//cvar_t r_subdivide_size = {CVAR_SAVE, "r_subdivide_size", "128", "how large water polygons should be (smaller values produce more polygons which give better warping effects)"};
-cvar_t halflifebsp = {0, "halflifebsp", "0", "indicates the current map is hlbsp format (useful to know because of different bounding box sizes)"};
cvar_t r_novis = {0, "r_novis", "0", "draws whole level, see also sv_cullentities_pvs 0"};
cvar_t r_picmipworld = {CVAR_SAVE, "r_picmipworld", "1", "whether gl_picmip shall apply to world textures too"};
cvar_t r_nosurftextures = {0, "r_nosurftextures", "0", "pretends there was no texture lump found in the q1bsp/hlbsp loading (useful for debugging this rare case)"};
void Mod_BrushInit(void)
{
// Cvar_RegisterVariable(&r_subdivide_size);
- Cvar_RegisterVariable(&halflifebsp);
Cvar_RegisterVariable(&r_novis);
Cvar_RegisterVariable(&r_picmipworld);
Cvar_RegisterVariable(&r_nosurftextures);
// LordHavoc: HL sky textures are entirely different than quake
if (!loadmodel->brush.ishlbsp && !strncmp(tx->name, "sky", 3) && mtwidth == 256 && mtheight == 128)
{
- if (loadmodel->isworldmodel)
+ data = loadimagepixelsbgra(tx->name, false, false);
+ if (data && image_width == 256 && image_height == 128)
{
- data = loadimagepixelsbgra(tx->name, false, false);
- if (data && image_width == 256 && image_height == 128)
- {
- R_Q1BSP_LoadSplitSky(data, image_width, image_height, 4);
- Mem_Free(data);
- }
- else if (mtdata != NULL)
- R_Q1BSP_LoadSplitSky(mtdata, mtwidth, mtheight, 1);
+ R_Q1BSP_LoadSplitSky(data, image_width, image_height, 4);
+ Mem_Free(data);
}
+ else if (mtdata != NULL)
+ R_Q1BSP_LoadSplitSky(mtdata, mtwidth, mtheight, 1);
}
else
{
if (i == -1)
{
surface->lightmapinfo->samples = NULL;
+#if 0
// give non-lightmapped water a 1x white lightmap
if (surface->texture->name[0] == '*' && (surface->lightmapinfo->texinfo->flags & TEX_SPECIAL) && ssize <= 256 && tsize <= 256)
{
surface->lightmapinfo->styles[0] = 0;
memset(surface->lightmapinfo->samples, 128, ssize * tsize * 3);
}
+#endif
}
else if (loadmodel->brush.ishlbsp) // LordHavoc: HalfLife map (bsp version 30)
surface->lightmapinfo->samples = loadmodel->brushq1.lightdata + i;
// now that we've decided the lightmap texture size, we can do the rest
if (cls.state != ca_dedicated)
{
+ int stainmapsize = 0;
struct alloc_lm_state allocState;
for (surfacenum = 0, surface = loadmodel->data_surfaces;surfacenum < count;surfacenum++, surface++)
int i, iu, iv, lightmapx = 0, lightmapy = 0;
float u, v, ubase, vbase, uscale, vscale;
+ if (!loadmodel->brushq1.lightmapupdateflags[surfacenum])
+ continue;
+
smax = surface->lightmapinfo->extents[0] >> 4;
tmax = surface->lightmapinfo->extents[1] >> 4;
ssize = (surface->lightmapinfo->extents[0] >> 4) + 1;
tsize = (surface->lightmapinfo->extents[1] >> 4) + 1;
+ stainmapsize += ssize * tsize * 3;
if (!lightmaptexture || !Mod_Q1BSP_AllocLightmapBlock(&allocState, lightmapsize, lightmapsize, ssize, tsize, &lightmapx, &lightmapy))
{
iv = (int) v;
(loadmodel->surfmesh.data_lightmapoffsets + surface->num_firstvertex)[i] = (bound(0, iv, tmax) * ssize + bound(0, iu, smax)) * 3;
}
-
}
if (cl_stainmaps.integer)
{
- // allocate stainmaps for permanent marks on walls
- int stainmapsize = 0;
+ // allocate stainmaps for permanent marks on walls and clear white
unsigned char *stainsamples = NULL;
- for (surfacenum = 0, surface = loadmodel->data_surfaces;surfacenum < count;surfacenum++, surface++)
- {
- ssize = (surface->lightmapinfo->extents[0] >> 4) + 1;
- tsize = (surface->lightmapinfo->extents[1] >> 4) + 1;
- stainmapsize += ssize * tsize * 3;
- }
- // allocate and clear to white
stainsamples = (unsigned char *)Mem_Alloc(loadmodel->mempool, stainmapsize);
memset(stainsamples, 255, stainmapsize);
// assign pointers
for (surfacenum = 0, surface = loadmodel->data_surfaces;surfacenum < count;surfacenum++, surface++)
{
+ if (!loadmodel->brushq1.lightmapupdateflags[surfacenum])
+ continue;
ssize = (surface->lightmapinfo->extents[0] >> 4) + 1;
tsize = (surface->lightmapinfo->extents[1] >> 4) + 1;
surface->lightmapinfo->stainsamples = stainsamples;
mod->brush.AmbientSoundLevelsForPoint = Mod_Q1BSP_AmbientSoundLevelsForPoint;
mod->brush.RoundUpToHullSize = Mod_Q1BSP_RoundUpToHullSize;
mod->brush.PointInLeaf = Mod_Q1BSP_PointInLeaf;
-
- if (loadmodel->isworldmodel)
- Cvar_SetValue("halflifebsp", mod->brush.ishlbsp);
+ mod->Draw = R_Q1BSP_Draw;
+ mod->DrawDepth = R_Q1BSP_DrawDepth;
+ mod->DrawDebug = R_Q1BSP_DrawDebug;
+ mod->GetLightInfo = R_Q1BSP_GetLightInfo;
+ mod->CompileShadowVolume = R_Q1BSP_CompileShadowVolume;
+ mod->DrawShadowVolume = R_Q1BSP_DrawShadowVolume;
+ mod->DrawLight = R_Q1BSP_DrawLight;
// load into heap
if (i > 0)
{
char name[10];
- // LordHavoc: only register submodels if it is the world
- // (prevents external bsp models from replacing world submodels with
- // their own)
- if (!loadmodel->isworldmodel)
- continue;
// duplicate the basic information
dpsnprintf(name, sizeof(name), "*%i", i);
- mod = Mod_FindName(name);
+ mod = Mod_FindName(name, loadmodel->name);
// copy the base model to this one
*mod = *loadmodel;
// rename the clone back to its proper name
strlcpy(mod->name, name, sizeof(mod->name));
+ mod->brush.parentmodel = loadmodel;
// textures and memory belong to the main model
mod->texturepool = NULL;
mod->mempool = NULL;
+ mod->brush.TraceLineOfSight = NULL;
+ mod->brush.GetPVS = NULL;
+ mod->brush.FatPVS = NULL;
+ mod->brush.BoxTouchingPVS = NULL;
+ mod->brush.BoxTouchingLeafPVS = NULL;
+ mod->brush.BoxTouchingVisibleLeafs = NULL;
+ mod->brush.FindBoxClusters = NULL;
+ mod->brush.LightPoint = NULL;
+ mod->brush.AmbientSoundLevelsForPoint = NULL;
}
mod->brush.submodel = i;
mod->nummodelsurfaces = bm->numfaces;
// make the model surface list (used by shadowing/lighting)
- mod->surfacelist = (int *)datapointer;datapointer += mod->nummodelsurfaces * sizeof(int);
- for (j = 0;j < mod->nummodelsurfaces;j++)
- mod->surfacelist[j] = mod->firstmodelsurface + j;
-
- // this gets altered below if sky or water is used
- mod->DrawSky = NULL;
- mod->DrawAddWaterPlanes = NULL;
- mod->Draw = R_Q1BSP_Draw;
- mod->DrawDepth = R_Q1BSP_DrawDepth;
- mod->DrawDebug = R_Q1BSP_DrawDebug;
- mod->GetLightInfo = R_Q1BSP_GetLightInfo;
- mod->CompileShadowVolume = R_Q1BSP_CompileShadowVolume;
- mod->DrawShadowVolume = R_Q1BSP_DrawShadowVolume;
- mod->DrawLight = R_Q1BSP_DrawLight;
- if (i != 0)
- {
- mod->brush.TraceLineOfSight = NULL;
- mod->brush.GetPVS = NULL;
- mod->brush.FatPVS = NULL;
- mod->brush.BoxTouchingPVS = NULL;
- mod->brush.BoxTouchingLeafPVS = NULL;
- mod->brush.BoxTouchingVisibleLeafs = NULL;
- mod->brush.FindBoxClusters = NULL;
- mod->brush.LightPoint = NULL;
- mod->brush.AmbientSoundLevelsForPoint = NULL;
- }
+ mod->sortedmodelsurfaces = (int *)datapointer;datapointer += mod->nummodelsurfaces * sizeof(int);
+ Mod_MakeSortedSurfaces(mod);
// copy the submodel bounds, then enlarge the yaw and rotated bounds according to radius
// (previously this code measured the radius of the vertices of surfaces in the submodel, but that broke submodels that contain only CLIP brushes, which do not produce surfaces)
mod->radius = modelradius;
mod->radius2 = modelradius * modelradius;
+ // this gets altered below if sky or water is used
+ mod->DrawSky = NULL;
+ mod->DrawAddWaterPlanes = NULL;
+
// scan surfaces for sky and water and flag the submodel as possessing these features or not
// build lightstyle lists for quick marking of dirty lightmaps when lightstyles flicker
if (mod->nummodelsurfaces)
{
for (j = 0, surface = &mod->data_surfaces[mod->firstmodelsurface];j < mod->nummodelsurfaces;j++, surface++)
- {
- // we only need to have a drawsky function if it is used(usually only on world model)
if (surface->texture->basematerialflags & MATERIALFLAG_SKY)
- mod->DrawSky = R_Q1BSP_DrawSky;
+ break;
+ if (j < mod->nummodelsurfaces)
+ mod->DrawSky = R_Q1BSP_DrawSky;
+
+ for (j = 0, surface = &mod->data_surfaces[mod->firstmodelsurface];j < mod->nummodelsurfaces;j++, surface++)
if (surface->texture->basematerialflags & (MATERIALFLAG_WATERSHADER | MATERIALFLAG_REFRACTION | MATERIALFLAG_REFLECTION))
- mod->DrawAddWaterPlanes = R_Q1BSP_DrawAddWaterPlanes;
- }
+ break;
+ if (j < mod->nummodelsurfaces)
+ mod->DrawAddWaterPlanes = R_Q1BSP_DrawAddWaterPlanes;
// build lightstyle update chains
// (used to rapidly mark lightmapupdateflags on many surfaces
i = LittleLong(header->version);
if (i != Q2BSPVERSION)
Host_Error("Mod_Q2BSP_Load: %s has wrong version number (%i, should be %i)", mod->name, i, Q2BSPVERSION);
- mod->brush.ishlbsp = false;
- if (loadmodel->isworldmodel)
- Cvar_SetValue("halflifebsp", mod->brush.ishlbsp);
mod_base = (unsigned char *)header;
if (l->filelen)
{
if (l->filelen < count * (int)sizeof(*in))
- Host_Error("Mod_Q3BSP_LoadLightGrid: invalid lightgrid lump size %i bytes, should be %i bytes (%ix%ix%i)", l->filelen, (int)(count * sizeof(*in)), loadmodel->brushq3.num_lightgrid_dimensions[0], loadmodel->brushq3.num_lightgrid_dimensions[1], loadmodel->brushq3.num_lightgrid_dimensions[2]);
+ Host_Error("Mod_Q3BSP_LoadLightGrid: invalid lightgrid lump size %i bytes, should be %i bytes (%ix%ix%i)", l->filelen, (int)(count * sizeof(*in)), loadmodel->brushq3.num_lightgrid_isize[0], loadmodel->brushq3.num_lightgrid_isize[1], loadmodel->brushq3.num_lightgrid_isize[2]);
if (l->filelen != count * (int)sizeof(*in))
Con_Printf("Mod_Q3BSP_LoadLightGrid: Warning: calculated lightgrid size %i bytes does not match lump size %i\n", (int)(count * sizeof(*in)), l->filelen);
out = (q3dlightgrid_t *)Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
i = LittleLong(header->version);
if (i != Q3BSPVERSION && i != Q3BSPVERSION_IG && i != Q3BSPVERSION_LIVE)
Host_Error("Mod_Q3BSP_Load: %s has wrong version number (%i, should be %i)", mod->name, i, Q3BSPVERSION);
- mod->brush.ishlbsp = false;
- if (loadmodel->isworldmodel)
- Cvar_SetValue("halflifebsp", mod->brush.ishlbsp);
mod->soundfromcenter = true;
mod->TraceBox = Mod_Q3BSP_TraceBox;
mod->brush.FindBoxClusters = Mod_Q1BSP_FindBoxClusters;
mod->brush.LightPoint = Mod_Q3BSP_LightPoint;
mod->brush.FindNonSolidLocation = Mod_Q1BSP_FindNonSolidLocation;
+ mod->brush.AmbientSoundLevelsForPoint = NULL;
+ mod->brush.RoundUpToHullSize = NULL;
mod->brush.PointInLeaf = Mod_Q1BSP_PointInLeaf;
mod->Draw = R_Q1BSP_Draw;
mod->DrawDepth = R_Q1BSP_DrawDepth;
mod->CompileShadowVolume = R_Q1BSP_CompileShadowVolume;
mod->DrawShadowVolume = R_Q1BSP_DrawShadowVolume;
mod->DrawLight = R_Q1BSP_DrawLight;
- mod->DrawAddWaterPlanes = NULL;
mod_base = (unsigned char *)header;
if (i > 0)
{
char name[10];
- // LordHavoc: only register submodels if it is the world
- // (prevents external bsp models from replacing world submodels with
- // their own)
- if (!loadmodel->isworldmodel)
- continue;
// duplicate the basic information
dpsnprintf(name, sizeof(name), "*%i", i);
- mod = Mod_FindName(name);
+ mod = Mod_FindName(name, loadmodel->name);
+ // copy the base model to this one
*mod = *loadmodel;
+ // rename the clone back to its proper name
strlcpy(mod->name, name, sizeof(mod->name));
+ mod->brush.parentmodel = loadmodel;
// textures and memory belong to the main model
mod->texturepool = NULL;
mod->mempool = NULL;
mod->brush.BoxTouchingVisibleLeafs = NULL;
mod->brush.FindBoxClusters = NULL;
mod->brush.LightPoint = NULL;
- mod->brush.FindNonSolidLocation = Mod_Q1BSP_FindNonSolidLocation;
+ mod->brush.AmbientSoundLevelsForPoint = NULL;
}
mod->brush.submodel = i;
mod->nummodelsurfaces = mod->brushq3.data_models[i].numfaces;
mod->firstmodelbrush = mod->brushq3.data_models[i].firstbrush;
mod->nummodelbrushes = mod->brushq3.data_models[i].numbrushes;
- mod->surfacelist = (int *)Mem_Alloc(loadmodel->mempool, mod->nummodelsurfaces * sizeof(*mod->surfacelist));
- for (j = 0;j < mod->nummodelsurfaces;j++)
- mod->surfacelist[j] = mod->firstmodelsurface + j;
+ mod->sortedmodelsurfaces = (int *)Mem_Alloc(loadmodel->mempool, mod->nummodelsurfaces * sizeof(*mod->sortedmodelsurfaces));
+ Mod_MakeSortedSurfaces(mod);
VectorCopy(mod->brushq3.data_models[i].mins, mod->normalmins);
VectorCopy(mod->brushq3.data_models[i].maxs, mod->normalmaxs);
mod->radius = modelradius;
mod->radius2 = modelradius * modelradius;
+ // this gets altered below if sky or water is used
+ mod->DrawSky = NULL;
+ mod->DrawAddWaterPlanes = NULL;
+
for (j = 0;j < mod->nummodelsurfaces;j++)
if (mod->data_surfaces[j + mod->firstmodelsurface].texture->basematerialflags & MATERIALFLAG_SKY)
break;
if (j < mod->nummodelsurfaces)
mod->DrawSky = R_Q1BSP_DrawSky;
- else
- mod->DrawSky = NULL;
for (j = 0;j < mod->nummodelsurfaces;j++)
if (mod->data_surfaces[j + mod->firstmodelsurface].texture->basematerialflags & (MATERIALFLAG_WATERSHADER | MATERIALFLAG_REFRACTION | MATERIALFLAG_REFLECTION))
break;
if (j < mod->nummodelsurfaces)
mod->DrawAddWaterPlanes = R_Q1BSP_DrawAddWaterPlanes;
- else
- mod->DrawAddWaterPlanes = NULL;
}
}