/* SDL - Simple DirectMedia Layer Copyright (C) 1997-2009 Sam Lantinga This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Sam Lantinga slouken@libsdl.org */ /** @file SDL_video.h * Header file for access to the SDL raw framebuffer window */ #ifndef _SDL_video_h #define _SDL_video_h #include "SDL_stdinc.h" #include "SDL_error.h" #include "SDL_rwops.h" #include "begin_code.h" /* Set up for C function definitions, even when using C++ */ #ifdef __cplusplus extern "C" { #endif /** @name Transparency definitions * These define alpha as the opacity of a surface */ /*@{*/ #define SDL_ALPHA_OPAQUE 255 #define SDL_ALPHA_TRANSPARENT 0 /*@}*/ /** @name Useful data types */ /*@{*/ typedef struct SDL_Rect { Sint16 x, y; Uint16 w, h; } SDL_Rect; typedef struct SDL_Color { Uint8 r; Uint8 g; Uint8 b; Uint8 unused; } SDL_Color; #define SDL_Colour SDL_Color typedef struct SDL_Palette { int ncolors; SDL_Color *colors; } SDL_Palette; /*@}*/ /** Everything in the pixel format structure is read-only */ typedef struct SDL_PixelFormat { SDL_Palette *palette; Uint8 BitsPerPixel; Uint8 BytesPerPixel; Uint8 Rloss; Uint8 Gloss; Uint8 Bloss; Uint8 Aloss; Uint8 Rshift; Uint8 Gshift; Uint8 Bshift; Uint8 Ashift; Uint32 Rmask; Uint32 Gmask; Uint32 Bmask; Uint32 Amask; /** RGB color key information */ Uint32 colorkey; /** Alpha value information (per-surface alpha) */ Uint8 alpha; } SDL_PixelFormat; /** This structure should be treated as read-only, except for 'pixels', * which, if not NULL, contains the raw pixel data for the surface. */ typedef struct SDL_Surface { Uint32 flags; /**< Read-only */ SDL_PixelFormat *format; /**< Read-only */ int w, h; /**< Read-only */ Uint16 pitch; /**< Read-only */ void *pixels; /**< Read-write */ int offset; /**< Private */ /** Hardware-specific surface info */ struct private_hwdata *hwdata; /** clipping information */ SDL_Rect clip_rect; /**< Read-only */ Uint32 unused1; /**< for binary compatibility */ /** Allow recursive locks */ Uint32 locked; /**< Private */ /** info for fast blit mapping to other surfaces */ struct SDL_BlitMap *map; /**< Private */ /** format version, bumped at every change to invalidate blit maps */ unsigned int format_version; /**< Private */ /** Reference count -- used when freeing surface */ int refcount; /**< Read-mostly */ } SDL_Surface; /** @name SDL_Surface Flags * These are the currently supported flags for the SDL_surface */ /*@{*/ /** Available for SDL_CreateRGBSurface() or SDL_SetVideoMode() */ /*@{*/ #define SDL_SWSURFACE 0x00000000 /**< Surface is in system memory */ #define SDL_HWSURFACE 0x00000001 /**< Surface is in video memory */ #define SDL_ASYNCBLIT 0x00000004 /**< Use asynchronous blits if possible */ /*@}*/ /** Available for SDL_SetVideoMode() */ /*@{*/ #define SDL_ANYFORMAT 0x10000000 /**< Allow any video depth/pixel-format */ #define SDL_HWPALETTE 0x20000000 /**< Surface has exclusive palette */ #define SDL_DOUBLEBUF 0x40000000 /**< Set up double-buffered video mode */ #define SDL_FULLSCREEN 0x80000000 /**< Surface is a full screen display */ #define SDL_OPENGL 0x00000002 /**< Create an OpenGL rendering context */ #define SDL_OPENGLBLIT 0x0000000A /**< Create an OpenGL rendering context and use it for blitting */ #define SDL_RESIZABLE 0x00000010 /**< This video mode may be resized */ #define SDL_NOFRAME 0x00000020 /**< No window caption or edge frame */ /*@}*/ /** Used internally (read-only) */ /*@{*/ #define SDL_HWACCEL 0x00000100 /**< Blit uses hardware acceleration */ #define SDL_SRCCOLORKEY 0x00001000 /**< Blit uses a source color key */ #define SDL_RLEACCELOK 0x00002000 /**< Private flag */ #define SDL_RLEACCEL 0x00004000 /**< Surface is RLE encoded */ #define SDL_SRCALPHA 0x00010000 /**< Blit uses source alpha blending */ #define SDL_PREALLOC 0x01000000 /**< Surface uses preallocated memory */ /*@}*/ /*@}*/ /** Evaluates to true if the surface needs to be locked before access */ #define SDL_MUSTLOCK(surface) \ (surface->offset || \ ((surface->flags & (SDL_HWSURFACE|SDL_ASYNCBLIT|SDL_RLEACCEL)) != 0)) /** typedef for private surface blitting functions */ typedef int (*SDL_blit)(struct SDL_Surface *src, SDL_Rect *srcrect, struct SDL_Surface *dst, SDL_Rect *dstrect); /** Useful for determining the video hardware capabilities */ typedef struct SDL_VideoInfo { Uint32 hw_available :1; /**< Flag: Can you create hardware surfaces? */ Uint32 wm_available :1; /**< Flag: Can you talk to a window manager? */ Uint32 UnusedBits1 :6; Uint32 UnusedBits2 :1; Uint32 blit_hw :1; /**< Flag: Accelerated blits HW --> HW */ Uint32 blit_hw_CC :1; /**< Flag: Accelerated blits with Colorkey */ Uint32 blit_hw_A :1; /**< Flag: Accelerated blits with Alpha */ Uint32 blit_sw :1; /**< Flag: Accelerated blits SW --> HW */ Uint32 blit_sw_CC :1; /**< Flag: Accelerated blits with Colorkey */ Uint32 blit_sw_A :1; /**< Flag: Accelerated blits with Alpha */ Uint32 blit_fill :1; /**< Flag: Accelerated color fill */ Uint32 UnusedBits3 :16; Uint32 video_mem; /**< The total amount of video memory (in K) */ SDL_PixelFormat *vfmt; /**< Value: The format of the video surface */ int current_w; /**< Value: The current video mode width */ int current_h; /**< Value: The current video mode height */ } SDL_VideoInfo; /** @name Overlay Formats * The most common video overlay formats. * For an explanation of these pixel formats, see: * http://www.webartz.com/fourcc/indexyuv.htm * * For information on the relationship between color spaces, see: * http://www.neuro.sfc.keio.ac.jp/~aly/polygon/info/color-space-faq.html */ /*@{*/ #define SDL_YV12_OVERLAY 0x32315659 /**< Planar mode: Y + V + U (3 planes) */ #define SDL_IYUV_OVERLAY 0x56555949 /**< Planar mode: Y + U + V (3 planes) */ #define SDL_YUY2_OVERLAY 0x32595559 /**< Packed mode: Y0+U0+Y1+V0 (1 plane) */ #define SDL_UYVY_OVERLAY 0x59565955 /**< Packed mode: U0+Y0+V0+Y1 (1 plane) */ #define SDL_YVYU_OVERLAY 0x55595659 /**< Packed mode: Y0+V0+Y1+U0 (1 plane) */ /*@}*/ /** The YUV hardware video overlay */ typedef struct SDL_Overlay { Uint32 format; /**< Read-only */ int w, h; /**< Read-only */ int planes; /**< Read-only */ Uint16 *pitches; /**< Read-only */ Uint8 **pixels; /**< Read-write */ /** @name Hardware-specific surface info */ /*@{*/ struct private_yuvhwfuncs *hwfuncs; struct private_yuvhwdata *hwdata; /*@{*/ /** @name Special flags */ /*@{*/ Uint32 hw_overlay :1; /**< Flag: This overlay hardware accelerated? */ Uint32 UnusedBits :31; /*@}*/ } SDL_Overlay; /** Public enumeration for setting the OpenGL window attributes. */ typedef enum { SDL_GL_RED_SIZE, SDL_GL_GREEN_SIZE, SDL_GL_BLUE_SIZE, SDL_GL_ALPHA_SIZE, SDL_GL_BUFFER_SIZE, SDL_GL_DOUBLEBUFFER, SDL_GL_DEPTH_SIZE, SDL_GL_STENCIL_SIZE, SDL_GL_ACCUM_RED_SIZE, SDL_GL_ACCUM_GREEN_SIZE, SDL_GL_ACCUM_BLUE_SIZE, SDL_GL_ACCUM_ALPHA_SIZE, SDL_GL_STEREO, SDL_GL_MULTISAMPLEBUFFERS, SDL_GL_MULTISAMPLESAMPLES, SDL_GL_ACCELERATED_VISUAL, SDL_GL_SWAP_CONTROL } SDL_GLattr; /** @name flags for SDL_SetPalette() */ /*@{*/ #define SDL_LOGPAL 0x01 #define SDL_PHYSPAL 0x02 /*@}*/ /* Function prototypes */ /** * @name Video Init and Quit * These functions are used internally, and should not be used unless you * have a specific need to specify the video driver you want to use. * You should normally use SDL_Init() or SDL_InitSubSystem(). */ /*@{*/ /** * Initializes the video subsystem. Sets up a connection * to the window manager, etc, and determines the current video mode and * pixel format, but does not initialize a window or graphics mode. * Note that event handling is activated by this routine. * * If you use both sound and video in your application, you need to call * SDL_Init() before opening the sound device, otherwise under Win32 DirectX, * you won't be able to set full-screen display modes. */ extern DECLSPEC int SDLCALL SDL_VideoInit(const char *driver_name, Uint32 flags); extern DECLSPEC void SDLCALL SDL_VideoQuit(void); /*@}*/ /** * This function fills the given character buffer with the name of the * video driver, and returns a pointer to it if the video driver has * been initialized. It returns NULL if no driver has been initialized. */ extern DECLSPEC char * SDLCALL SDL_VideoDriverName(char *namebuf, int maxlen); /** * This function returns a pointer to the current display surface. * If SDL is doing format conversion on the display surface, this * function returns the publicly visible surface, not the real video * surface. */ extern DECLSPEC SDL_Surface * SDLCALL SDL_GetVideoSurface(void); /** * This function returns a read-only pointer to information about the * video hardware. If this is called before SDL_SetVideoMode(), the 'vfmt' * member of the returned structure will contain the pixel format of the * "best" video mode. */ extern DECLSPEC const SDL_VideoInfo * SDLCALL SDL_GetVideoInfo(void); /** * Check to see if a particular video mode is supported. * It returns 0 if the requested mode is not supported under any bit depth, * or returns the bits-per-pixel of the closest available mode with the * given width and height. If this bits-per-pixel is different from the * one used when setting the video mode, SDL_SetVideoMode() will succeed, * but will emulate the requested bits-per-pixel with a shadow surface. * * The arguments to SDL_VideoModeOK() are the same ones you would pass to * SDL_SetVideoMode() */ extern DECLSPEC int SDLCALL SDL_VideoModeOK(int width, int height, int bpp, Uint32 flags); /** * Return a pointer to an array of available screen dimensions for the * given format and video flags, sorted largest to smallest. Returns * NULL if there are no dimensions available for a particular format, * or (SDL_Rect **)-1 if any dimension is okay for the given format. * * If 'format' is NULL, the mode list will be for the format given * by SDL_GetVideoInfo()->vfmt */ extern DECLSPEC SDL_Rect ** SDLCALL SDL_ListModes(SDL_PixelFormat *format, Uint32 flags); /** * Set up a video mode with the specified width, height and bits-per-pixel. * * If 'bpp' is 0, it is treated as the current display bits per pixel. * * If SDL_ANYFORMAT is set in 'flags', the SDL library will try to set the * requested bits-per-pixel, but will return whatever video pixel format is * available. The default is to emulate the requested pixel format if it * is not natively available. * * If SDL_HWSURFACE is set in 'flags', the video surface will be placed in * video memory, if possible, and you may have to call SDL_LockSurface() * in order to access the raw framebuffer. Otherwise, the video surface * will be created in system memory. * * If SDL_ASYNCBLIT is set in 'flags', SDL will try to perform rectangle * updates asynchronously, but you must always lock before accessing pixels. * SDL will wait for updates to complete before returning from the lock. * * If SDL_HWPALETTE is set in 'flags', the SDL library will guarantee * that the colors set by SDL_SetColors() will be the colors you get. * Otherwise, in 8-bit mode, SDL_SetColors() may not be able to set all * of the colors exactly the way they are requested, and you should look * at the video surface structure to determine the actual palette. * If SDL cannot guarantee that the colors you request can be set, * i.e. if the colormap is shared, then the video surface may be created * under emulation in system memory, overriding the SDL_HWSURFACE flag. * * If SDL_FULLSCREEN is set in 'flags', the SDL library will try to set * a fullscreen video mode. The default is to create a windowed mode * if the current graphics system has a window manager. * If the SDL library is able to set a fullscreen video mode, this flag * will be set in the surface that is returned. * * If SDL_DOUBLEBUF is set in 'flags', the SDL library will try to set up * two surfaces in video memory and swap between them when you call * SDL_Flip(). This is usually slower than the normal single-buffering * scheme, but prevents "tearing" artifacts caused by modifying video * memory while the monitor is refreshing. It should only be used by * applications that redraw the entire screen on every update. * * If SDL_RESIZABLE is set in 'flags', the SDL library will allow the * window manager, if any, to resize the window at runtime. When this * occurs, SDL will send a SDL_VIDEORESIZE event to you application, * and you must respond to the event by re-calling SDL_SetVideoMode() * with the requested size (or another size that suits the application). * * If SDL_NOFRAME is set in 'flags', the SDL library will create a window * without any title bar or frame decoration. Fullscreen video modes have * this flag set automatically. * * This function returns the video framebuffer surface, or NULL if it fails. * * If you rely on functionality provided by certain video flags, check the * flags of the returned surface to make sure that functionality is available. * SDL will fall back to reduced functionality if the exact flags you wanted * are not available. */ extern DECLSPEC SDL_Surface * SDLCALL SDL_SetVideoMode (int width, int height, int bpp, Uint32 flags); /** @name SDL_Update Functions * These functions should not be called while 'screen' is locked. */ /*@{*/ /** * Makes sure the given list of rectangles is updated on the given screen. */ extern DECLSPEC void SDLCALL SDL_UpdateRects (SDL_Surface *screen, int numrects, SDL_Rect *rects); /** * If 'x', 'y', 'w' and 'h' are all 0, SDL_UpdateRect will update the entire * screen. */ extern DECLSPEC void SDLCALL SDL_UpdateRect (SDL_Surface *screen, Sint32 x, Sint32 y, Uint32 w, Uint32 h); /*@}*/ /** * On hardware that supports double-buffering, this function sets up a flip * and returns. The hardware will wait for vertical retrace, and then swap * video buffers before the next video surface blit or lock will return. * On hardware that doesn not support double-buffering, this is equivalent * to calling SDL_UpdateRect(screen, 0, 0, 0, 0); * The SDL_DOUBLEBUF flag must have been passed to SDL_SetVideoMode() when * setting the video mode for this function to perform hardware flipping. * This function returns 0 if successful, or -1 if there was an error. */ extern DECLSPEC int SDLCALL SDL_Flip(SDL_Surface *screen); /** * Set the gamma correction for each of the color channels. * The gamma values range (approximately) between 0.1 and 10.0 * * If this function isn't supported directly by the hardware, it will * be emulated using gamma ramps, if available. If successful, this * function returns 0, otherwise it returns -1. */ extern DECLSPEC int SDLCALL SDL_SetGamma(float red, float green, float blue); /** * Set the gamma translation table for the red, green, and blue channels * of the video hardware. Each table is an array of 256 16-bit quantities, * representing a mapping between the input and output for that channel. * The input is the index into the array, and the output is the 16-bit * gamma value at that index, scaled to the output color precision. * * You may pass NULL for any of the channels to leave it unchanged. * If the call succeeds, it will return 0. If the display driver or * hardware does not support gamma translation, or otherwise fails, * this function will return -1. */ extern DECLSPEC int SDLCALL SDL_SetGammaRamp(const Uint16 *red, const Uint16 *green, const Uint16 *blue); /** * Retrieve the current values of the gamma translation tables. * * You must pass in valid pointers to arrays of 256 16-bit quantities. * Any of the pointers may be NULL to ignore that channel. * If the call succeeds, it will return 0. If the display driver or * hardware does not support gamma translation, or otherwise fails, * this function will return -1. */ extern DECLSPEC int SDLCALL SDL_GetGammaRamp(Uint16 *red, Uint16 *green, Uint16 *blue); /** * Sets a portion of the colormap for the given 8-bit surface. If 'surface' * is not a palettized surface, this function does nothing, returning 0. * If all of the colors were set as passed to SDL_SetColors(), it will * return 1. If not all the color entries were set exactly as given, * it will return 0, and you should look at the surface palette to * determine the actual color palette. * * When 'surface' is the surface associated with the current display, the * display colormap will be updated with the requested colors. If * SDL_HWPALETTE was set in SDL_SetVideoMode() flags, SDL_SetColors() * will always return 1, and the palette is guaranteed to be set the way * you desire, even if the window colormap has to be warped or run under * emulation. */ extern DECLSPEC int SDLCALL SDL_SetColors(SDL_Surface *surface, SDL_Color *colors, int firstcolor, int ncolors); /** * Sets a portion of the colormap for a given 8-bit surface. * 'flags' is one or both of: * SDL_LOGPAL -- set logical palette, which controls how blits are mapped * to/from the surface, * SDL_PHYSPAL -- set physical palette, which controls how pixels look on * the screen * Only screens have physical palettes. Separate change of physical/logical * palettes is only possible if the screen has SDL_HWPALETTE set. * * The return value is 1 if all colours could be set as requested, and 0 * otherwise. * * SDL_SetColors() is equivalent to calling this function with * flags = (SDL_LOGPAL|SDL_PHYSPAL). */ extern DECLSPEC int SDLCALL SDL_SetPalette(SDL_Surface *surface, int flags, SDL_Color *colors, int firstcolor, int ncolors); /** * Maps an RGB triple to an opaque pixel value for a given pixel format */ extern DECLSPEC Uint32 SDLCALL SDL_MapRGB (const SDL_PixelFormat * const format, const Uint8 r, const Uint8 g, const Uint8 b); /** * Maps an RGBA quadruple to a pixel value for a given pixel format */ extern DECLSPEC Uint32 SDLCALL SDL_MapRGBA (const SDL_PixelFormat * const format, const Uint8 r, const Uint8 g, const Uint8 b, const Uint8 a); /** * Maps a pixel value into the RGB components for a given pixel format */ extern DECLSPEC void SDLCALL SDL_GetRGB(Uint32 pixel, const SDL_PixelFormat * const fmt, Uint8 *r, Uint8 *g, Uint8 *b); /** * Maps a pixel value into the RGBA components for a given pixel format */ extern DECLSPEC void SDLCALL SDL_GetRGBA(Uint32 pixel, const SDL_PixelFormat * const fmt, Uint8 *r, Uint8 *g, Uint8 *b, Uint8 *a); /** @sa SDL_CreateRGBSurface */ #define SDL_AllocSurface SDL_CreateRGBSurface /** * Allocate and free an RGB surface (must be called after SDL_SetVideoMode) * If the depth is 4 or 8 bits, an empty palette is allocated for the surface. * If the depth is greater than 8 bits, the pixel format is set using the * flags '[RGB]mask'. * If the function runs out of memory, it will return NULL. * * The 'flags' tell what kind of surface to create. * SDL_SWSURFACE means that the surface should be created in system memory. * SDL_HWSURFACE means that the surface should be created in video memory, * with the same format as the display surface. This is useful for surfaces * that will not change much, to take advantage of hardware acceleration * when being blitted to the display surface. * SDL_ASYNCBLIT means that SDL will try to perform asynchronous blits with * this surface, but you must always lock it before accessing the pixels. * SDL will wait for current blits to finish before returning from the lock. * SDL_SRCCOLORKEY indicates that the surface will be used for colorkey blits. * If the hardware supports acceleration of colorkey blits between * two surfaces in video memory, SDL will try to place the surface in * video memory. If this isn't possible or if there is no hardware * acceleration available, the surface will be placed in system memory. * SDL_SRCALPHA means that the surface will be used for alpha blits and * if the hardware supports hardware acceleration of alpha blits between * two surfaces in video memory, to place the surface in video memory * if possible, otherwise it will be placed in system memory. * If the surface is created in video memory, blits will be _much_ faster, * but the surface format must be identical to the video surface format, * and the only way to access the pixels member of the surface is to use * the SDL_LockSurface() and SDL_UnlockSurface() calls. * If the requested surface actually resides in video memory, SDL_HWSURFACE * will be set in the flags member of the returned surface. If for some * reason the surface could not be placed in video memory, it will not have * the SDL_HWSURFACE flag set, and will be created in system memory instead. */ extern DECLSPEC SDL_Surface * SDLCALL SDL_CreateRGBSurface (Uint32 flags, int width, int height, int depth, Uint32 Rmask, Uint32 Gmask, Uint32 Bmask, Uint32 Amask); /** @sa SDL_CreateRGBSurface */ extern DECLSPEC SDL_Surface * SDLCALL SDL_CreateRGBSurfaceFrom(void *pixels, int width, int height, int depth, int pitch, Uint32 Rmask, Uint32 Gmask, Uint32 Bmask, Uint32 Amask); extern DECLSPEC void SDLCALL SDL_FreeSurface(SDL_Surface *surface); /** * SDL_LockSurface() sets up a surface for directly accessing the pixels. * Between calls to SDL_LockSurface()/SDL_UnlockSurface(), you can write * to and read from 'surface->pixels', using the pixel format stored in * 'surface->format'. Once you are done accessing the surface, you should * use SDL_UnlockSurface() to release it. * * Not all surfaces require locking. If SDL_MUSTLOCK(surface) evaluates * to 0, then you can read and write to the surface at any time, and the * pixel format of the surface will not change. In particular, if the * SDL_HWSURFACE flag is not given when calling SDL_SetVideoMode(), you * will not need to lock the display surface before accessing it. * * No operating system or library calls should be made between lock/unlock * pairs, as critical system locks may be held during this time. * * SDL_LockSurface() returns 0, or -1 if the surface couldn't be locked. */ extern DECLSPEC int SDLCALL SDL_LockSurface(SDL_Surface *surface); extern DECLSPEC void SDLCALL SDL_UnlockSurface(SDL_Surface *surface); /** * Load a surface from a seekable SDL data source (memory or file.) * If 'freesrc' is non-zero, the source will be closed after being read. * Returns the new surface, or NULL if there was an error. * The new surface should be freed with SDL_FreeSurface(). */ extern DECLSPEC SDL_Surface * SDLCALL SDL_LoadBMP_RW(SDL_RWops *src, int freesrc); /** Convenience macro -- load a surface from a file */ #define SDL_LoadBMP(file) SDL_LoadBMP_RW(SDL_RWFromFile(file, "rb"), 1) /** * Save a surface to a seekable SDL data source (memory or file.) * If 'freedst' is non-zero, the source will be closed after being written. * Returns 0 if successful or -1 if there was an error. */ extern DECLSPEC int SDLCALL SDL_SaveBMP_RW (SDL_Surface *surface, SDL_RWops *dst, int freedst); /** Convenience macro -- save a surface to a file */ #define SDL_SaveBMP(surface, file) \ SDL_SaveBMP_RW(surface, SDL_RWFromFile(file, "wb"), 1) /** * Sets the color key (transparent pixel) in a blittable surface. * If 'flag' is SDL_SRCCOLORKEY (optionally OR'd with SDL_RLEACCEL), * 'key' will be the transparent pixel in the source image of a blit. * SDL_RLEACCEL requests RLE acceleration for the surface if present, * and removes RLE acceleration if absent. * If 'flag' is 0, this function clears any current color key. * This function returns 0, or -1 if there was an error. */ extern DECLSPEC int SDLCALL SDL_SetColorKey (SDL_Surface *surface, Uint32 flag, Uint32 key); /** * This function sets the alpha value for the entire surface, as opposed to * using the alpha component of each pixel. This value measures the range * of transparency of the surface, 0 being completely transparent to 255 * being completely opaque. An 'alpha' value of 255 causes blits to be * opaque, the source pixels copied to the destination (the default). Note * that per-surface alpha can be combined with colorkey transparency. * * If 'flag' is 0, alpha blending is disabled for the surface. * If 'flag' is SDL_SRCALPHA, alpha blending is enabled for the surface. * OR:ing the flag with SDL_RLEACCEL requests RLE acceleration for the * surface; if SDL_RLEACCEL is not specified, the RLE accel will be removed. * * The 'alpha' parameter is ignored for surfaces that have an alpha channel. */ extern DECLSPEC int SDLCALL SDL_SetAlpha(SDL_Surface *surface, Uint32 flag, Uint8 alpha); /** * Sets the clipping rectangle for the destination surface in a blit. * * If the clip rectangle is NULL, clipping will be disabled. * If the clip rectangle doesn't intersect the surface, the function will * return SDL_FALSE and blits will be completely clipped. Otherwise the * function returns SDL_TRUE and blits to the surface will be clipped to * the intersection of the surface area and the clipping rectangle. * * Note that blits are automatically clipped to the edges of the source * and destination surfaces. */ extern DECLSPEC SDL_bool SDLCALL SDL_SetClipRect(SDL_Surface *surface, const SDL_Rect *rect); /** * Gets the clipping rectangle for the destination surface in a blit. * 'rect' must be a pointer to a valid rectangle which will be filled * with the correct values. */ extern DECLSPEC void SDLCALL SDL_GetClipRect(SDL_Surface *surface, SDL_Rect *rect); /** * Creates a new surface of the specified format, and then copies and maps * the given surface to it so the blit of the converted surface will be as * fast as possible. If this function fails, it returns NULL. * * The 'flags' parameter is passed to SDL_CreateRGBSurface() and has those * semantics. You can also pass SDL_RLEACCEL in the flags parameter and * SDL will try to RLE accelerate colorkey and alpha blits in the resulting * surface. * * This function is used internally by SDL_DisplayFormat(). */ extern DECLSPEC SDL_Surface * SDLCALL SDL_ConvertSurface (SDL_Surface *src, SDL_PixelFormat *fmt, Uint32 flags); /** * This performs a fast blit from the source surface to the destination * surface. It assumes that the source and destination rectangles are * the same size. If either 'srcrect' or 'dstrect' are NULL, the entire * surface (src or dst) is copied. The final blit rectangles are saved * in 'srcrect' and 'dstrect' after all clipping is performed. * If the blit is successful, it returns 0, otherwise it returns -1. * * The blit function should not be called on a locked surface. * * The blit semantics for surfaces with and without alpha and colorkey * are defined as follows: * * RGBA->RGB: * SDL_SRCALPHA set: * alpha-blend (using alpha-channel). * SDL_SRCCOLORKEY ignored. * SDL_SRCALPHA not set: * copy RGB. * if SDL_SRCCOLORKEY set, only copy the pixels matching the * RGB values of the source colour key, ignoring alpha in the * comparison. * * RGB->RGBA: * SDL_SRCALPHA set: * alpha-blend (using the source per-surface alpha value); * set destination alpha to opaque. * SDL_SRCALPHA not set: * copy RGB, set destination alpha to source per-surface alpha value. * both: * if SDL_SRCCOLORKEY set, only copy the pixels matching the * source colour key. * * RGBA->RGBA: * SDL_SRCALPHA set: * alpha-blend (using the source alpha channel) the RGB values; * leave destination alpha untouched. [Note: is this correct?] * SDL_SRCCOLORKEY ignored. * SDL_SRCALPHA not set: * copy all of RGBA to the destination. * if SDL_SRCCOLORKEY set, only copy the pixels matching the * RGB values of the source colour key, ignoring alpha in the * comparison. * * RGB->RGB: * SDL_SRCALPHA set: * alpha-blend (using the source per-surface alpha value). * SDL_SRCALPHA not set: * copy RGB. * both: * if SDL_SRCCOLORKEY set, only copy the pixels matching the * source colour key. * * If either of the surfaces were in video memory, and the blit returns -2, * the video memory was lost, so it should be reloaded with artwork and * re-blitted: * @code * while ( SDL_BlitSurface(image, imgrect, screen, dstrect) == -2 ) { * while ( SDL_LockSurface(image) < 0 ) * Sleep(10); * -- Write image pixels to image->pixels -- * SDL_UnlockSurface(image); * } * @endcode * * This happens under DirectX 5.0 when the system switches away from your * fullscreen application. The lock will also fail until you have access * to the video memory again. * * You should call SDL_BlitSurface() unless you know exactly how SDL * blitting works internally and how to use the other blit functions. */ #define SDL_BlitSurface SDL_UpperBlit /** This is the public blit function, SDL_BlitSurface(), and it performs * rectangle validation and clipping before passing it to SDL_LowerBlit() */ extern DECLSPEC int SDLCALL SDL_UpperBlit (SDL_Surface *src, SDL_Rect *srcrect, SDL_Surface *dst, SDL_Rect *dstrect); /** This is a semi-private blit function and it performs low-level surface * blitting only. */ extern DECLSPEC int SDLCALL SDL_LowerBlit (SDL_Surface *src, SDL_Rect *srcrect, SDL_Surface *dst, SDL_Rect *dstrect); /** * This function performs a fast fill of the given rectangle with 'color' * The given rectangle is clipped to the destination surface clip area * and the final fill rectangle is saved in the passed in pointer. * If 'dstrect' is NULL, the whole surface will be filled with 'color' * The color should be a pixel of the format used by the surface, and * can be generated by the SDL_MapRGB() function. * This function returns 0 on success, or -1 on error. */ extern DECLSPEC int SDLCALL SDL_FillRect (SDL_Surface *dst, SDL_Rect *dstrect, Uint32 color); /** * This function takes a surface and copies it to a new surface of the * pixel format and colors of the video framebuffer, suitable for fast * blitting onto the display surface. It calls SDL_ConvertSurface() * * If you want to take advantage of hardware colorkey or alpha blit * acceleration, you should set the colorkey and alpha value before * calling this function. * * If the conversion fails or runs out of memory, it returns NULL */ extern DECLSPEC SDL_Surface * SDLCALL SDL_DisplayFormat(SDL_Surface *surface); /** * This function takes a surface and copies it to a new surface of the * pixel format and colors of the video framebuffer (if possible), * suitable for fast alpha blitting onto the display surface. * The new surface will always have an alpha channel. * * If you want to take advantage of hardware colorkey or alpha blit * acceleration, you should set the colorkey and alpha value before * calling this function. * * If the conversion fails or runs out of memory, it returns NULL */ extern DECLSPEC SDL_Surface * SDLCALL SDL_DisplayFormatAlpha(SDL_Surface *surface); /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /** @name YUV video surface overlay functions */ /*@{*/ /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /** This function creates a video output overlay * Calling the returned surface an overlay is something of a misnomer because * the contents of the display surface underneath the area where the overlay * is shown is undefined - it may be overwritten with the converted YUV data. */ extern DECLSPEC SDL_Overlay * SDLCALL SDL_CreateYUVOverlay(int width, int height, Uint32 format, SDL_Surface *display); /** Lock an overlay for direct access, and unlock it when you are done */ extern DECLSPEC int SDLCALL SDL_LockYUVOverlay(SDL_Overlay *overlay); extern DECLSPEC void SDLCALL SDL_UnlockYUVOverlay(SDL_Overlay *overlay); /** Blit a video overlay to the display surface. * The contents of the video surface underneath the blit destination are * not defined. * The width and height of the destination rectangle may be different from * that of the overlay, but currently only 2x scaling is supported. */ extern DECLSPEC int SDLCALL SDL_DisplayYUVOverlay(SDL_Overlay *overlay, SDL_Rect *dstrect); /** Free a video overlay */ extern DECLSPEC void SDLCALL SDL_FreeYUVOverlay(SDL_Overlay *overlay); /*@}*/ /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /** @name OpenGL support functions. */ /*@{*/ /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /** * Dynamically load an OpenGL library, or the default one if path is NULL * * If you do this, you need to retrieve all of the GL functions used in * your program from the dynamic library using SDL_GL_GetProcAddress(). */ extern DECLSPEC int SDLCALL SDL_GL_LoadLibrary(const char *path); /** * Get the address of a GL function */ extern DECLSPEC void * SDLCALL SDL_GL_GetProcAddress(const char* proc); /** * Set an attribute of the OpenGL subsystem before intialization. */ extern DECLSPEC int SDLCALL SDL_GL_SetAttribute(SDL_GLattr attr, int value); /** * Get an attribute of the OpenGL subsystem from the windowing * interface, such as glX. This is of course different from getting * the values from SDL's internal OpenGL subsystem, which only * stores the values you request before initialization. * * Developers should track the values they pass into SDL_GL_SetAttribute * themselves if they want to retrieve these values. */ extern DECLSPEC int SDLCALL SDL_GL_GetAttribute(SDL_GLattr attr, int* value); /** * Swap the OpenGL buffers, if double-buffering is supported. */ extern DECLSPEC void SDLCALL SDL_GL_SwapBuffers(void); /** @name OpenGL Internal Functions * Internal functions that should not be called unless you have read * and understood the source code for these functions. */ /*@{*/ extern DECLSPEC void SDLCALL SDL_GL_UpdateRects(int numrects, SDL_Rect* rects); extern DECLSPEC void SDLCALL SDL_GL_Lock(void); extern DECLSPEC void SDLCALL SDL_GL_Unlock(void); /*@}*/ /*@}*/ /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /** @name Window Manager Functions */ /** These functions allow interaction with the window manager, if any. */ /*@{*/ /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /** * Sets the title and icon text of the display window (UTF-8 encoded) */ extern DECLSPEC void SDLCALL SDL_WM_SetCaption(const char *title, const char *icon); /** * Gets the title and icon text of the display window (UTF-8 encoded) */ extern DECLSPEC void SDLCALL SDL_WM_GetCaption(char **title, char **icon); /** * Sets the icon for the display window. * This function must be called before the first call to SDL_SetVideoMode(). * It takes an icon surface, and a mask in MSB format. * If 'mask' is NULL, the entire icon surface will be used as the icon. */ extern DECLSPEC void SDLCALL SDL_WM_SetIcon(SDL_Surface *icon, Uint8 *mask); /** * This function iconifies the window, and returns 1 if it succeeded. * If the function succeeds, it generates an SDL_APPACTIVE loss event. * This function is a noop and returns 0 in non-windowed environments. */ extern DECLSPEC int SDLCALL SDL_WM_IconifyWindow(void); /** * Toggle fullscreen mode without changing the contents of the screen. * If the display surface does not require locking before accessing * the pixel information, then the memory pointers will not change. * * If this function was able to toggle fullscreen mode (change from * running in a window to fullscreen, or vice-versa), it will return 1. * If it is not implemented, or fails, it returns 0. * * The next call to SDL_SetVideoMode() will set the mode fullscreen * attribute based on the flags parameter - if SDL_FULLSCREEN is not * set, then the display will be windowed by default where supported. * * This is currently only implemented in the X11 video driver. */ extern DECLSPEC int SDLCALL SDL_WM_ToggleFullScreen(SDL_Surface *surface); typedef enum { SDL_GRAB_QUERY = -1, SDL_GRAB_OFF = 0, SDL_GRAB_ON = 1, SDL_GRAB_FULLSCREEN /**< Used internally */ } SDL_GrabMode; /** * This function allows you to set and query the input grab state of * the application. It returns the new input grab state. * * Grabbing means that the mouse is confined to the application window, * and nearly all keyboard input is passed directly to the application, * and not interpreted by a window manager, if any. */ extern DECLSPEC SDL_GrabMode SDLCALL SDL_WM_GrabInput(SDL_GrabMode mode); /*@}*/ /** @internal Not in public API at the moment - do not use! */ extern DECLSPEC int SDLCALL SDL_SoftStretch(SDL_Surface *src, SDL_Rect *srcrect, SDL_Surface *dst, SDL_Rect *dstrect); /* Ends C function definitions when using C++ */ #ifdef __cplusplus } #endif #include "close_code.h" #endif /* _SDL_video_h */