+// changes a cvar and reports it to the server (for the menu to notify the
+// server about changes)
+alias setreport "set \"$1\" \"$2\" ; sendcvar \"$1\""
+
+seta cl_firststart "" "how many times the client has been run"
+seta cl_startcount 0 "how many times the client has been run"
+
+// other aliases
+alias +hook +button6
+alias -hook -button6
+alias +jetpack +button10
+alias -jetpack -button10
+alias +dodge +button11
+alias -dodge -button11
+alias use "impulse 21"
+
+// for backwards compatibility
+// TODO Remove after 0.8 release!
+cl_particles_forcetraileffects 1
+
+alias dropweapon "impulse 17"
+alias +show_info +button7
+alias -show_info -button7
+
+// player defaults
+_cl_color "112.211" // same effect as 112, but menuqc can detect this as the default and not intentionally set
+_cl_name ""
+seta _cl_gender 0 "storage cvar for current player gender (0 = undisclosed, 1 = male, 2 = female)"
+_cl_playermodel models/player/erebus.iqm
+_cl_playerskin 0
+
+seta cl_reticle 1 "enable zoom reticles"
+seta cl_reticle_stretch 0 "stretch reticles so they fit the screen (breaks image proportions)"
+seta cl_reticle_normal 1 "draw an aiming reticle when zooming with the zoom button"
+seta cl_reticle_normal_alpha 1 "alpha of the normal reticle"
+seta cl_reticle_weapon 1 "draw custom aiming reticle when zooming with certain weapons"
+seta cl_reticle_weapon_alpha 1 "alpha of the custom reticle"
+
+fov 100
+seta cl_velocityzoom_enabled 0 "velocity based zooming of fov"
+seta cl_velocityzoom_factor 0 "factor of fov zooming (negative values zoom out)"
+seta cl_velocityzoom_type 3 "how to factor in speed, 1 = all velocity in all directions, 2 = velocity only in forward direction (can be negative), 3 = velocity only in forward direction (limited to forward only)"
+seta cl_velocityzoom_speed 1000 "target speed for fov factoring"
+seta cl_velocityzoom_time 0.2 "time value for averaging speed values"
+seta cl_spawnzoom 1 "zoom effect immediately when a player spawns"
+seta cl_spawnzoom_speed 1 "speed at which zooming occurs while spawning"
+seta cl_spawnzoom_factor 2 "factor of zoom while spawning"
+seta cl_zoomfactor 5 "how much +zoom will zoom (1-30)"
+seta cl_zoomspeed 8 "how fast it will zoom (0.5-16), negative values mean instant zoom"
+seta cl_zoomsensitivity 0 "how zoom changes sensitivity (0 = weakest, 1 = strongest)"
+
+seta cl_unpress_zoom_on_spawn 1 "automatically unpress zoom when you spawn"
+seta cl_unpress_zoom_on_death 1 "automatically unpress zoom when you die (and don't allow zoom again while dead)"
+seta cl_unpress_zoom_on_weapon_switch 1 "automatically unpress zoom when you switch a weapon"
+seta cl_unpress_attack_on_weapon_switch 0 "automatically unpress fire and fire1 attack buttons when you switch a weapon"
+
+seta cl_spawn_event_particles 1 "pointparticles effect whenever a player spawns"
+seta cl_spawn_event_sound 1 "sound effect whenever a player spawns"
+//seta cl_spawn_point_model 0 "place a model at all spawn points" // still needs a model
+seta cl_spawn_point_particles 1 "pointparticles effect at all spawn points" // managed by effects-.cfg files
+seta cl_spawn_point_dist_min 1200
+seta cl_spawn_point_dist_max 1600
+
+freelook 1
+sensitivity 6
+v_gamma 1
+viewsize 100
+bgmvolume 1
+volume 0.5
+// fullscreen 1024x768x32bit
+vid_bitsperpixel 32
+vid_fullscreen 1
+vid_width 1024
+vid_height 768
+vid_pixelheight 1
+vid_resizable 0 // cannot be turned on before it is sure it cannot cause a r_restart
+vid_desktopfullscreen 1
+prvm_language en
+set _menu_prvm_language ""
+set _menu_vid_width "$vid_width"
+set _menu_vid_height "$vid_height"
+set _menu_vid_pixelheight "$vid_pixelheight"
+set _menu_vid_desktopfullscreen "$vid_desktopfullscreen"
+seta menu_vid_scale 0
+seta menu_vid_allowdualscreenresolution 0
+// 2D resolution 800x600
+vid_conwidth 800
+vid_conheight 600
+// menu_conwidth, menu_conheight are set inside quake.rc
+v_deathtilt 0 // needed for spectators (who are dead to avoid prediction)
+
+// we want to use sRGB for our maps!
+exec sRGB-disable.cfg
+vid_sRGB_fallback 2
+r_hdr_glowintensity 1
+// #define Image_LinearFloatFromsRGBFloat(c) (((c) <= 0.04045f) ? (c) * (1.0f / 12.92f) : (float)pow(((c) + 0.055f)*(1.0f/1.055f), 2.4f))
+set rpn_sRGB_to_linear "dup 0.055 add 1.055 div 2.4 pow exch 12.92 div dup 0.0031308 gt when"
+// #define Image_sRGBFloatFromLinearFloat(c) (((c) < 0.0031308f) ? (c) * 12.92f : 1.055f * (float)pow((c), 1.0f/2.4f) - 0.055f)
+set rpn_linear_to_sRGB "dup 1.0 2.4 div pow 1.055 mul 0.055 sub exch 12.92 mul dup 0.04045 ge when"
+
+// -nosRGB to -sRGB sky shader conversion:
+//
+// q3map_sunExt 1 0.6875 0.375 340 25 47 0 16
+// ^^ elevation
+// ^^^ sunlight
+// q3map_skylight 110 3
+// ^^^ skylight
+//
+// With that, do (the last parameter is the ratio of skylight you assume hits
+// the surfaces, about 0.25 for inner surfaces near sky, about 1.00 on
+// terrain):
+// ]skybox_nosRGB_to_sRGB 340 47 110 0.25
+// rpn: still on stack: new_sunlight:
+// rpn: still on stack: 380.464142
+// rpn: still on stack: new_skylight:
+// rpn: still on stack: 9.32523632
+//
+// The equivalent -sRGB shader then will have:
+//
+// q3map_sunExt 1 0.6875 0.375 380.464142 25 47 0 16
+// q3map_skylight 9.32523632 3
+alias skybox_nosRGB_to_sRGB "rpn $3 402.123 $4 div div $rpn_sRGB_to_linear 402.123 $4 div mul /new_skylight: $3 402.123 $4 div div $1 256 div $2 0.017453 mul sin mul add $rpn_sRGB_to_linear $3 402.123 $4 div div $rpn_sRGB_to_linear sub 256 mul $2 0.017453 mul sin div /new_sunlight:"
+
+set cl_orthoview 0 "enable top-down view of the map- meant to be used for radar map images (note: orthoview sets cvars temporarily, requires restart to return them to normal)"
+set cl_orthoview_nofog 1 "disable fog while in orthoview-- note, should not be enabled on ALL maps, i.e. oilrig works fine with this disabled"
+
+// these settings determine how much the view is affected by movement/damage
+cl_smoothviewheight 0.05 // time of the averaging to the viewheight value so that it creates a smooth transition for crouching and such. 0 for instant transition
+cl_deathfade 0 // fade screen to dark red when dead, value represents how fast the fade is (higher is faster)
+cl_bobcycle 0.5 // how long the cycle of up/down view movement takes (only works if cl_bob is not 0), default is 0.6
+cl_bob 0 // how much view moves up/down when moving (does not move if cl_bobcycle is 0, but still enables cl_bobmodel), default is 0.02
+cl_bob2cycle 1 // how long the cycle of left/right view movement takes (only works if cl_bob2 is not 0), default is 0.6
+cl_bob2 0 // how much view moves left/right when moving (does not move if cl_bob2cycle is 0), default is 0.01
+cl_bobfall 0.05 "how much the view swings down when falling (influenced by the speed you hit the ground with)"
+cl_bobfallcycle 3 "speed of the bobfall swing"
+cl_bobfallspeed 200 "necessary amount of speed for bob-falling to occur"
+cl_bobmodel 1 // whether to have gun model move around on screen when moving (only works if cl_bob is not 0), default is 1
+cl_bobmodel_side 0.2 // amount the gun sways to the sides
+cl_bobmodel_speed 10 // rate at which the gun sways
+cl_bobmodel_up 0.1 // amount the gun sways up and down
+
+cl_followmodel 1 // enables weapon pushing / pulling effect when walking
+seta cl_followmodel_speed 0.3 "gun following speed"
+seta cl_followmodel_limit 135 "gun following limit"
+seta cl_followmodel_velocity_absolute 0 "make the effect ignore velocity direction changes (side effect: it causes a glitch when teleporting / passing through a warpzone)"
+seta cl_followmodel_velocity_lowpass 0.05 "gun following velocity lowpass averaging time"
+seta cl_followmodel_highpass 0.05 "gun following highpass averaging time"
+seta cl_followmodel_lowpass 0.03 "gun following lowpass averaging time"
+
+cl_leanmodel 1 // enables weapon leaning effect when looking around
+seta cl_leanmodel_speed 0.3 "gun leaning speed"
+seta cl_leanmodel_limit 30 "gun leaning limit"
+seta cl_leanmodel_highpass1 0.2 "gun leaning pre-highpass averaging time"
+seta cl_leanmodel_highpass 0.2 "gun leaning highpass averaging time"
+seta cl_leanmodel_lowpass 0.05 "gun leaning lowpass averaging time"
+
+cl_rollangle 0 // amount of view tilt when strafing, default is 2.0
+v_kicktime 0 // how long damage kicks of the view last, default is 0 seconds
+gl_polyblend 0 // whether to use screen tints, this has now been replaced by a better system in CSQC
+r_motionblur 0 // motion blur value, default is 0
+r_damageblur 0 // motion blur when damaged, default is 0 (removed in Xonotic)
+
+r_bloom_blur 4
+r_bloom_brighten 2
+r_bloom_colorexponent 1
+r_bloom_colorscale 1
+r_bloom_colorsubtract 0.125
+r_bloom_resolution 320
+r_bloom_scenebrightness 0.85
+
+seta vid_x11_display "" "xonotic-linux-*.sh will use this to start xonotic on an other/new X display"
+// This can have three possible settings:
+// "" run as usual
+// ":n" use DISPLAY=:n, create it if needed
+// ":n/layout" use DISPLAY=:n, create it if needed with ServerLayout layout
+
+cl_autodemo_nameformat demos/%Y-%m-%d_%H-%M
+
+// taunts and voices
+seta cl_autotaunt 0 "automatically taunt enemies when fragging them"
+seta cl_voice_directional 1 "0 = all voices are non-directional, 1 = all voices are directional, 2 = only taunts are directional"
+seta cl_voice_directional_taunt_attenuation 0.5 "this defines the distance from which taunts can be heard"