-cvar_t r_shadow_gloss2intensity = {0, "r_shadow_gloss2intensity", "0.125", "how bright the forced flat gloss should look if r_shadow_gloss is 2"};
-cvar_t r_shadow_glossintensity = {0, "r_shadow_glossintensity", "1", "how bright textured glossmaps should look if r_shadow_gloss is 1 or 2"};
-cvar_t r_shadow_glossexponent = {0, "r_shadow_glossexponent", "32", "how 'sharp' the gloss should appear (specular power)"};
-cvar_t r_shadow_gloss2exponent = {0, "r_shadow_gloss2exponent", "32", "same as r_shadow_glossexponent but for forced gloss (gloss 2) surfaces"};
-cvar_t r_shadow_glossexact = {0, "r_shadow_glossexact", "0", "use exact reflection math for gloss (slightly slower, but should look a tad better)"};
-cvar_t r_shadow_lightattenuationdividebias = {0, "r_shadow_lightattenuationdividebias", "1", "changes attenuation texture generation"};
-cvar_t r_shadow_lightattenuationlinearscale = {0, "r_shadow_lightattenuationlinearscale", "2", "changes attenuation texture generation"};
-cvar_t r_shadow_lightintensityscale = {0, "r_shadow_lightintensityscale", "1", "renders all world lights brighter or darker"};
-cvar_t r_shadow_lightradiusscale = {0, "r_shadow_lightradiusscale", "1", "renders all world lights larger or smaller"};
-cvar_t r_shadow_projectdistance = {0, "r_shadow_projectdistance", "0", "how far to cast shadows"};
-cvar_t r_shadow_frontsidecasting = {0, "r_shadow_frontsidecasting", "1", "whether to cast shadows from illuminated triangles (front side of model) or unlit triangles (back side of model)"};
-cvar_t r_shadow_realtime_dlight = {CVAR_SAVE, "r_shadow_realtime_dlight", "1", "enables rendering of dynamic lights such as explosions and rocket light"};
-cvar_t r_shadow_realtime_dlight_shadows = {CVAR_SAVE, "r_shadow_realtime_dlight_shadows", "1", "enables rendering of shadows from dynamic lights"};
-cvar_t r_shadow_realtime_dlight_svbspculling = {0, "r_shadow_realtime_dlight_svbspculling", "0", "enables svbsp optimization on dynamic lights (very slow!)"};
-cvar_t r_shadow_realtime_dlight_portalculling = {0, "r_shadow_realtime_dlight_portalculling", "0", "enables portal optimization on dynamic lights (slow!)"};
-cvar_t r_shadow_realtime_world = {CVAR_SAVE, "r_shadow_realtime_world", "0", "enables rendering of full world lighting (whether loaded from the map, or a .rtlights file, or a .ent file, or a .lights file produced by hlight)"};
-cvar_t r_shadow_realtime_world_importlightentitiesfrommap = {0, "r_shadow_realtime_world_importlightentitiesfrommap", "1", "load lights from .ent file or map entities at startup if no .rtlights or .lights file is present (if set to 2, always use the .ent or map entities)"};
-cvar_t r_shadow_realtime_world_lightmaps = {CVAR_SAVE, "r_shadow_realtime_world_lightmaps", "0", "brightness to render lightmaps when using full world lighting, try 0.5 for a tenebrae-like appearance"};
-cvar_t r_shadow_realtime_world_shadows = {CVAR_SAVE, "r_shadow_realtime_world_shadows", "1", "enables rendering of shadows from world lights"};
-cvar_t r_shadow_realtime_world_compile = {0, "r_shadow_realtime_world_compile", "1", "enables compilation of world lights for higher performance rendering"};
-cvar_t r_shadow_realtime_world_compileshadow = {0, "r_shadow_realtime_world_compileshadow", "1", "enables compilation of shadows from world lights for higher performance rendering"};
-cvar_t r_shadow_realtime_world_compilesvbsp = {0, "r_shadow_realtime_world_compilesvbsp", "1", "enables svbsp optimization during compilation (slower than compileportalculling but more exact)"};
-cvar_t r_shadow_realtime_world_compileportalculling = {0, "r_shadow_realtime_world_compileportalculling", "1", "enables portal-based culling optimization during compilation (overrides compilesvbsp)"};
-cvar_t r_shadow_scissor = {0, "r_shadow_scissor", "1", "use scissor optimization of light rendering (restricts rendering to the portion of the screen affected by the light)"};
-cvar_t r_shadow_shadowmapping = {CVAR_SAVE, "r_shadow_shadowmapping", "1", "enables use of shadowmapping (shadow rendering by depth texture sampling)"};
-cvar_t r_shadow_shadowmapping_filterquality = {CVAR_SAVE, "r_shadow_shadowmapping_filterquality", "-1", "shadowmap filter modes: -1 = auto-select, 0 = no filtering, 1 = bilinear, 2 = bilinear 2x2 blur (fast), 3 = 3x3 blur (moderate), 4 = 4x4 blur (slow)"};
-cvar_t r_shadow_shadowmapping_useshadowsampler = {CVAR_SAVE, "r_shadow_shadowmapping_useshadowsampler", "1", "whether to use sampler2DShadow if available"};
-cvar_t r_shadow_shadowmapping_depthbits = {CVAR_SAVE, "r_shadow_shadowmapping_depthbits", "24", "requested minimum shadowmap texture depth bits"};
-cvar_t r_shadow_shadowmapping_vsdct = {CVAR_SAVE, "r_shadow_shadowmapping_vsdct", "1", "enables use of virtual shadow depth cube texture"};
-cvar_t r_shadow_shadowmapping_minsize = {CVAR_SAVE, "r_shadow_shadowmapping_minsize", "32", "limit of shadowmap side size - must be at least r_shadow_shadowmapping_bordersize+2"};
-cvar_t r_shadow_shadowmapping_maxsize = {CVAR_SAVE, "r_shadow_shadowmapping_maxsize", "512", "limit of shadowmap side size - can not be more than 1/8th of atlassize because lights store 6 sides (2x3 grid) and sometimes 12 sides (4x3 grid for shadows from EF_NOSELFSHADOW entities) and there are multiple lights..."};
-cvar_t r_shadow_shadowmapping_texturesize = { CVAR_SAVE, "r_shadow_shadowmapping_texturesize", "8192", "size of shadowmap atlas texture - all shadowmaps are packed into this texture at frame start"};
-cvar_t r_shadow_shadowmapping_precision = {CVAR_SAVE, "r_shadow_shadowmapping_precision", "1", "makes shadowmaps have a maximum resolution of this number of pixels per light source radius unit such that, for example, at precision 0.5 a light with radius 200 will have a maximum resolution of 100 pixels"};
-//cvar_t r_shadow_shadowmapping_lod_bias = {CVAR_SAVE, "r_shadow_shadowmapping_lod_bias", "16", "shadowmap size bias"};
-//cvar_t r_shadow_shadowmapping_lod_scale = {CVAR_SAVE, "r_shadow_shadowmapping_lod_scale", "128", "shadowmap size scaling parameter"};
-cvar_t r_shadow_shadowmapping_bordersize = {CVAR_SAVE, "r_shadow_shadowmapping_bordersize", "5", "shadowmap size bias for filtering"};
-cvar_t r_shadow_shadowmapping_nearclip = {CVAR_SAVE, "r_shadow_shadowmapping_nearclip", "1", "shadowmap nearclip in world units"};
-cvar_t r_shadow_shadowmapping_bias = {CVAR_SAVE, "r_shadow_shadowmapping_bias", "0.03", "shadowmap bias parameter (this is multiplied by nearclip * 1024 / lodsize)"};
-cvar_t r_shadow_shadowmapping_polygonfactor = {CVAR_SAVE, "r_shadow_shadowmapping_polygonfactor", "2", "slope-dependent shadowmapping bias"};
-cvar_t r_shadow_shadowmapping_polygonoffset = {CVAR_SAVE, "r_shadow_shadowmapping_polygonoffset", "0", "constant shadowmapping bias"};
-cvar_t r_shadow_sortsurfaces = {0, "r_shadow_sortsurfaces", "1", "improve performance by sorting illuminated surfaces by texture"};
-cvar_t r_shadow_culllights_pvs = {CVAR_SAVE, "r_shadow_culllights_pvs", "1", "check if light overlaps any visible bsp leafs when determining if the light is visible"};
-cvar_t r_shadow_culllights_trace = {CVAR_SAVE, "r_shadow_culllights_trace", "1", "use raytraces from the eye to random places within light bounds to determine if the light is visible"};
-cvar_t r_shadow_culllights_trace_eyejitter = {CVAR_SAVE, "r_shadow_culllights_trace_eyejitter", "16", "offset eye location randomly by this much"};
-cvar_t r_shadow_culllights_trace_enlarge = {CVAR_SAVE, "r_shadow_culllights_trace_enlarge", "0", "make light bounds bigger by *(1.0+enlarge)"};
-cvar_t r_shadow_culllights_trace_expand = {CVAR_SAVE, "r_shadow_culllights_trace_expand", "8", "make light bounds bigger by this many units"};
-cvar_t r_shadow_culllights_trace_pad = {CVAR_SAVE, "r_shadow_culllights_trace_pad", "8", "accept traces that hit within this many units of the light bounds"};
-cvar_t r_shadow_culllights_trace_samples = {CVAR_SAVE, "r_shadow_culllights_trace_samples", "16", "use this many traces to random positions (in addition to center trace)"};
-cvar_t r_shadow_culllights_trace_tempsamples = {CVAR_SAVE, "r_shadow_culllights_trace_tempsamples", "16", "use this many traces if the light was created by csqc (no inter-frame caching), -1 disables the check (to avoid flicker entirely)"};
-cvar_t r_shadow_culllights_trace_delay = {CVAR_SAVE, "r_shadow_culllights_trace_delay", "1", "light will be considered visible for this many seconds after any trace connects"};
-cvar_t r_shadow_bouncegrid = {CVAR_SAVE, "r_shadow_bouncegrid", "0", "perform particle tracing for indirect lighting (Global Illumination / radiosity) using a 3D texture covering the scene, only active on levels with realtime lights active (r_shadow_realtime_world is usually required for these)"};
-cvar_t r_shadow_bouncegrid_blur = {CVAR_SAVE, "r_shadow_bouncegrid_blur", "0", "apply a 1-radius blur on bouncegrid to denoise it and deal with boundary issues with surfaces"};
-cvar_t r_shadow_bouncegrid_dynamic_bounceminimumintensity = { CVAR_SAVE, "r_shadow_bouncegrid_dynamic_bounceminimumintensity", "0.05", "stop bouncing once intensity drops below this fraction of the original particle color" };
-cvar_t r_shadow_bouncegrid_dynamic_culllightpaths = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_culllightpaths", "0", "skip accumulating light in the bouncegrid texture where the light paths are out of view (dynamic mode only)"};
-cvar_t r_shadow_bouncegrid_dynamic_directionalshading = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_directionalshading", "1", "use diffuse shading rather than ambient, 3D texture becomes 8x as many pixels to hold the additional data"};
-cvar_t r_shadow_bouncegrid_dynamic_dlightparticlemultiplier = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_dlightparticlemultiplier", "1", "if set to a high value like 16 this can make dlights look great, but 0 is recommended for performance reasons"};
-cvar_t r_shadow_bouncegrid_dynamic_hitmodels = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_hitmodels", "0", "enables hitting character model geometry (SLOW)"};
-cvar_t r_shadow_bouncegrid_dynamic_lightradiusscale = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_lightradiusscale", "5", "particles stop at this fraction of light radius (can be more than 1)"};
-cvar_t r_shadow_bouncegrid_dynamic_maxbounce = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_maxbounce", "5", "maximum number of bounces for a particle (minimum is 0)"};
-cvar_t r_shadow_bouncegrid_dynamic_maxphotons = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_maxphotons", "25000", "upper bound on photons to shoot per update, divided proportionately between lights - normally the number of photons is calculated by energyperphoton"};
-cvar_t r_shadow_bouncegrid_dynamic_quality = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_quality", "1", "amount of photons that should be fired (this is multiplied by spacing ^ 2 to make it adaptive with spacing changes)"};
-cvar_t r_shadow_bouncegrid_dynamic_spacing = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_spacing", "64", "unit size of bouncegrid pixel"};
-cvar_t r_shadow_bouncegrid_dynamic_updateinterval = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_updateinterval", "0", "update bouncegrid texture once per this many seconds, useful values are 0, 0.05, or 1000000"};
-cvar_t r_shadow_bouncegrid_dynamic_x = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_x", "64", "maximum texture size of bouncegrid on X axis"};
-cvar_t r_shadow_bouncegrid_dynamic_y = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_y", "64", "maximum texture size of bouncegrid on Y axis"};
-cvar_t r_shadow_bouncegrid_dynamic_z = {CVAR_SAVE, "r_shadow_bouncegrid_dynamic_z", "32", "maximum texture size of bouncegrid on Z axis"};
-cvar_t r_shadow_bouncegrid_floatcolors = {CVAR_SAVE, "r_shadow_bouncegrid_floatcolors", "1", "upload texture as RGBA16F (or RGBA32F when set to 2) rather than RGBA8 format - this gives more dynamic range and accuracy"};
-cvar_t r_shadow_bouncegrid_includedirectlighting = {CVAR_SAVE, "r_shadow_bouncegrid_includedirectlighting", "0", "allows direct lighting to be recorded, not just indirect (gives an effect somewhat like r_shadow_realtime_world_lightmaps)"};
-cvar_t r_shadow_bouncegrid_intensity = {CVAR_SAVE, "r_shadow_bouncegrid_intensity", "4", "overall brightness of bouncegrid texture"};
-cvar_t r_shadow_bouncegrid_lightpathsize = {CVAR_SAVE, "r_shadow_bouncegrid_lightpathsize", "64", "radius (in game units) of the light path for accumulation of light in the bouncegrid texture"};
-cvar_t r_shadow_bouncegrid_normalizevectors = { CVAR_SAVE, "r_shadow_bouncegrid_normalizevectors", "1", "normalize random vectors (otherwise their length can vary, which dims the lighting further from the light)" };
-cvar_t r_shadow_bouncegrid_particlebounceintensity = {CVAR_SAVE, "r_shadow_bouncegrid_particlebounceintensity", "4", "amount of energy carried over after each bounce, this is a multiplier of texture color and the result is clamped to 1 or less, to prevent adding energy on each bounce"};
-cvar_t r_shadow_bouncegrid_particleintensity = {CVAR_SAVE, "r_shadow_bouncegrid_particleintensity", "1", "brightness of particles contributing to bouncegrid texture"};
-cvar_t r_shadow_bouncegrid_rng_seed = { CVAR_SAVE, "r_shadow_bouncegrid_rng_seed", "0", "0+ = use this number as RNG seed, -1 = use time instead for disco-like craziness in dynamic mode" };
-cvar_t r_shadow_bouncegrid_rng_type = { CVAR_SAVE, "r_shadow_bouncegrid_rng_type", "0", "0 = Lehmer 128bit RNG (slow but high quality), 1 = lhcheeserand 32bit RNG (quick)" };
-cvar_t r_shadow_bouncegrid_static = {CVAR_SAVE, "r_shadow_bouncegrid_static", "1", "use static radiosity solution (high quality) rather than dynamic (splotchy)"};
-cvar_t r_shadow_bouncegrid_static_bounceminimumintensity = { CVAR_SAVE, "r_shadow_bouncegrid_static_bounceminimumintensity", "0.01", "stop bouncing once intensity drops below this fraction of the original particle color" };
-cvar_t r_shadow_bouncegrid_static_directionalshading = {CVAR_SAVE, "r_shadow_bouncegrid_static_directionalshading", "1", "whether to use directionalshading when in static mode"};
-cvar_t r_shadow_bouncegrid_static_lightradiusscale = {CVAR_SAVE, "r_shadow_bouncegrid_static_lightradiusscale", "5", "particles stop at this fraction of light radius (can be more than 1) when in static mode"};
-cvar_t r_shadow_bouncegrid_static_maxbounce = {CVAR_SAVE, "r_shadow_bouncegrid_static_maxbounce", "5", "maximum number of bounces for a particle (minimum is 0) in static mode"};
-cvar_t r_shadow_bouncegrid_static_maxphotons = {CVAR_SAVE, "r_shadow_bouncegrid_static_maxphotons", "250000", "upper bound on photons in static mode"};
-cvar_t r_shadow_bouncegrid_static_quality = {CVAR_SAVE, "r_shadow_bouncegrid_static_quality", "16", "amount of photons that should be fired (this is multiplied by spacing ^ 2 to make it adaptive with spacing changes)"};
-cvar_t r_shadow_bouncegrid_static_spacing = {CVAR_SAVE, "r_shadow_bouncegrid_static_spacing", "64", "unit size of bouncegrid pixel when in static mode"};
-cvar_t r_shadow_bouncegrid_subsamples = {CVAR_SAVE, "r_shadow_bouncegrid_subsamples", "1", "when generating the texture, sample this many points along each dimension (multisampling uses more compute but not more memory bandwidth)"};
-cvar_t r_shadow_bouncegrid_threaded = {CVAR_SAVE, "r_shadow_bouncegrid_threaded", "1", "enables use of taskqueue_maxthreads to perform the traces and slice rendering of bouncegrid"};
-cvar_t r_coronas = {CVAR_SAVE, "r_coronas", "0", "brightness of corona flare effects around certain lights, 0 disables corona effects"};
-cvar_t r_coronas_occlusionsizescale = {CVAR_SAVE, "r_coronas_occlusionsizescale", "0.1", "size of light source for corona occlusion checksum the proportion of hidden pixels controls corona intensity"};
-cvar_t r_coronas_occlusionquery = {CVAR_SAVE, "r_coronas_occlusionquery", "0", "fades coronas according to visibility"};
-cvar_t gl_flashblend = {CVAR_SAVE, "gl_flashblend", "0", "render bright coronas for dynamic lights instead of actual lighting, fast but ugly"};
-cvar_t r_editlights = {0, "r_editlights", "0", "enables .rtlights file editing mode"};
-cvar_t r_editlights_cursordistance = {0, "r_editlights_cursordistance", "1024", "maximum distance of cursor from eye"};
-cvar_t r_editlights_cursorpushback = {0, "r_editlights_cursorpushback", "0", "how far to pull the cursor back toward the eye"};
-cvar_t r_editlights_cursorpushoff = {0, "r_editlights_cursorpushoff", "4", "how far to push the cursor off the impacted surface"};
-cvar_t r_editlights_cursorgrid = {0, "r_editlights_cursorgrid", "4", "snaps cursor to this grid size"};
-cvar_t r_editlights_quakelightsizescale = {CVAR_SAVE, "r_editlights_quakelightsizescale", "1", "changes size of light entities loaded from a map"};
-cvar_t r_editlights_drawproperties = {0, "r_editlights_drawproperties", "1", "draw properties of currently selected light"};
-cvar_t r_editlights_current_origin = {0, "r_editlights_current_origin", "0 0 0", "origin of selected light"};
-cvar_t r_editlights_current_angles = {0, "r_editlights_current_angles", "0 0 0", "angles of selected light"};
-cvar_t r_editlights_current_color = {0, "r_editlights_current_color", "1 1 1", "color of selected light"};
-cvar_t r_editlights_current_radius = {0, "r_editlights_current_radius", "0", "radius of selected light"};
-cvar_t r_editlights_current_corona = {0, "r_editlights_current_corona", "0", "corona intensity of selected light"};
-cvar_t r_editlights_current_coronasize = {0, "r_editlights_current_coronasize", "0", "corona size of selected light"};
-cvar_t r_editlights_current_style = {0, "r_editlights_current_style", "0", "style of selected light"};
-cvar_t r_editlights_current_shadows = {0, "r_editlights_current_shadows", "0", "shadows flag of selected light"};
-cvar_t r_editlights_current_cubemap = {0, "r_editlights_current_cubemap", "0", "cubemap of selected light"};
-cvar_t r_editlights_current_ambient = {0, "r_editlights_current_ambient", "0", "ambient intensity of selected light"};
-cvar_t r_editlights_current_diffuse = {0, "r_editlights_current_diffuse", "1", "diffuse intensity of selected light"};
-cvar_t r_editlights_current_specular = {0, "r_editlights_current_specular", "1", "specular intensity of selected light"};
-cvar_t r_editlights_current_normalmode = {0, "r_editlights_current_normalmode", "0", "normalmode flag of selected light"};
-cvar_t r_editlights_current_realtimemode = {0, "r_editlights_current_realtimemode", "0", "realtimemode flag of selected light"};
+cvar_t r_shadow_bumpscale_basetexture = {CVAR_CLIENT, "r_shadow_bumpscale_basetexture", "0", "generate fake bumpmaps from diffuse textures at this bumpyness, try 4 to match tenebrae, higher values increase depth, requires r_restart to take effect"};
+cvar_t r_shadow_bumpscale_bumpmap = {CVAR_CLIENT, "r_shadow_bumpscale_bumpmap", "4", "what magnitude to interpret _bump.tga textures as, higher values increase depth, requires r_restart to take effect"};
+cvar_t r_shadow_debuglight = {CVAR_CLIENT, "r_shadow_debuglight", "-1", "renders only one light, for level design purposes or debugging"};
+cvar_t r_shadow_deferred = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_deferred", "0", "uses image-based lighting instead of geometry-based lighting, the method used renders a depth image and a normalmap image, renders lights into separate diffuse and specular images, and then combines this into the normal rendering, requires r_shadow_shadowmapping"};
+cvar_t r_shadow_usebihculling = {CVAR_CLIENT, "r_shadow_usebihculling", "1", "use BIH (Bounding Interval Hierarchy) for culling lit surfaces instead of BSP (Binary Space Partitioning)"};
+cvar_t r_shadow_usenormalmap = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_usenormalmap", "1", "enables use of directional shading on lights"};
+cvar_t r_shadow_gloss = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_gloss", "1", "0 disables gloss (specularity) rendering, 1 uses gloss if textures are found, 2 forces a flat metallic specular effect on everything without textures (similar to tenebrae)"};
+cvar_t r_shadow_gloss2intensity = {CVAR_CLIENT, "r_shadow_gloss2intensity", "0.125", "how bright the forced flat gloss should look if r_shadow_gloss is 2"};
+cvar_t r_shadow_glossintensity = {CVAR_CLIENT, "r_shadow_glossintensity", "1", "how bright textured glossmaps should look if r_shadow_gloss is 1 or 2"};
+cvar_t r_shadow_glossexponent = {CVAR_CLIENT, "r_shadow_glossexponent", "32", "how 'sharp' the gloss should appear (specular power)"};
+cvar_t r_shadow_gloss2exponent = {CVAR_CLIENT, "r_shadow_gloss2exponent", "32", "same as r_shadow_glossexponent but for forced gloss (gloss 2) surfaces"};
+cvar_t r_shadow_glossexact = {CVAR_CLIENT, "r_shadow_glossexact", "0", "use exact reflection math for gloss (slightly slower, but should look a tad better)"};
+cvar_t r_shadow_lightattenuationdividebias = {CVAR_CLIENT, "r_shadow_lightattenuationdividebias", "1", "changes attenuation texture generation"};
+cvar_t r_shadow_lightattenuationlinearscale = {CVAR_CLIENT, "r_shadow_lightattenuationlinearscale", "2", "changes attenuation texture generation"};
+cvar_t r_shadow_lightintensityscale = {CVAR_CLIENT, "r_shadow_lightintensityscale", "1", "renders all world lights brighter or darker"};
+cvar_t r_shadow_lightradiusscale = {CVAR_CLIENT, "r_shadow_lightradiusscale", "1", "renders all world lights larger or smaller"};
+cvar_t r_shadow_projectdistance = {CVAR_CLIENT, "r_shadow_projectdistance", "0", "how far to cast shadows"};
+cvar_t r_shadow_frontsidecasting = {CVAR_CLIENT, "r_shadow_frontsidecasting", "1", "whether to cast shadows from illuminated triangles (front side of model) or unlit triangles (back side of model)"};
+cvar_t r_shadow_realtime_dlight = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_realtime_dlight", "1", "enables rendering of dynamic lights such as explosions and rocket light"};
+cvar_t r_shadow_realtime_dlight_shadows = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_realtime_dlight_shadows", "1", "enables rendering of shadows from dynamic lights"};
+cvar_t r_shadow_realtime_dlight_svbspculling = {CVAR_CLIENT, "r_shadow_realtime_dlight_svbspculling", "0", "enables svbsp optimization on dynamic lights (very slow!)"};
+cvar_t r_shadow_realtime_dlight_portalculling = {CVAR_CLIENT, "r_shadow_realtime_dlight_portalculling", "0", "enables portal optimization on dynamic lights (slow!)"};
+cvar_t r_shadow_realtime_world = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_realtime_world", "0", "enables rendering of full world lighting (whether loaded from the map, or a .rtlights file, or a .ent file, or a .lights file produced by hlight)"};
+cvar_t r_shadow_realtime_world_importlightentitiesfrommap = {CVAR_CLIENT, "r_shadow_realtime_world_importlightentitiesfrommap", "1", "load lights from .ent file or map entities at startup if no .rtlights or .lights file is present (if set to 2, always use the .ent or map entities)"};
+cvar_t r_shadow_realtime_world_lightmaps = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_realtime_world_lightmaps", "0", "brightness to render lightmaps when using full world lighting, try 0.5 for a tenebrae-like appearance"};
+cvar_t r_shadow_realtime_world_shadows = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_realtime_world_shadows", "1", "enables rendering of shadows from world lights"};
+cvar_t r_shadow_realtime_world_compile = {CVAR_CLIENT, "r_shadow_realtime_world_compile", "1", "enables compilation of world lights for higher performance rendering"};
+cvar_t r_shadow_realtime_world_compileshadow = {CVAR_CLIENT, "r_shadow_realtime_world_compileshadow", "1", "enables compilation of shadows from world lights for higher performance rendering"};
+cvar_t r_shadow_realtime_world_compilesvbsp = {CVAR_CLIENT, "r_shadow_realtime_world_compilesvbsp", "1", "enables svbsp optimization during compilation (slower than compileportalculling but more exact)"};
+cvar_t r_shadow_realtime_world_compileportalculling = {CVAR_CLIENT, "r_shadow_realtime_world_compileportalculling", "1", "enables portal-based culling optimization during compilation (overrides compilesvbsp)"};
+cvar_t r_shadow_scissor = {CVAR_CLIENT, "r_shadow_scissor", "1", "use scissor optimization of light rendering (restricts rendering to the portion of the screen affected by the light)"};
+cvar_t r_shadow_shadowmapping = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping", "1", "enables use of shadowmapping (shadow rendering by depth texture sampling)"};
+cvar_t r_shadow_shadowmapping_filterquality = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_filterquality", "-1", "shadowmap filter modes: -1 = auto-select, 0 = no filtering, 1 = bilinear, 2 = bilinear 2x2 blur (fast), 3 = 3x3 blur (moderate), 4 = 4x4 blur (slow)"};
+cvar_t r_shadow_shadowmapping_useshadowsampler = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_useshadowsampler", "1", "whether to use sampler2DShadow if available"};
+cvar_t r_shadow_shadowmapping_depthbits = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_depthbits", "24", "requested minimum shadowmap texture depth bits"};
+cvar_t r_shadow_shadowmapping_vsdct = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_vsdct", "1", "enables use of virtual shadow depth cube texture"};
+cvar_t r_shadow_shadowmapping_minsize = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_minsize", "32", "limit of shadowmap side size - must be at least r_shadow_shadowmapping_bordersize+2"};
+cvar_t r_shadow_shadowmapping_maxsize = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_maxsize", "512", "limit of shadowmap side size - can not be more than 1/8th of atlassize because lights store 6 sides (2x3 grid) and sometimes 12 sides (4x3 grid for shadows from EF_NOSELFSHADOW entities) and there are multiple lights..."};
+cvar_t r_shadow_shadowmapping_texturesize = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_texturesize", "8192", "size of shadowmap atlas texture - all shadowmaps are packed into this texture at frame start"};
+cvar_t r_shadow_shadowmapping_precision = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_precision", "1", "makes shadowmaps have a maximum resolution of this number of pixels per light source radius unit such that, for example, at precision 0.5 a light with radius 200 will have a maximum resolution of 100 pixels"};
+//cvar_t r_shadow_shadowmapping_lod_bias = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_lod_bias", "16", "shadowmap size bias"};
+//cvar_t r_shadow_shadowmapping_lod_scale = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_lod_scale", "128", "shadowmap size scaling parameter"};
+cvar_t r_shadow_shadowmapping_bordersize = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_bordersize", "5", "shadowmap size bias for filtering"};
+cvar_t r_shadow_shadowmapping_nearclip = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_nearclip", "1", "shadowmap nearclip in world units"};
+cvar_t r_shadow_shadowmapping_bias = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_bias", "0.03", "shadowmap bias parameter (this is multiplied by nearclip * 1024 / lodsize)"};
+cvar_t r_shadow_shadowmapping_polygonfactor = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_polygonfactor", "2", "slope-dependent shadowmapping bias"};
+cvar_t r_shadow_shadowmapping_polygonoffset = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_shadowmapping_polygonoffset", "0", "constant shadowmapping bias"};
+cvar_t r_shadow_sortsurfaces = {CVAR_CLIENT, "r_shadow_sortsurfaces", "1", "improve performance by sorting illuminated surfaces by texture"};
+cvar_t r_shadow_culllights_pvs = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_culllights_pvs", "1", "check if light overlaps any visible bsp leafs when determining if the light is visible"};
+cvar_t r_shadow_culllights_trace = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_culllights_trace", "1", "use raytraces from the eye to random places within light bounds to determine if the light is visible"};
+cvar_t r_shadow_culllights_trace_eyejitter = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_culllights_trace_eyejitter", "16", "offset eye location randomly by this much"};
+cvar_t r_shadow_culllights_trace_enlarge = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_culllights_trace_enlarge", "0", "make light bounds bigger by *(1.0+enlarge)"};
+cvar_t r_shadow_culllights_trace_expand = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_culllights_trace_expand", "8", "make light bounds bigger by this many units"};
+cvar_t r_shadow_culllights_trace_pad = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_culllights_trace_pad", "8", "accept traces that hit within this many units of the light bounds"};
+cvar_t r_shadow_culllights_trace_samples = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_culllights_trace_samples", "16", "use this many traces to random positions (in addition to center trace)"};
+cvar_t r_shadow_culllights_trace_tempsamples = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_culllights_trace_tempsamples", "16", "use this many traces if the light was created by csqc (no inter-frame caching), -1 disables the check (to avoid flicker entirely)"};
+cvar_t r_shadow_culllights_trace_delay = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_culllights_trace_delay", "1", "light will be considered visible for this many seconds after any trace connects"};
+cvar_t r_shadow_bouncegrid = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid", "0", "perform particle tracing for indirect lighting (Global Illumination / radiosity) using a 3D texture covering the scene, only active on levels with realtime lights active (r_shadow_realtime_world is usually required for these)"};
+cvar_t r_shadow_bouncegrid_blur = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_blur", "0", "apply a 1-radius blur on bouncegrid to denoise it and deal with boundary issues with surfaces"};
+cvar_t r_shadow_bouncegrid_dynamic_bounceminimumintensity = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_bounceminimumintensity", "0.05", "stop bouncing once intensity drops below this fraction of the original particle color"};
+cvar_t r_shadow_bouncegrid_dynamic_culllightpaths = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_culllightpaths", "0", "skip accumulating light in the bouncegrid texture where the light paths are out of view (dynamic mode only)"};
+cvar_t r_shadow_bouncegrid_dynamic_directionalshading = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_directionalshading", "1", "use diffuse shading rather than ambient, 3D texture becomes 8x as many pixels to hold the additional data"};
+cvar_t r_shadow_bouncegrid_dynamic_dlightparticlemultiplier = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_dlightparticlemultiplier", "1", "if set to a high value like 16 this can make dlights look great, but 0 is recommended for performance reasons"};
+cvar_t r_shadow_bouncegrid_dynamic_hitmodels = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_hitmodels", "0", "enables hitting character model geometry (SLOW)"};
+cvar_t r_shadow_bouncegrid_dynamic_lightradiusscale = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_lightradiusscale", "5", "particles stop at this fraction of light radius (can be more than 1)"};
+cvar_t r_shadow_bouncegrid_dynamic_maxbounce = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_maxbounce", "5", "maximum number of bounces for a particle (minimum is 0)"};
+cvar_t r_shadow_bouncegrid_dynamic_maxphotons = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_maxphotons", "25000", "upper bound on photons to shoot per update, divided proportionately between lights - normally the number of photons is calculated by energyperphoton"};
+cvar_t r_shadow_bouncegrid_dynamic_quality = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_quality", "1", "amount of photons that should be fired (this is multiplied by spacing ^ 2 to make it adaptive with spacing changes)"};
+cvar_t r_shadow_bouncegrid_dynamic_spacing = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_spacing", "64", "unit size of bouncegrid pixel"};
+cvar_t r_shadow_bouncegrid_dynamic_updateinterval = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_updateinterval", "0", "update bouncegrid texture once per this many seconds, useful values are 0, 0.05, or 1000000"};
+cvar_t r_shadow_bouncegrid_dynamic_x = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_x", "64", "maximum texture size of bouncegrid on X axis"};
+cvar_t r_shadow_bouncegrid_dynamic_y = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_y", "64", "maximum texture size of bouncegrid on Y axis"};
+cvar_t r_shadow_bouncegrid_dynamic_z = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_dynamic_z", "32", "maximum texture size of bouncegrid on Z axis"};
+cvar_t r_shadow_bouncegrid_floatcolors = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_floatcolors", "1", "upload texture as RGBA16F (or RGBA32F when set to 2) rather than RGBA8 format - this gives more dynamic range and accuracy"};
+cvar_t r_shadow_bouncegrid_includedirectlighting = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_includedirectlighting", "0", "allows direct lighting to be recorded, not just indirect (gives an effect somewhat like r_shadow_realtime_world_lightmaps)"};
+cvar_t r_shadow_bouncegrid_intensity = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_intensity", "4", "overall brightness of bouncegrid texture"};
+cvar_t r_shadow_bouncegrid_lightpathsize = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_lightpathsize", "64", "radius (in game units) of the light path for accumulation of light in the bouncegrid texture"};
+cvar_t r_shadow_bouncegrid_normalizevectors = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_normalizevectors", "1", "normalize random vectors (otherwise their length can vary, which dims the lighting further from the light)"};
+cvar_t r_shadow_bouncegrid_particlebounceintensity = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_particlebounceintensity", "4", "amount of energy carried over after each bounce, this is a multiplier of texture color and the result is clamped to 1 or less, to prevent adding energy on each bounce"};
+cvar_t r_shadow_bouncegrid_particleintensity = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_particleintensity", "1", "brightness of particles contributing to bouncegrid texture"};
+cvar_t r_shadow_bouncegrid_rng_seed = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_rng_seed", "0", "0+ = use this number as RNG seed, -1 = use time instead for disco-like craziness in dynamic mode"};
+cvar_t r_shadow_bouncegrid_rng_type = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_rng_type", "0", "0 = Lehmer 128bit RNG (slow but high quality), 1 = lhcheeserand 32bit RNG (quick)"};
+cvar_t r_shadow_bouncegrid_static = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_static", "1", "use static radiosity solution (high quality) rather than dynamic (splotchy)"};
+cvar_t r_shadow_bouncegrid_static_bounceminimumintensity = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_static_bounceminimumintensity", "0.01", "stop bouncing once intensity drops below this fraction of the original particle color"};
+cvar_t r_shadow_bouncegrid_static_directionalshading = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_static_directionalshading", "1", "whether to use directionalshading when in static mode"};
+cvar_t r_shadow_bouncegrid_static_lightradiusscale = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_static_lightradiusscale", "5", "particles stop at this fraction of light radius (can be more than 1) when in static mode"};
+cvar_t r_shadow_bouncegrid_static_maxbounce = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_static_maxbounce", "5", "maximum number of bounces for a particle (minimum is 0) in static mode"};
+cvar_t r_shadow_bouncegrid_static_maxphotons = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_static_maxphotons", "250000", "upper bound on photons in static mode"};
+cvar_t r_shadow_bouncegrid_static_quality = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_static_quality", "16", "amount of photons that should be fired (this is multiplied by spacing ^ 2 to make it adaptive with spacing changes)"};
+cvar_t r_shadow_bouncegrid_static_spacing = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_static_spacing", "64", "unit size of bouncegrid pixel when in static mode"};
+cvar_t r_shadow_bouncegrid_subsamples = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_subsamples", "1", "when generating the texture, sample this many points along each dimension (multisampling uses more compute but not more memory bandwidth)"};
+cvar_t r_shadow_bouncegrid_threaded = {CVAR_CLIENT | CVAR_SAVE, "r_shadow_bouncegrid_threaded", "1", "enables use of taskqueue_maxthreads to perform the traces and slice rendering of bouncegrid"};
+cvar_t r_coronas = {CVAR_CLIENT | CVAR_SAVE, "r_coronas", "0", "brightness of corona flare effects around certain lights, 0 disables corona effects"};
+cvar_t r_coronas_occlusionsizescale = {CVAR_CLIENT | CVAR_SAVE, "r_coronas_occlusionsizescale", "0.1", "size of light source for corona occlusion checksum the proportion of hidden pixels controls corona intensity"};
+cvar_t r_coronas_occlusionquery = {CVAR_CLIENT | CVAR_SAVE, "r_coronas_occlusionquery", "0", "fades coronas according to visibility"};
+cvar_t gl_flashblend = {CVAR_CLIENT | CVAR_SAVE, "gl_flashblend", "0", "render bright coronas for dynamic lights instead of actual lighting, fast but ugly"};
+cvar_t r_editlights = {CVAR_CLIENT, "r_editlights", "0", "enables .rtlights file editing mode"};
+cvar_t r_editlights_cursordistance = {CVAR_CLIENT, "r_editlights_cursordistance", "1024", "maximum distance of cursor from eye"};
+cvar_t r_editlights_cursorpushback = {CVAR_CLIENT, "r_editlights_cursorpushback", "0", "how far to pull the cursor back toward the eye"};
+cvar_t r_editlights_cursorpushoff = {CVAR_CLIENT, "r_editlights_cursorpushoff", "4", "how far to push the cursor off the impacted surface"};
+cvar_t r_editlights_cursorgrid = {CVAR_CLIENT, "r_editlights_cursorgrid", "4", "snaps cursor to this grid size"};
+cvar_t r_editlights_quakelightsizescale = {CVAR_CLIENT | CVAR_SAVE, "r_editlights_quakelightsizescale", "1", "changes size of light entities loaded from a map"};
+cvar_t r_editlights_drawproperties = {CVAR_CLIENT, "r_editlights_drawproperties", "1", "draw properties of currently selected light"};
+cvar_t r_editlights_current_origin = {CVAR_CLIENT, "r_editlights_current_origin", "0 0 0", "origin of selected light"};
+cvar_t r_editlights_current_angles = {CVAR_CLIENT, "r_editlights_current_angles", "0 0 0", "angles of selected light"};
+cvar_t r_editlights_current_color = {CVAR_CLIENT, "r_editlights_current_color", "1 1 1", "color of selected light"};
+cvar_t r_editlights_current_radius = {CVAR_CLIENT, "r_editlights_current_radius", "0", "radius of selected light"};
+cvar_t r_editlights_current_corona = {CVAR_CLIENT, "r_editlights_current_corona", "0", "corona intensity of selected light"};
+cvar_t r_editlights_current_coronasize = {CVAR_CLIENT, "r_editlights_current_coronasize", "0", "corona size of selected light"};
+cvar_t r_editlights_current_style = {CVAR_CLIENT, "r_editlights_current_style", "0", "style of selected light"};
+cvar_t r_editlights_current_shadows = {CVAR_CLIENT, "r_editlights_current_shadows", "0", "shadows flag of selected light"};
+cvar_t r_editlights_current_cubemap = {CVAR_CLIENT, "r_editlights_current_cubemap", "0", "cubemap of selected light"};
+cvar_t r_editlights_current_ambient = {CVAR_CLIENT, "r_editlights_current_ambient", "0", "ambient intensity of selected light"};
+cvar_t r_editlights_current_diffuse = {CVAR_CLIENT, "r_editlights_current_diffuse", "1", "diffuse intensity of selected light"};
+cvar_t r_editlights_current_specular = {CVAR_CLIENT, "r_editlights_current_specular", "1", "specular intensity of selected light"};
+cvar_t r_editlights_current_normalmode = {CVAR_CLIENT, "r_editlights_current_normalmode", "0", "normalmode flag of selected light"};
+cvar_t r_editlights_current_realtimemode = {CVAR_CLIENT, "r_editlights_current_realtimemode", "0", "realtimemode flag of selected light"};
r_shadow_bouncegrid_state_t r_shadow_bouncegrid_state;
float nearclip, farclip, bias;
r_viewport_t viewport;
int flipped;
- float clearcolor[4];
if (r_shadow_rendermode != R_SHADOW_RENDERMODE_SHADOWMAP2D)
{
r_refdef.view.cullface_front = flipped ? r_shadow_cullface_back : r_shadow_cullface_front;
r_refdef.view.cullface_back = flipped ? r_shadow_cullface_front : r_shadow_cullface_back;
- Vector4Set(clearcolor, 1,1,1,1);
if (r_shadow_shadowmap2ddepthbuffer)
GL_ColorMask(1,1,1,1);
else
settings->rng_type = r_shadow_bouncegrid_rng_type.integer;
settings->rng_seed = r_shadow_bouncegrid_rng_seed.integer;
settings->bounceminimumintensity2 = bounceminimumintensity * bounceminimumintensity;
- settings->bounceminimumintensity2 = bounceminimumintensity * bounceminimumintensity;
settings->normalizevectors = r_shadow_bouncegrid_normalizevectors.integer != 0;
settings->subsamples = bound(1, r_shadow_bouncegrid_subsamples.integer, 4);
randomseed_t randomseed;
vec3_t baseshotcolor;
- t->started = 1;
-
normalphotonscaling = 1.0f / max(0.0000001f, r_shadow_bouncegrid_state.settings.energyperphoton);
for (lightindex = 0;lightindex < range2;lightindex++)
{
static void R_Shadow_BounceGrid_Slice_Task(taskqueue_task_t *t)
{
- t->started = 1;
R_Shadow_BounceGrid_Slice((int)t->i[0]);
t->done = 1;
}
TaskQueue_Yield(t);
return;
}
- t->started = 1;
slices = r_shadow_bouncegrid_state.resolution[2] - 2;
for (i = 0; i < slices; i++)
TaskQueue_Setup(r_shadow_bouncegrid_state.slices_tasks + i, NULL, R_Shadow_BounceGrid_Slice_Task, i + 1, 0, NULL, NULL);
{
float *pixels[4];
unsigned int resolution[3];
- t->started = 1;
if (r_shadow_bouncegrid_state.settings.blur)
{
VectorCopy(r_shadow_bouncegrid_state.resolution, resolution);
void R_Shadow_BounceGrid_ClearTex_Task(taskqueue_task_t *t)
{
- t->started = 1;
memset(r_shadow_bouncegrid_state.highpixels, 0, r_shadow_bouncegrid_state.numpixels * sizeof(float[4]));
t->done = 1;
}
static void R_Shadow_BounceGrid_TracePhotons_ShotTask(taskqueue_task_t *t)
{
r_shadow_bouncegrid_photon_t *p = (r_shadow_bouncegrid_photon_t *)t->p[0];
- t->started = 1;
R_Shadow_BounceGrid_TracePhotons_Shot(p, r_shadow_bouncegrid_state.settings.maxbounce, p->start, p->end, p->color, p->bounceminimumintensity2, p->startrefractiveindex);
t->done = 1;
}
static void R_Shadow_BounceGrid_EnqueuePhotons_Task(taskqueue_task_t *t)
{
int i;
- t->started = 1;
for (i = 0; i < r_shadow_bouncegrid_state.numphotons; i++)
TaskQueue_Setup(r_shadow_bouncegrid_state.photons_tasks + i, NULL, R_Shadow_BounceGrid_TracePhotons_ShotTask, 0, 0, r_shadow_bouncegrid_state.photons + i, NULL);
TaskQueue_Setup(&r_shadow_bouncegrid_state.photons_done_task, NULL, TaskQueue_Task_CheckTasksDone, r_shadow_bouncegrid_state.numphotons, 0, r_shadow_bouncegrid_state.photons_tasks, NULL);
{
int i;
int numsurfaces;
- unsigned char *shadowtrispvs, *lighttrispvs, *surfacesides;
+ unsigned char *shadowtrispvs, *surfacesides;
int numlightentities;
int numlightentities_noselfshadow;
int numshadowentities;
shadowentities = rtlight->cached_shadowentities;
shadowentities_noselfshadow = rtlight->cached_shadowentities_noselfshadow;
shadowtrispvs = rtlight->cached_shadowtrispvs;
- lighttrispvs = rtlight->cached_lighttrispvs;
surfacelist = rtlight->cached_surfacelist;
// make this the active rtlight for rendering purposes
{
int i;
int numsurfaces;
- unsigned char *shadowtrispvs, *lighttrispvs;
+ unsigned char *lighttrispvs;
int numlightentities;
int numlightentities_noselfshadow;
- int numshadowentities;
- int numshadowentities_noselfshadow;
entity_render_t **lightentities;
entity_render_t **lightentities_noselfshadow;
entity_render_t **shadowentities;
numlightentities = rtlight->cached_numlightentities;
numlightentities_noselfshadow = rtlight->cached_numlightentities_noselfshadow;
- numshadowentities = rtlight->cached_numshadowentities;
- numshadowentities_noselfshadow = rtlight->cached_numshadowentities_noselfshadow;
numsurfaces = rtlight->cached_numsurfaces;
lightentities = rtlight->cached_lightentities;
lightentities_noselfshadow = rtlight->cached_lightentities_noselfshadow;
shadowentities = rtlight->cached_shadowentities;
shadowentities_noselfshadow = rtlight->cached_shadowentities_noselfshadow;
- shadowtrispvs = rtlight->cached_shadowtrispvs;
lighttrispvs = rtlight->cached_lighttrispvs;
surfacelist = rtlight->cached_surfacelist;
castshadows = rtlight->castshadows;
{
float borderbias;
int size;
- float shadowmapoffsetnoselfshadow = 0;
matrix4x4_t radiustolight = rtlight->matrix_worldtolight;
Matrix4x4_Abs(&radiustolight);
//Con_Printf("distance %f lodlinear %i size %i\n", distance, lodlinear, size);
- if (rtlight->cached_numshadowentities_noselfshadow)
- shadowmapoffsetnoselfshadow = rtlight->shadowmapatlassidesize * 2;
-
// render lighting using the depth texture as shadowmap
// draw lighting in the unmasked areas
if (numsurfaces + numlightentities)
projects / xonotic / darkplaces.git / blobdiff