fix polygon distance checks (the radius comparison was completely wrong)

[xonotic/darkplaces.git] / darkplaces.txt

DarkPlaces engine 105 readme

Some of the changes to the game:

Sorted Edge Rasterizer system to reduce overdraw on the 3D card

Nehahra support (using -nehahra option)

Larger map size, more accurate movement and precise aiming (however Quake and HalfLife maps have an internal limitation of +-32768)

Optimized QuakeC interpreter

Bounds Checked QuakeC interpreter (optional, enabled by default, and still
faster than original quake - code can not harm your computer, well, except
using certain builtins in unintended ways perhaps)

Colored lighting

Optional lit particles (in color, of course)

External .lit colored lighting file support (intended for custom map authors,
who can now release classic quake compatible maps, with colored lighting in
DarkPlaces, QuakeForge newtree and other engines that support .lit)

HalfLife map support (place your HalfLife wads in quake/id1/textures/ or
quake/MODDIR/textures/ - HalfLife maps do not themselves contain textures...)

External texture support (.tga and .pcx supported, place a .tga or .pcx image
in id1/textures/ and it will override that texture in maps, also works with
HalfLife wads if they are listed in the "wad" key of worldspawn in the map)

Different dynamic light falloff (cooler)

Huge dynamic light speedup (no longer applicable, due to verted dlights)

Lightmap upload speedup

Selectable 24bit or 32bit lightmap format (gl_lightmaprgba 0/1) for
compatibility, 24bit (RGB) is recommended for quality

Redesigned particle effects (may make them obey physics later)

Smoke trails

Bubble trails underwater, currently only from rockets/grenades/explosions

Dynamically lit water

Rippling water surfaces (optional)

Fog (optional, map settable, emulated so it works on any card)

Interpolated model animations

Alpha blended sprites (disabled on Matrox G200, resulting in hard edges, and
fading does not work on ATI Rage Pro)

Blended sprite animations (disabled on ATI Rage Pro)

Interpolated monster movement and rotation (very smooth) on server (will
 move to client at some point, so demos will benefit)

Transparent particles (partially working on Matrox G200 - particles are not
blended at the edges (hard edge) but smoke fades, different behavior on
ATI Rage Pro - does not fade)

32bit color sprites supported (alpha disabled on Matrox G200, resulting in a
hard silohuette edge for G200 users - my only recommendation: upgrade)

24bit color model skins supported (same kind of change as the 32bit sprite
format, will be superseded by external replacement skin images)

TARGA and PCX textured skybox supported (map settable)

Stereo wav playback for music purposes

Non-directional playback of ATTN_NONE sounds for music purposes

Quake2 model support (anything but players, which are unskinned because they
do not contain a skin name list to load, I'm sort of considering adding
a "skin" console command and related network protocol stuff, which would also
support QW skins on the normal quake player model, although I'm not fond of
potential issues with loading models while the server is running, I also need
to support the weapon models...)

Lighting on sprites if desired (put ! anywhere in the sprite filename and it
will apply proper lighting, rather than making it fullbright)

Overbright lighting (optional, use lightmode 0 to get the old GLQuake style
lighting...  3DFX dithering looks nasty so 3DFX users might have to live
without overbright lighting)

Transparent polygon sorter (to draw polygons in the correct order)

Faster wall rendering (paving the way toward shaders and other stuff)

Fullbright support on walls (easy addition due to the new wall rendering)

Skybox blocks view just like quake sky polygons did

Brightness controls ("brightness" and "contrast" console variables)

Directional model lighting (only a 0.1% slowdown and looks great :)

Vertex array based model rendering (fast like Quake3)

No messy .ms2 model mesh files (no glquake dir anymore either)

64 player support

Completely rewritten dynamic lighting engine, using a hybrid lightmap and
vertex approach, and is fast on slow memory machines

Rewritten model loader (for the second time)

Multi-pass model rendering, supporting colormapping without uploads (shirt,
pants, glowing areas...)

New improved crosshair (team color coded)

Improved angle rounding (better aiming on existing quake servers, does not
support proquake precise aiming though)

Many other things I forgot to mention


New commandline options:
-sndspeed samplerate (default: 11025, note: quake's 22khz sounds are annoying)

Mods specially supported:
-hipnotic (already supported in quake)
-rogue (already supported in quake)
-nehahra (must run Nehahra with this option, otherwise it will have demo
          incompatibilities and other nonsense)

New console commands:

r_clipheight <60 or higher>
how tall the screen is as far as the Sorted Edge Rasterizer is concerned (default: 600 lines).

r_lerpimages <0 or 1>
whether or not to smooth textures (defaults to on).

loadsky <name>
loads a skybox, if the images can be found, searchs moddir/gfx/env and
moddir/env for them.
(a skybox named base is 6 images named baseft.tga, basebk.tga, baseup.tga,
 basedn.tga, baselt.tga, basert.tga)

fog "density red green blue"
experiment with numbers around 0.1 for density, the color is 0.0 to 1.0 range

contrast <0 to 1>
1.0 is normal, reduce it in steps of 0.05 or so to brighten the screen,
gets pretty washed out below 0.9

brightness <1 to 5>
1.0 is normal, increase it to brighten the game, 5 is ridiculous

r_waterriple <0 to 16>
0 is flat water, 16 is very choppy, higher than that is just plain crazy...

r_particles <0 or 1>
0 disables all particle effects, 1 enables them

gl_vertex <0 or 1>
uses singlepass vertex lighting (not advisable at the moment, as it is using
the transparent polygon engine, and thus no zbuffering, which results in
weird polygon overlap), faster on old singltexture cards.

gl_multitexture <0 or 1>
0 disables multitexture, 1 enables it (only if you have a multitexture
capable driver), note: disabling this is recommended on TNT/TNT2 cards due
to depth contention bugs with multitexture (does not happen on Geforce and
above), so if you see weirdness on glowing textures in maps, disable this.

gl_texsort <0 or 1>
pick whichever is faster for you (0 is more direct, 1 is faster on most
cards, note this does NOT disable multitexture like it did in glquake).

gl_dynamicparticles <0 or 1>
1 is for the killer CPU people, makes particles recieve lighting from the
enviroment (see for yourself).

chase_active <0 or 1>
fixed up chase camera, nice over the shoulder view (chase_up and chase_back
control position) and won't stick into walls.

gl_conalpha <0 to 1>
controls how opaque the console is

gl_vertexarrays <0 or 1>
enables/disables vertex array acceleration (useful only to compare speeds,
otherwise keep it on if your drivers support vertex arrays).

r_speeds <0 or 1>
more mapper info than the original r_speeds! (BSP nodes and leafs relate to
scene complexity)

r_waterriple <0 to 32>
makes the water wavey

r_fullbrights <0 or 1>
must restart map to see results, only affects map textures
(model fullbrights are always enabled), if disabled you don't get glowing
 runes and lights and such

gl_lightmode <0 or 1>
1 enables overbright lighting, but degrades color quality a little (this
looks particularly horrible on 3DFX cards in 16bit - note: 3DFX cards before
the V5 ONLY had 16bit) and slows the framerate a bit, the increased color
range is worth it though (the full software quake color range).

r_farclip <1024 to 65536>
how far you can see in a map before it goes black (glquake used 4096 units,
this defaults to 6144 units).

gl_lightmapalign <1, 2, 4, 8, or 16>
lowering this (default is 4) can use less texture memory, but doesn't work
in NVIDIA drivers, the default of 4 works

gl_lightmaprgba <0 or 1>
if set to 1 this will result in greatly degraded lighting quality in 16bit
mode, no difference either way in 32bit, defaults to off but could possibly
fix problems on certain drivers/cards

(note: lightmaps are only updated when the static lighting animations change;
 dynamic lighting is done using vertex lighting methods to avoid lightmap
 uploads)

gl_nosubimage <0 or 1>
disables partial lightmap uploads entirely (this causes a horrible speed
drain when lightmaps change, but is guarenteed to work on any card)

gl_nosubimagefragments <0 or 1>
uses glquake style lightmap uploads (slow, but not as slow as nosubimage),
keep this off for max speed if it works

r_ambient <0 to 128>
singleplayer cheat, mainly for sake of Nehahra's extremely dark maps

showfps <0 or 1>
displays current framerate in top-right corner

gl_lerpimages <0 or 1>
disabling this speeds up loading but makes textures look worse (like glquake)

slowmo <0 to 1>
this controls the speed of the game (default 1), can be fun for novelty
mainly (can be useful for variable speed demo playback too...)

sys_ticrate <0.01 to 0.1>
controls server rate, this is not a new command, however it applies to
outgoing input packets now, and also limits the speed of the server in
listen mode games...  0.05 (fast modem) or 0.1 (slow modem) is recommended,
can go even lower for high bandwidth players

decors <0 to 1024>
controls how many decors (shell casings, gibs, nails in the walls,
bullet holes, etc) to keep around in mods that care to check it (darkplaces)

cutscene <0 or 1>
whether to play cutscenes in Nehahra and any other mod that checks this

pr_boundscheck <0 or 1>
enabled by default, this makes sure that quake mods can not do nasty things
to your computer, which not surprizingly breaks CRMod, if you feel the need
to run a CRMod server using darkplaces, disable this...  but no guarentees
CRMod will be able to make any sense of the changed data structures

crosshair <0 or 1>
not new, but mentioned here because it has a new look, and has settings below:

crosshair_brightness <0 to 5>
how bright the crosshair is, default 1.0

crosshair_alpha <0 to 1>
how opaque the crosshair is, default 1.0

crosshair_flashspeed <0 to 10>
how quickly the crosshair flashs, default 2 times a second

crosshair_flashrange <0 to 1>
how much the crosshair flashs (use 0 to disable flashing entirely),
default 0.1

r_lightmodels <0 or 1>
enabled by default, this decides whether or not to use directional lighting
on models (only 0.1% speed drain in my testing)

r_explosionclip <0 or 1>
disabled by default, this causes explosion effects to be clipped against the
architecture, some CPU drain results.

snd_swapstereo <0 or 1>
if enabled this swaps the output channels, useful for people with backwards
SB16 sound cards, added this at a friend's request

pausedemo <0 or 1>
halts demo playback until you type pausedemo again, also works for recording

play2 <filename>
plays the sound, a non-directional 'play' without distance fading




movetype enhancements:

MOVETYPE_WALK on non-players - bot coders rejoice!

MOVETYPE_PUSH does not reset solid to SOLID_BSP, but rather to what it was
(fixes teleport train crash in end.bsp)

MOVETYPE_PUSH supports rotation
(untested, just enabled the Quake2 stuff for it)



mod enhancements:
add the included darkplaces.qc file to your mod and read the comments in it
for info on the features.

fragment of wishlist:
Precise aiming (yeah yeah... belongs in a TODO list for new protocol version)
HalfLife model support (EWW the format is horrid)
Quake3 model support
Completely dynamic lighting (wishful thinking...  the CPU drain would probably be horrible)
Model geometry tracing (bullets hitting the polygon mesh, not the box)

Changes since before recorded history (1.03?):
option for vertex lighting instead of lightmap (implemented, too low quality sadly)
fixed HOM around view window when size < 100
added back r_dynamic, r_particles
fixed several particle bugs (bubble trails were not working, other stuff I forget)
square particle textures, rather than triangle, reduces fillrate demand
lit particles
made new model lighting optional (about 0.1% speed difference in my tests)
changed back model lighting scale to match world
emulated fog
eliminated most of the graphics options (gl_flashblend, gl_polyblend, r_lightmaps, r_norefresh, r_lightmaps, various others...  getting complaints already! :)
glowing lightning beams (not the QBism glows, these are real dynamic lighting)
improved directional lighting (per vertex direction and distance)
bounds checking on QuakeC interpreter (still faster than original)
QuakeC interpreter sped up (around 40%?)
128 dynamic sound channels (instead of 8)
particles are sorted like other transparent polygons
256 dynamic lights
"slowmo" cvar (scales time... 1.0 is normal)
fixed r_waterripple
removed BeginDisc (caused NVIDIA driver problems?)
redesigned chase_active (broken, will be fixed)
LINEAR text filtering only if conwidth < glwidth
QC player movement
multiple min/max (FrikaC's idea)
optimized wallpoly copying
optimized depthpoly copying
optimized out unnecessary softwaretransform calls
corrected misspellings in QSG extensions
updated QSG extensions
fixed color blocks in recent changes to score lists (remove 2 chars, make it less tall, use less spacing on main score list)
allow skin colormaps 14 and 15 (freaky :)
longer messagemode
relative dynamic lighting on bmodels
(numerous things omitted and forgotten)

Engine done list (from my todo file, many things likely to be missing from this list)
added NULL GL extension function checks to GLX version (should never happen, but apparently does for some people?), should not crash now but will not use those extensions either
added force_centerview to GLX version
fix bugs with model rendering on G400 and 3DFX Voodoo3/4/5 drivers (they apparently don't comprehend a vertex array step of 0, thus being ignorant toward the GL spec, sigh)
sorted edge rasterizer
add back svc_skybox for nehahra
MOVETYPE_FOLLOW now works correctly on rotating objects
bmodel rotation physics now work
new vid_glx.c (contributed by zinx)
removed DPNEHAHRA engine titling
fixed some lighthalf, fog, and sky related bugs
removed some 3D card hacks
merged GL_Init code for all targets (note: vid_glx.c and vid_3dfxsvga.c may be broken)
split sprite code out in gl_sprites.c
rearranged palette management code
removed all traces of 8bit upload support for now (may be added back)
halved memory usage (although this prevents renderer restarting for the moment)
implemented r_texturestats command
removed old texture upload code
rewrote use of host_parms
rewrote some code relating to host_basepal
bigendian support in pcx loading
changed external texture character equivilant for * from + to # to avoid conflicts with animating textures
removed cruft here and there
force all textures to lowercase to mask potentially silly wad lump names in maps
new crosshairs
more stuff is extern in includes
some general cleanup of the MOVETYPE_PUSH code
rewrote portions of vid_wgl.c
V_UpdatePalette renamed to V_UpdateBlends
removed starting dialog code in wgl
made SV_RecursiveHullCheck accessable in world.h
document -sndspeed option in readme
fixed sky rendering bug (oops, wasn't uploading with alpha)
fixed skin loading bug
update readme to mention that the -nehahra option lets you run Nehahra
update readme to mention that dynamic lighting has been greatly sped up on slow memory machines
reenable r_dynamic and gl_polyblend (due to popular complaint, but only disables a few effects)
rewrote texture upload code (higher quality)
rewrote texture management system
model glowmaps
second rewrite of model system (optimal rendering speed, multipass skin layers)
fixed angle rounding (improved aiming)
fix players above floor in HL maps (by implementing proper hull sizes)
proper support for HL map hull sizes (unfortunately this didn't fix the sinking into grates bug)
fancy crosshair
SV_ChangeTeam function in QC to process all team changes
disabled extrapolation when paused to avoid jittering
make sys_ticrate affect listen servers
fix flickering rocket light
revert normal sky to GLQuake style
added server-side latency based extrapolation (experimental, currently not optional either)
removed SetPal
fix dynamic water lighting (not always working)
showfps
x86 assembly enhancements (cpu_* code)
disabled texture coordinate sanity checks in model loading because threewave CTF has an error in v_star.mdl
copyentity builtin added
transparent statusbar
fixed HOM around view window when size < 100
remove mention of GLQuake in texture slot report
make new model lighting optional (speed test this)
change back model lighting scale to match world
software fog
removed 72 fps cap
eliminated most of the graphics options (gl_flashblend, gl_polyblend, r_lightmaps, r_norefresh
glowing lightning beams
improved directional lighting (per vertex direction and distance)
QuakeC interpreter sped up (around 40%?)
128 dynamic sound channels (instead of 8)
particles are sorted like other transparent polygons
256 dynamic lights
"slowmo" cvar
fixed waterripple
removed BeginDisc (caused TNT driver problems?)
redesigned chase_active
LINEAR text filtering only if conwidth < glwidth
QC player movement
multiple min/max (FrikaC)
optimize wallpoly copying
optimize depthpoly copying
optimize out unnecessary softwaretransforms
correct misspellings in QSG extensions
update QSG extensions
fix color blocks in recent changes to score lists (remove 2 chars, make it less tall, use less spacing on main score list)
allow skin colormaps 14 and 15
longer messagemode (infinity)
relative dynamic lighting on bmodels