// these settings determine how much the view is affected by movement/damage
cl_smoothviewheight 0.05 // time of the averaging to the viewheight value so that it creates a smooth transition for crouching and such. 0 for instant transition
cl_deathfade 0 // fade screen to dark red when dead, value represents how fast the fade is (higher is faster)
-cl_bobcycle 0 // how long the cycle of up/down view movement takes (only works if cl_bob is not 0), default is 0.6
-cl_bob 0.01 // how much view moves up/down when moving (does not move if cl_bobcycle is 0, but still enables cl_bobmodel), default is 0.02
-cl_bob2cycle 0 // how long the cycle of left/right view movement takes (only works if cl_bob2 is not 0), default is 0.6
-cl_bob2 0.01 // how much view moves left/right when moving (does not move if cl_bob2cycle is 0), default is 0.01
+cl_bobcycle 0.5 // how long the cycle of up/down view movement takes (only works if cl_bob is not 0), default is 0.6
+cl_bob 0 // how much view moves up/down when moving (does not move if cl_bobcycle is 0, but still enables cl_bobmodel), default is 0.02
+cl_bob2cycle 1 // how long the cycle of left/right view movement takes (only works if cl_bob2 is not 0), default is 0.6
+cl_bob2 0 // how much view moves left/right when moving (does not move if cl_bob2cycle is 0), default is 0.01
cl_bobfall 0.05 "how much the view swings down when falling (influenced by the speed you hit the ground with)"
cl_bobfallcycle 3 "speed of the bobfall swing"
cl_bobfallspeed 200 "necessary amount of speed for bob-falling to occur"
cl_bobmodel 1 // whether to have gun model move around on screen when moving (only works if cl_bob is not 0), default is 1
+cl_bobmodel_side 0.2 // amount the gun sways to the sides
+cl_bobmodel_speed 5 // rate at which the gun sways
+cl_bobmodel_up 0.1 // amount the gun sways up and down
cl_leanmodel 1 // enables weapon leaning effect when looking around
cl_leanmodel_side_speed 0.7 "gun leaning sideways speed"
cl_leanmodel_side_limit 35 "gun leaning sideways limit"
set g_warmup_majority_factor 0.8 "minimum percentage of players ready needed for warmup to end"
set g_chat_nospectators 0 "if 0 spec/observer chat is always visible to the player, if 1 it is never visible to players, if 2 it is only visible to players during warmup stage"
-set sv_vote_nospectators 0 "if set only players can call a vote (thus spectators and observers can't call a vote)"
+set sv_vote_nospectators 0 "Only players can call a vote (thus spectators and observers can't call a vote): 0 = all people can vote, 1 = spectators can vote in warmup stage, 2 = only players can vote (no exceptions)."
alias g_tourney "g_tourney_$1"
alias g_tourney_1 "g_warmup 1; g_chat_nospectators 2; sv_vote_nospectators 1"
seta g_race_laps_limit -1 "Race laps limit overriding the mapinfo specified one (use 0 to play without limit, and -1 to use the mapinfo's limit)"
seta g_nexball_goallimit -1 "Nexball goal limit overriding the mapinfo specified one (use 0 to play without limit, and -1 to use the mapinfo's limit)"
seta g_nexball_goalleadlimit -1 "Nexball goal lead limit overriding the mapinfo specified one (use 0 to play without limit, and -1 to use the mapinfo's limit)"
+seta g_nexball_safepass_maxdist 5000 // Max distance to allow save fassping (0 to turn off safe passing)
+seta g_nexball_safepass_turnrate 0.1 // How fast the safe-pass ball can habge direction
+seta g_nexball_safepass_holdtime 0.75 // How long to remeber last teammate you pointed at
+seta g_nexball_viewmodel_scale 0.25 // How large the ball for the carrier
+seta g_nexball_viewmodel_offset "8 8 0" // Where the ball is located on carrier "forward right up"
+seta g_nexball_tackling 1 // Allow ball theft?
+
seta g_ctf_ignore_frags 0 "1: regular frags give no points"
set g_tdm_respawn_delay 0
set g_tdm_respawn_waves 0
set g_tdm_weapon_stay 0
+set g_ka_respawn_delay 0
+set g_ka_respawn_waves 0
+set g_ka_weapon_stay 0
set g_kh_respawn_delay 0
set g_kh_respawn_waves 0
set g_kh_weapon_stay 0
set g_ca_weapon_stay 0
set g_ca_damage2score_multiplier 0.01
set g_ca_round_timelimit 180
-set g_nexball_respawn_delay 0
-set g_nexball_respawn_waves 0
-set g_nexball_weapon_stay 0
+set g_nb_respawn_delay 0
+set g_nb_respawn_waves 0
+set g_nb_weapon_stay 0
set g_as_respawn_delay 0
set g_as_respawn_waves 0
set g_as_weapon_stay 0
set g_cts_selfdamage 1 "0 = disable all selfdamage and falldamage in cts"
set g_cts_finish_kill_delay 10 "prevent cheating by running back to the start line, and starting out with more speed than otherwise possible"
set g_cts_weapon_stay 2
-set g_freezetag_respawn_waves 0
-set g_freezetag_respawn_delay 0
-set g_freezetag_weapon_stay 0
-set g_keepaway_respawn_delay 0
-set g_keepaway_respawn_waves 0
-set g_keepaway_weapon_stay 0
+set g_ft_respawn_waves 0
+set g_ft_respawn_delay 0
+set g_ft_weapon_stay 0
// overtime
seta timelimit_overtime 2 "duration in minutes of one added overtime, added to the timelimit"
set g_multijump_add 0 "0 = make the current z velocity equal to jumpvelocity, 1 = add jumpvelocity to the current z velocity"
set g_multijump_speed -999999 "Minimum vertical speed a player must have in order to jump again"
+set g_throughfloor_debug 0 "enable debugging messages for throughfloor calculations"
+set g_throughfloor_damage_max_stddev 2 "Maximum standard deviation for splash damage"
+set g_throughfloor_force_max_stddev 10 "Maximum standard deviation for splash force"
+set g_throughfloor_min_steps_player 1 "Minimum number of steps for splash damage"
+set g_throughfloor_min_steps_other 1 "Minimum number of steps for splash damage"
+set g_throughfloor_max_steps_player 100 "Maximum number of steps for splash damage"
+set g_throughfloor_max_steps_other 10 "Maximum number of steps for splash damage"
+// note: for damage X, 0.25 * ((1-g_throughfloor_damage)*X / g_throughfloor_damage_max_stddev)^2 steps are used
+// for these numbers:
+// damage 25: 3
+// damage 60: 15
+// damage 80: 25
+// damage 200: 157
+// force 250: 10
+// force 300: 15
+// force 600: 57
+
// effects
r_glsl_vertextextureblend_usebothalphas 1 // allows to abuse texture blending as detail texture
r_glsl_postprocess 0 // but note, hud_postprocessing enables this
set lastlevel ""
set quit_when_empty 0 "set to 1, then the server exits when the next level would start but is empty"
set quit_and_redirect "" "set to an IP to redirect all players at the end of the match to another server. Set to \"self\" to let all players reconnect at the end of the match (use it to make seamless engine updates)"
+set quit_and_redirect_timer 1.5 "set to number of seconds after quit before performing the connect operation of quit_and_redirect"
// singleplayer campaign
set g_campaign 0
set con_completion_vdomap map
set con_completion_playermodel models/player/*.iqm
-// these non-saved engine cvars shall be savedG
+// these non-saved engine cvars shall be saved
seta cl_port $cl_port
seta r_showsurfaces $r_showsurfaces
seta r_ambient $r_ambient
seta vid_gl13 $vid_gl13
seta r_drawviewmodel $r_drawviewmodel
seta v_idlescale $v_idlescale
+seta net_slist_queriespersecond $net_slist_queriespersecond
// ticrate
//sys_ticrate 0.0166667
set g_hitplots 0 "when set to 1, hitplots are stored by the server to provide a means of proving that a triggerbot was used"
seta g_hitplots_individuals "" "the individuals, by IP, that should have their hitplots recorded"
-set menu_updatecheck 1
+set menu_updatecheck 1 "check for updates"
+set menu_updatecheck_getpacks 1 "get update packs from update server"
set bot_navigation_ignoreplayers 0 // FIXME remove this once the issue is solved
set bot_sound_monopoly 0 "when enabled, only bots can make any noise"
-set sv_loddistance1 1024
-set sv_loddistance2 4096
-seta cl_playerdetailreduction 0 "the higher, the less detailed player models are displayed (LOD)"
+set cl_loddistance1 1024
+set cl_loddistance2 3072
+seta cl_playerdetailreduction 1 "the higher, the less detailed player models are displayed (LOD)"
+seta cl_modeldetailreduction 1 "the higher, the less detailed certain map models are displayed (LOD)"
set g_mapinfo_settemp_acl "+*" "ACL for mapinfo setting cvars"
alias cl_hook_gamestart_ons
alias cl_hook_gamestart_as
alias cl_hook_gamestart_rc
-alias cl_hook_gamestart_nexball
+alias cl_hook_gamestart_nb
alias cl_hook_gamestart_cts
alias cl_hook_gamestart_ka
-alias cl_hook_gamestart_freezetag
+alias cl_hook_gamestart_ft
alias cl_hook_gameend
alias cl_hook_activeweapon
alias sv_hook_gamestart_ons
alias sv_hook_gamestart_as
alias sv_hook_gamestart_rc
-alias sv_hook_gamestart_nexball
+alias sv_hook_gamestart_nb
alias sv_hook_gamestart_cts
alias sv_hook_gamestart_ka
-alias sv_hook_gamestart_freezetag
+alias sv_hook_gamestart_ft
alias sv_hook_gamerestart
alias sv_hook_gameend
seta cl_gibs_maxcount 100 "maximum amount of gibs (must be at least 1)"
seta cl_vehicle_spiderbot_cross_alpha 0.6
seta cl_vehicle_spiderbot_cross_size 1
+seta cl_vehicles_hudscale 0.5
+seta cl_vehicles_hudalpha 0.75
+seta cl_vehicles_hud_tactical 1
//cl_gunalign calculator
seta menu_cl_gunalign 3 "Gun alignment; 1 = center (if allowed by g_shootfromclient) or right, 2 = center (if allowed by g_shootfromclient) or left, 3 = right only, 4 = left only"
// campaign internal, set when loading a campaign map1G
set _campaign_index ""
set _campaign_name ""
+set _campaign_testrun 0 "To verify the campaign file, set this to 1, then start the first campaign level from the menu. If you end up in the menu again, it's good, if you get a QC crash, it's bad."
// debug
set _independent_players 0 "DO NOT TOUCH"
set g_weaponreplace_laser ""
set g_weaponreplace_shotgun ""
set g_weaponreplace_uzi ""
-set g_weaponreplace_minelayer ""
set g_weaponreplace_grenadelauncher ""
set g_weaponreplace_electro ""
set g_weaponreplace_crylink ""
set g_weaponreplace_porto ""
set g_weaponreplace_minstanex ""
set g_weaponreplace_hook ""
-set g_weaponreplace_hlac ""
-set g_weaponreplace_rifle ""
set g_weaponreplace_tuba ""
set g_weaponreplace_fireball ""
-set g_weaponreplace_seeker ""
set sv_q3acompat_machineshotgunswap 0 "shorthand for swapping uzi and shotgun (for Q3A map compatibility in mapinfo files)"
set g_movement_highspeed 1 "movement speed modification factor (only changes movement when above maxspeed)"
scr_loadingscreen_background 0
scr_loadingscreen_barcolor "0 0.5 1"
scr_loadingscreen_barheight 12
-scr_loadingscreen_count 13
+scr_loadingscreen_count 14
+scr_loadingscreen_firstforstartup 1
scr_loadingscreen_scale 999
scr_loadingscreen_scale_base 1
scr_loadingscreen_scale_limit 2
// other config files
+exec mutator_new_toys.cfg // run BEFORE balance to make sure balance wins
exec balanceXonotic.cfg
exec ctfscoring-ai.cfg
exec effects-normal.cfg
// enable menu syncing
alias menu_sync "menu_cmd sync"
+
+set sv_join_notices ""
+set sv_join_notices_time 15
projects / xonotic / xonotic-data.pk3dir.git / blobdiff