X-Git-Url: http://git.xonotic.org/?a=blobdiff_plain;f=radiant%2Fwatchbsp.cpp;h=bd7e11ca41f9807c09b997dc9325e590d165493b;hb=733ec8a931094f120a9923882b0eb592c45595fc;hp=45e817d84e6da1998be6c22b0e8e38ffbf7adf12;hpb=2b0e61ede1d5e755dc5e3920028f24b817d8dcdf;p=xonotic%2Fnetradiant.git diff --git a/radiant/watchbsp.cpp b/radiant/watchbsp.cpp index 45e817d8..bd7e11ca 100644 --- a/radiant/watchbsp.cpp +++ b/radiant/watchbsp.cpp @@ -1,32 +1,32 @@ /* -Copyright (c) 2001, Loki software, inc. -All rights reserved. - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -Redistributions of source code must retain the above copyright notice, this list -of conditions and the following disclaimer. - -Redistributions in binary form must reproduce the above copyright notice, this -list of conditions and the following disclaimer in the documentation and/or -other materials provided with the distribution. - -Neither the name of Loki software nor the names of its contributors may be used -to endorse or promote products derived from this software without specific prior -written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY -DIRECT,INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ + Copyright (c) 2001, Loki software, inc. + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, + are permitted provided that the following conditions are met: + + Redistributions of source code must retain the above copyright notice, this list + of conditions and the following disclaimer. + + Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. + + Neither the name of Loki software nor the names of its contributors may be used + to endorse or promote products derived from this software without specific prior + written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY + DIRECT,INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ //----------------------------------------------------------------------------- // @@ -36,7 +36,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #include "watchbsp.h" #include -#include +#include #include "cmdlib.h" #include "convert.h" @@ -52,557 +52,511 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #include "mainframe.h" #include "sockets.h" -void message_flush(message_info_t* self) -{ - Sys_Print(self->msg_level, self->m_buffer, self->m_length); - self->m_length = 0; +void message_flush( message_info_t* self ){ + Sys_Print( self->msg_level, self->m_buffer, self->m_length ); + self->m_length = 0; } -void message_print(message_info_t* self, const char* characters, std::size_t length) -{ - const char* end = characters + length; - while(characters != end) - { - std::size_t space = message_info_t::bufsize - 1 - self->m_length; - if(space == 0) - { - message_flush(self); - } - else - { - std::size_t size = std::min(space, std::size_t(end - characters)); - memcpy(self->m_buffer + self->m_length, characters, size); - self->m_length += size; - characters += size; - } - } +void message_print( message_info_t* self, const char* characters, std::size_t length ){ + const char* end = characters + length; + while ( characters != end ) + { + std::size_t space = message_info_t::bufsize - 1 - self->m_length; + if ( space == 0 ) { + message_flush( self ); + } + else + { + std::size_t size = std::min( space, std::size_t( end - characters ) ); + memcpy( self->m_buffer + self->m_length, characters, size ); + self->m_length += size; + characters += size; + } + } } -#include -#include +#include +#include #include "xmlstuff.h" class CWatchBSP { private: - // a flag we have set to true when using an external BSP plugin - // the resulting code with that is a bit dirty, cleaner solution would be to seperate the succession of commands from the listening loop - // (in two seperate classes probably) - bool m_bBSPPlugin; - - // EIdle: we are not listening - // DoMonitoringLoop will change state to EBeginStep - // EBeginStep: the socket is up for listening, we are expecting incoming connection - // incoming connection will change state to EWatching - // EWatching: we have a connection, monitor it - // connection closed will see if we start a new step (EBeginStep) or launch Quake3 and end (EIdle) - enum EWatchBSPState { EIdle, EBeginStep, EWatching } m_eState; - socket_t *m_pListenSocket; - socket_t *m_pInSocket; - netmessage_t msg; - GPtrArray *m_pCmd; - // used to timeout EBeginStep - GTimer *m_pTimer; - std::size_t m_iCurrentStep; - // name of the map so we can run the engine - char *m_sBSPName; - // buffer we use in push mode to receive data directly from the network - xmlParserInputBufferPtr m_xmlInputBuffer; - xmlParserInputPtr m_xmlInput; - xmlParserCtxtPtr m_xmlParserCtxt; - // call this to switch the set listening mode - bool SetupListening(); - // start a new EBeginStep - void DoEBeginStep(); - // the xml and sax parser state - char m_xmlBuf[MAX_NETMESSAGE]; - bool m_bNeedCtxtInit; - message_info_t m_message_info; + // a flag we have set to true when using an external BSP plugin + // the resulting code with that is a bit dirty, cleaner solution would be to seperate the succession of commands from the listening loop + // (in two seperate classes probably) + bool m_bBSPPlugin; + + // EIdle: we are not listening + // DoMonitoringLoop will change state to EBeginStep + // EBeginStep: the socket is up for listening, we are expecting incoming connection + // incoming connection will change state to EWatching + // EWatching: we have a connection, monitor it + // connection closed will see if we start a new step (EBeginStep) or launch Quake3 and end (EIdle) + enum EWatchBSPState { EIdle, EBeginStep, EWatching } m_eState; + socket_t *m_pListenSocket; + socket_t *m_pInSocket; + netmessage_t msg; + GPtrArray *m_pCmd; + // used to timeout EBeginStep + GTimer *m_pTimer; + std::size_t m_iCurrentStep; + // name of the map so we can run the engine + char *m_sBSPName; + // buffer we use in push mode to receive data directly from the network + xmlParserInputBufferPtr m_xmlInputBuffer; + xmlParserInputPtr m_xmlInput; + xmlParserCtxtPtr m_xmlParserCtxt; + // call this to switch the set listening mode + bool SetupListening(); + // start a new EBeginStep + void DoEBeginStep(); + // the xml and sax parser state + char m_xmlBuf[MAX_NETMESSAGE]; + bool m_bNeedCtxtInit; + message_info_t m_message_info; public: - CWatchBSP() - { - m_pCmd = 0; - m_bBSPPlugin = false; - m_pListenSocket = NULL; - m_pInSocket = NULL; - m_eState = EIdle; - m_pTimer = g_timer_new(); - m_sBSPName = NULL; - m_xmlInputBuffer = NULL; - m_bNeedCtxtInit = true; - } - virtual ~CWatchBSP() - { - EndMonitoringLoop(); - Net_Shutdown(); - - g_timer_destroy(m_pTimer); - } - - bool HasBSPPlugin() const - { return m_bBSPPlugin; } - - // called regularly to keep listening - void RoutineProcessing(); - // start a monitoring loop with the following steps - void DoMonitoringLoop( GPtrArray *pCmd, const char *sBSPName ); - void EndMonitoringLoop() - { - Reset(); - if (m_sBSPName) - { - string_release(m_sBSPName, string_length(m_sBSPName)); - m_sBSPName = 0; - } - if(m_pCmd) - { - g_ptr_array_free(m_pCmd, TRUE); - m_pCmd = 0; - } - } - // close everything - may be called from the outside to abort the process - void Reset(); - // start a listening loop for an external process, possibly a BSP plugin - void ExternalListen(); + CWatchBSP(){ + m_pCmd = 0; + m_bBSPPlugin = false; + m_pListenSocket = NULL; + m_pInSocket = NULL; + m_eState = EIdle; + m_pTimer = g_timer_new(); + m_sBSPName = NULL; + m_xmlInputBuffer = NULL; + m_bNeedCtxtInit = true; + } + virtual ~CWatchBSP(){ + EndMonitoringLoop(); + Net_Shutdown(); + + g_timer_destroy( m_pTimer ); + } + + bool HasBSPPlugin() const + { return m_bBSPPlugin; } + + // called regularly to keep listening + void RoutineProcessing(); + // start a monitoring loop with the following steps + void DoMonitoringLoop( GPtrArray *pCmd, const char *sBSPName ); + void EndMonitoringLoop(){ + Reset(); + if ( m_sBSPName ) { + string_release( m_sBSPName, string_length( m_sBSPName ) ); + m_sBSPName = 0; + } + if ( m_pCmd ) { + g_ptr_array_free( m_pCmd, TRUE ); + m_pCmd = 0; + } + } + // close everything - may be called from the outside to abort the process + void Reset(); + // start a listening loop for an external process, possibly a BSP plugin + void ExternalListen(); }; CWatchBSP* g_pWatchBSP; - // watch the BSP process through network connections - // true: trigger the BSP steps one by one and monitor them through the network - // false: create a BAT / .sh file and execute it. don't bother monitoring it. +// watch the BSP process through network connections +// true: trigger the BSP steps one by one and monitor them through the network +// false: create a BAT / .sh file and execute it. don't bother monitoring it. bool g_WatchBSP_Enabled = true; - // do we stop the compilation process if we come accross a leak? +// do we stop the compilation process if we come accross a leak? bool g_WatchBSP_LeakStop = true; bool g_WatchBSP_RunQuake = false; - // store prefs setting for automatic sleep mode activation +// store prefs setting for automatic sleep mode activation bool g_WatchBSP_DoSleep = true; - // timeout when beginning a step (in seconds) - // if we don't get a connection quick enough we assume something failed and go back to idling +// timeout when beginning a step (in seconds) +// if we don't get a connection quick enough we assume something failed and go back to idling int g_WatchBSP_Timeout = 10; -void Build_constructPreferences(PreferencesPage& page) -{ - GtkWidget* monitorbsp = page.appendCheckBox("", "Enable Build Process Monitoring", g_WatchBSP_Enabled); - GtkWidget* leakstop = page.appendCheckBox("", "Stop Compilation on Leak", g_WatchBSP_LeakStop); - GtkWidget* runengine = page.appendCheckBox("", "Run Engine After Compile", g_WatchBSP_RunQuake); - GtkWidget* sleep = page.appendCheckBox("", "Sleep When Running the Engine", g_WatchBSP_DoSleep); - Widget_connectToggleDependency(leakstop, monitorbsp); - Widget_connectToggleDependency(runengine, monitorbsp); - Widget_connectToggleDependency(sleep, runengine); +void Build_constructPreferences( PreferencesPage& page ){ + ui::CheckButton monitorbsp = page.appendCheckBox( "", "Enable Build Process Monitoring", g_WatchBSP_Enabled ); + ui::CheckButton leakstop = page.appendCheckBox( "", "Stop Compilation on Leak", g_WatchBSP_LeakStop ); + ui::CheckButton runengine = page.appendCheckBox( "", "Run Engine After Compile", g_WatchBSP_RunQuake ); + ui::CheckButton sleep = page.appendCheckBox ( "", "Sleep When Running the Engine", g_WatchBSP_DoSleep ); + Widget_connectToggleDependency( leakstop, monitorbsp ); + Widget_connectToggleDependency( runengine, monitorbsp ); + Widget_connectToggleDependency( sleep, runengine ); } -void Build_constructPage(PreferenceGroup& group) -{ - PreferencesPage page(group.createPage("Build", "Build Preferences")); - Build_constructPreferences(page); +void Build_constructPage( PreferenceGroup& group ){ + PreferencesPage page( group.createPage( "Build", "Build Preferences" ) ); + Build_constructPreferences( page ); } -void Build_registerPreferencesPage() -{ - PreferencesDialog_addSettingsPage(FreeCaller1()); +void Build_registerPreferencesPage(){ + PreferencesDialog_addSettingsPage( FreeCaller1() ); } #include "preferencesystem.h" #include "stringio.h" -void BuildMonitor_Construct() -{ - g_pWatchBSP = new CWatchBSP(); +void BuildMonitor_Construct(){ + g_pWatchBSP = new CWatchBSP(); - g_WatchBSP_Enabled = !string_equal(g_pGameDescription->getKeyValue("no_bsp_monitor"), "1"); + g_WatchBSP_Enabled = !string_equal( g_pGameDescription->getKeyValue( "no_bsp_monitor" ), "1" ); - GlobalPreferenceSystem().registerPreference("WatchBSP", BoolImportStringCaller(g_WatchBSP_Enabled), BoolExportStringCaller(g_WatchBSP_Enabled)); - GlobalPreferenceSystem().registerPreference("RunQuake2Run", BoolImportStringCaller(g_WatchBSP_RunQuake), BoolExportStringCaller(g_WatchBSP_RunQuake)); - GlobalPreferenceSystem().registerPreference("LeakStop", BoolImportStringCaller(g_WatchBSP_LeakStop), BoolExportStringCaller(g_WatchBSP_LeakStop)); - GlobalPreferenceSystem().registerPreference("SleepMode", BoolImportStringCaller(g_WatchBSP_DoSleep), BoolExportStringCaller(g_WatchBSP_DoSleep)); + GlobalPreferenceSystem().registerPreference( "WatchBSP", BoolImportStringCaller( g_WatchBSP_Enabled ), BoolExportStringCaller( g_WatchBSP_Enabled ) ); + GlobalPreferenceSystem().registerPreference( "RunQuake2Run", BoolImportStringCaller( g_WatchBSP_RunQuake ), BoolExportStringCaller( g_WatchBSP_RunQuake ) ); + GlobalPreferenceSystem().registerPreference( "LeakStop", BoolImportStringCaller( g_WatchBSP_LeakStop ), BoolExportStringCaller( g_WatchBSP_LeakStop ) ); + GlobalPreferenceSystem().registerPreference( "SleepMode", BoolImportStringCaller( g_WatchBSP_DoSleep ), BoolExportStringCaller( g_WatchBSP_DoSleep ) ); - Build_registerPreferencesPage(); + Build_registerPreferencesPage(); } -void BuildMonitor_Destroy() -{ - delete g_pWatchBSP; +void BuildMonitor_Destroy(){ + delete g_pWatchBSP; + g_pWatchBSP = nullptr; } -CWatchBSP *GetWatchBSP() -{ - return g_pWatchBSP; +CWatchBSP *GetWatchBSP(){ + return g_pWatchBSP; } -void BuildMonitor_Run(GPtrArray* commands, const char* mapName) -{ - GetWatchBSP()->DoMonitoringLoop(commands, mapName); +void BuildMonitor_Run( GPtrArray* commands, const char* mapName ){ + GetWatchBSP()->DoMonitoringLoop( commands, mapName ); } // Static functions for the SAX callbacks ------------------------------------------------------- // utility for saxStartElement below -static void abortStream(message_info_t *data) -{ - GetWatchBSP()->EndMonitoringLoop(); - // tell there has been an error +static void abortStream( message_info_t *data ){ + GetWatchBSP()->EndMonitoringLoop(); + // tell there has been an error #if 0 - if (GetWatchBSP()->HasBSPPlugin()) - g_BSPFrontendTable.m_pfnEndListen(2); + if ( GetWatchBSP()->HasBSPPlugin() ) { + g_BSPFrontendTable.m_pfnEndListen( 2 ); + } #endif - // yeah this doesn't look good.. but it's needed so that everything will be ignored until the stream goes out - data->ignore_depth = -1; - data->recurse++; + // yeah this doesn't look good.. but it's needed so that everything will be ignored until the stream goes out + data->ignore_depth = -1; + data->recurse++; } #include "stream_version.h" -static void saxStartElement(message_info_t *data, const xmlChar *name, const xmlChar **attrs) -{ +static void saxStartElement( message_info_t *data, const xmlChar *name, const xmlChar **attrs ){ #if 0 - globalOutputStream() << "<" << name; - if(attrs != 0) - { - for(const xmlChar** p = attrs; *p != 0; p += 2) - { - globalOutputStream() << " " << p[0] << "=" << makeQuoted(p[1]); - } - } - globalOutputStream() << ">\n"; + globalOutputStream() << "<" << name; + if ( attrs != 0 ) { + for ( const xmlChar** p = attrs; *p != 0; p += 2 ) + { + globalOutputStream() << " " << p[0] << "=" << makeQuoted( p[1] ); + } + } + globalOutputStream() << ">\n"; #endif - if (data->ignore_depth == 0) - { - if(data->pGeometry != 0) - // we have a handler - { - data->pGeometry->saxStartElement (data, name, attrs); - } - else - { - if (strcmp(reinterpret_cast(name), "q3map_feedback") == 0) - { - // check the correct version - // old q3map don't send a version attribute - // the ones we support .. send Q3MAP_STREAM_VERSION - if (!attrs[0] || !attrs[1] || (strcmp(reinterpret_cast(attrs[0]), "version") != 0)) - { - message_flush(data); - globalErrorStream() << "No stream version given in the feedback stream, this is an old q3map version.\n" - "Please turn off monitored compiling if you still wish to use this q3map executable\n"; - abortStream(data); - return; - } - else if (strcmp(reinterpret_cast(attrs[1]), Q3MAP_STREAM_VERSION) != 0) - { - message_flush(data); - globalErrorStream() << - "This version of Radiant reads version " Q3MAP_STREAM_VERSION " debug streams, I got an incoming connection with version " << reinterpret_cast(attrs[1]) << "\n" - "Please make sure your versions of Radiant and q3map are matching.\n"; - abortStream(data); - return; - } - } - // we don't treat locally - else if (strcmp(reinterpret_cast(name), "message") == 0) - { - int msg_level = atoi(reinterpret_cast(attrs[1])); - if(msg_level != data->msg_level) - { - message_flush(data); - data->msg_level = msg_level; - } - } - else if (strcmp(reinterpret_cast(name), "polyline") == 0) - // polyline has a particular status .. right now we only use it for leakfile .. - { - data->geometry_depth = data->recurse; - data->pGeometry = &g_pointfile; - data->pGeometry->saxStartElement (data, name, attrs); - } - else if (strcmp(reinterpret_cast(name), "select") == 0) - { - CSelectMsg *pSelect = new CSelectMsg(); - data->geometry_depth = data->recurse; - data->pGeometry = pSelect; - data->pGeometry->saxStartElement (data, name, attrs); - } - else if (strcmp(reinterpret_cast(name), "pointmsg") == 0) - { - CPointMsg *pPoint = new CPointMsg(); - data->geometry_depth = data->recurse; - data->pGeometry = pPoint; - data->pGeometry->saxStartElement (data, name, attrs); - } - else if (strcmp(reinterpret_cast(name), "windingmsg") == 0) - { - CWindingMsg *pWinding = new CWindingMsg(); - data->geometry_depth = data->recurse; - data->pGeometry = pWinding; - data->pGeometry->saxStartElement (data, name, attrs); - } - else - { - globalErrorStream() << "Warning: ignoring unrecognized node in XML stream (" << reinterpret_cast(name) << ")\n"; - // we don't recognize this node, jump over it - // (NOTE: the ignore mechanism is a bit screwed, only works when starting an ignore at the highest level) - data->ignore_depth = data->recurse; - } - } - } - data->recurse++; + if ( data->ignore_depth == 0 ) { + if ( data->pGeometry != 0 ) { + // we have a handler + data->pGeometry->saxStartElement( data, name, attrs ); + } + else + { + if ( strcmp( reinterpret_cast( name ), "q3map_feedback" ) == 0 ) { + // check the correct version + // old q3map don't send a version attribute + // the ones we support .. send Q3MAP_STREAM_VERSION + if ( !attrs[0] || !attrs[1] || ( strcmp( reinterpret_cast( attrs[0] ), "version" ) != 0 ) ) { + message_flush( data ); + globalErrorStream() << "No stream version given in the feedback stream, this is an old q3map version.\n" + "Please turn off monitored compiling if you still wish to use this q3map executable\n"; + abortStream( data ); + return; + } + else if ( q3map::stream_version() != reinterpret_cast( attrs[1] ) ) { + message_flush( data ); + globalErrorStream() << "This version of Radiant reads version " + << q3map::stream_version() + << " debug streams, I got an incoming connection with version " + << reinterpret_cast( attrs[1] ) + << "\nPlease make sure your versions of Radiant and q3map are matching.\n"; + abortStream( data ); + return; + } + } + // we don't treat locally + else if ( strcmp( reinterpret_cast( name ), "message" ) == 0 ) { + int msg_level = atoi( reinterpret_cast( attrs[1] ) ); + if ( msg_level != data->msg_level ) { + message_flush( data ); + data->msg_level = msg_level; + } + } + else if ( strcmp( reinterpret_cast( name ), "polyline" ) == 0 ) { + // polyline has a particular status .. right now we only use it for leakfile .. + data->geometry_depth = data->recurse; + data->pGeometry = &g_pointfile; + data->pGeometry->saxStartElement( data, name, attrs ); + } + else if ( strcmp( reinterpret_cast( name ), "select" ) == 0 ) { + CSelectMsg *pSelect = new CSelectMsg(); + data->geometry_depth = data->recurse; + data->pGeometry = pSelect; + data->pGeometry->saxStartElement( data, name, attrs ); + } + else if ( strcmp( reinterpret_cast( name ), "pointmsg" ) == 0 ) { + CPointMsg *pPoint = new CPointMsg(); + data->geometry_depth = data->recurse; + data->pGeometry = pPoint; + data->pGeometry->saxStartElement( data, name, attrs ); + } + else if ( strcmp( reinterpret_cast( name ), "windingmsg" ) == 0 ) { + CWindingMsg *pWinding = new CWindingMsg(); + data->geometry_depth = data->recurse; + data->pGeometry = pWinding; + data->pGeometry->saxStartElement( data, name, attrs ); + } + else + { + globalErrorStream() << "Warning: ignoring unrecognized node in XML stream (" << reinterpret_cast( name ) << ")\n"; + // we don't recognize this node, jump over it + // (NOTE: the ignore mechanism is a bit screwed, only works when starting an ignore at the highest level) + data->ignore_depth = data->recurse; + } + } + } + data->recurse++; } -static void saxEndElement(message_info_t *data, const xmlChar *name) -{ +static void saxEndElement( message_info_t *data, const xmlChar *name ){ #if 0 - globalOutputStream() << "<" << name << "/>\n"; + globalOutputStream() << "<" << name << "/>\n"; #endif - data->recurse--; - // we are out of an ignored chunk - if(data->recurse == data->ignore_depth) - { - data->ignore_depth = 0; - return; - } - if(data->pGeometry != 0) - { - data->pGeometry->saxEndElement (data, name); - // we add the object to the debug window - if(data->geometry_depth == data->recurse) - { - g_DbgDlg.Push(data->pGeometry); - data->pGeometry = 0; - } - } - if (data->recurse == data->stop_depth) - { - message_flush(data); + data->recurse--; + // we are out of an ignored chunk + if ( data->recurse == data->ignore_depth ) { + data->ignore_depth = 0; + return; + } + if ( data->pGeometry != 0 ) { + data->pGeometry->saxEndElement( data, name ); + // we add the object to the debug window + if ( data->geometry_depth == data->recurse ) { + g_DbgDlg.Push( data->pGeometry ); + data->pGeometry = 0; + } + } + if ( data->recurse == data->stop_depth ) { + message_flush( data ); #ifdef _DEBUG - globalOutputStream() << "Received error msg .. shutting down..\n"; + globalOutputStream() << "Received error msg .. shutting down..\n"; #endif - GetWatchBSP()->EndMonitoringLoop(); - // tell there has been an error + GetWatchBSP()->EndMonitoringLoop(); + // tell there has been an error #if 0 - if (GetWatchBSP()->HasBSPPlugin()) - g_BSPFrontendTable.m_pfnEndListen(2); + if ( GetWatchBSP()->HasBSPPlugin() ) { + g_BSPFrontendTable.m_pfnEndListen( 2 ); + } #endif - return; - } + return; + } } class MessageOutputStream : public TextOutputStream { - message_info_t* m_data; + message_info_t* m_data; public: - MessageOutputStream(message_info_t* data) : m_data(data) - { - } - std::size_t write(const char* buffer, std::size_t length) - { - if(m_data->pGeometry != 0) - { - m_data->pGeometry->saxCharacters(m_data, reinterpret_cast(buffer), int(length)); - } - else - { - if (m_data->ignore_depth == 0) - { - // output the message using the level - message_print(m_data, buffer, length); - // if this message has error level flag, we mark the depth to stop the compilation when we get out - // we don't set the msg level if we don't stop on leak - if (m_data->msg_level == 3) - { - m_data->stop_depth = m_data->recurse-1; - } - } - } - - return length; - } + MessageOutputStream( message_info_t* data ) : m_data( data ){ + } + + std::size_t write( const char* buffer, std::size_t length ){ + if ( m_data->pGeometry != 0 ) { + m_data->pGeometry->saxCharacters( m_data, reinterpret_cast( buffer ), int(length) ); + } + else + { + if ( m_data->ignore_depth == 0 ) { + // output the message using the level + message_print( m_data, buffer, length ); + // if this message has error level flag, we mark the depth to stop the compilation when we get out + // we don't set the msg level if we don't stop on leak + if ( m_data->msg_level == 3 ) { + m_data->stop_depth = m_data->recurse - 1; + } + } + } + + return length; + } }; template -inline MessageOutputStream& operator<<(MessageOutputStream& ostream, const T& t) -{ - return ostream_write(ostream, t); +inline MessageOutputStream& operator<<( MessageOutputStream& ostream, const T& t ){ + return ostream_write( ostream, t ); } -static void saxCharacters(message_info_t *data, const xmlChar *ch, int len) -{ - MessageOutputStream ostream(data); - ostream << StringRange(reinterpret_cast(ch), reinterpret_cast(ch + len)); +static void saxCharacters( message_info_t *data, const xmlChar *ch, int len ){ + MessageOutputStream ostream( data ); + ostream << StringRange( reinterpret_cast( ch ), reinterpret_cast( ch + len ) ); } -static void saxComment(void *ctx, const xmlChar *msg) -{ - globalOutputStream() << "XML comment: " << reinterpret_cast(msg) << "\n"; +static void saxComment( void *ctx, const xmlChar *msg ){ + globalOutputStream() << "XML comment: " << reinterpret_cast( msg ) << "\n"; } -static void saxWarning(void *ctx, const char *msg, ...) -{ - char saxMsgBuffer[4096]; - va_list args; - - va_start(args, msg); - vsprintf (saxMsgBuffer, msg, args); - va_end(args); - globalOutputStream() << "XML warning: " << saxMsgBuffer << "\n"; +static void saxWarning( void *ctx, const char *msg, ... ){ + char saxMsgBuffer[4096]; + va_list args; + + va_start( args, msg ); + vsprintf( saxMsgBuffer, msg, args ); + va_end( args ); + globalOutputStream() << "XML warning: " << saxMsgBuffer << "\n"; } -static void saxError(void *ctx, const char *msg, ...) -{ - char saxMsgBuffer[4096]; - va_list args; - - va_start(args, msg); - vsprintf (saxMsgBuffer, msg, args); - va_end(args); - globalErrorStream() << "XML error: " << saxMsgBuffer << "\n"; +static void saxError( void *ctx, const char *msg, ... ){ + char saxMsgBuffer[4096]; + va_list args; + + va_start( args, msg ); + vsprintf( saxMsgBuffer, msg, args ); + va_end( args ); + globalErrorStream() << "XML error: " << saxMsgBuffer << "\n"; } -static void saxFatal(void *ctx, const char *msg, ...) -{ - char buffer[4096]; - - va_list args; - - va_start(args, msg); - vsprintf (buffer, msg, args); - va_end(args); - globalErrorStream() << "XML fatal error: " << buffer << "\n"; +static void saxFatal( void *ctx, const char *msg, ... ){ + char buffer[4096]; + + va_list args; + + va_start( args, msg ); + vsprintf( buffer, msg, args ); + va_end( args ); + globalErrorStream() << "XML fatal error: " << buffer << "\n"; } static xmlSAXHandler saxParser = { - 0, /* internalSubset */ - 0, /* isStandalone */ - 0, /* hasInternalSubset */ - 0, /* hasExternalSubset */ - 0, /* resolveEntity */ - 0, /* getEntity */ - 0, /* entityDecl */ - 0, /* notationDecl */ - 0, /* attributeDecl */ - 0, /* elementDecl */ - 0, /* unparsedEntityDecl */ - 0, /* setDocumentLocator */ - 0, /* startDocument */ - 0, /* endDocument */ - (startElementSAXFunc)saxStartElement, /* startElement */ - (endElementSAXFunc)saxEndElement, /* endElement */ - 0, /* reference */ - (charactersSAXFunc)saxCharacters, /* characters */ - 0, /* ignorableWhitespace */ - 0, /* processingInstruction */ - (commentSAXFunc)saxComment, /* comment */ - (warningSAXFunc)saxWarning, /* warning */ - (errorSAXFunc)saxError, /* error */ - (fatalErrorSAXFunc)saxFatal, /* fatalError */ - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0 + 0, /* internalSubset */ + 0, /* isStandalone */ + 0, /* hasInternalSubset */ + 0, /* hasExternalSubset */ + 0, /* resolveEntity */ + 0, /* getEntity */ + 0, /* entityDecl */ + 0, /* notationDecl */ + 0, /* attributeDecl */ + 0, /* elementDecl */ + 0, /* unparsedEntityDecl */ + 0, /* setDocumentLocator */ + 0, /* startDocument */ + 0, /* endDocument */ + (startElementSAXFunc)saxStartElement, /* startElement */ + (endElementSAXFunc)saxEndElement, /* endElement */ + 0, /* reference */ + (charactersSAXFunc)saxCharacters, /* characters */ + 0, /* ignorableWhitespace */ + 0, /* processingInstruction */ + (commentSAXFunc)saxComment, /* comment */ + (warningSAXFunc)saxWarning, /* warning */ + (errorSAXFunc)saxError, /* error */ + (fatalErrorSAXFunc)saxFatal, /* fatalError */ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0 }; // ------------------------------------------------------------------------------------------------ guint s_routine_id; -static gint watchbsp_routine(gpointer data) -{ - reinterpret_cast(data)->RoutineProcessing(); - return TRUE; +static gint watchbsp_routine( gpointer data ){ + reinterpret_cast( data )->RoutineProcessing(); + return TRUE; } -void CWatchBSP::Reset() -{ - if (m_pInSocket) - { - Net_Disconnect(m_pInSocket); - m_pInSocket = NULL; - } - if (m_pListenSocket) - { - Net_Disconnect(m_pListenSocket); - m_pListenSocket = NULL; - } - if (m_xmlInputBuffer) - { - xmlFreeParserInputBuffer (m_xmlInputBuffer); - m_xmlInputBuffer = NULL; - } - m_eState = EIdle; - if (s_routine_id) - gtk_timeout_remove(s_routine_id); +void CWatchBSP::Reset(){ + if ( m_pInSocket ) { + Net_Disconnect( m_pInSocket ); + m_pInSocket = NULL; + } + if ( m_pListenSocket ) { + Net_Disconnect( m_pListenSocket ); + m_pListenSocket = NULL; + } + if ( m_xmlInputBuffer ) { + xmlFreeParserInputBuffer( m_xmlInputBuffer ); + m_xmlInputBuffer = NULL; + } + m_eState = EIdle; + if ( s_routine_id ) { + gtk_timeout_remove( s_routine_id ); + s_routine_id = 0; + } } -bool CWatchBSP::SetupListening() -{ +bool CWatchBSP::SetupListening(){ #ifdef _DEBUG - if (m_pListenSocket) - { - globalOutputStream() << "ERROR: m_pListenSocket != NULL in CWatchBSP::SetupListening\n"; - return false; - } + if ( m_pListenSocket ) { + globalOutputStream() << "ERROR: m_pListenSocket != NULL in CWatchBSP::SetupListening\n"; + return false; + } #endif - globalOutputStream() << "Setting up\n"; + globalOutputStream() << "Setting up\n"; Net_Setup(); - m_pListenSocket = Net_ListenSocket(39000); - if (m_pListenSocket == NULL) - return false; - globalOutputStream() << "Listening...\n"; - return true; + m_pListenSocket = Net_ListenSocket( 39000 ); + if ( m_pListenSocket == NULL ) { + return false; + } + globalOutputStream() << "Listening...\n"; + return true; } -void CWatchBSP::DoEBeginStep() -{ - Reset(); - if (SetupListening() == false) - { - const char* msg = "Failed to get a listening socket on port 39000.\nTry running with Build monitoring disabled if you can't fix this.\n"; - globalOutputStream() << msg; - gtk_MessageBox(GTK_WIDGET(MainFrame_getWindow()), msg, "Build monitoring", eMB_OK, eMB_ICONERROR); - return; - } - // set the timer for timeouts and step cancellation - g_timer_reset( m_pTimer ); - g_timer_start( m_pTimer ); - - if (!m_bBSPPlugin) - { - globalOutputStream() << "=== running build command ===\n" - << static_cast(g_ptr_array_index( m_pCmd, m_iCurrentStep )) << "\n"; - - if (!Q_Exec(NULL, (char *)g_ptr_array_index( m_pCmd, m_iCurrentStep ), NULL, true, false )) - { - StringOutputStream msg(256); - msg << "Failed to execute the following command: "; - msg << reinterpret_cast(g_ptr_array_index(m_pCmd, m_iCurrentStep)); - msg << "\nCheck that the file exists and that you don't run out of system resources.\n"; - globalOutputStream() << msg.c_str(); - gtk_MessageBox(GTK_WIDGET(MainFrame_getWindow()), msg.c_str(), "Build monitoring", eMB_OK, eMB_ICONERROR ); - return; - } - // re-initialise the debug window - if (m_iCurrentStep == 0) - g_DbgDlg.Init(); - } - m_eState = EBeginStep; - s_routine_id = gtk_timeout_add(25, watchbsp_routine, this); +void CWatchBSP::DoEBeginStep(){ + Reset(); + if ( SetupListening() == false ) { + const char* msg = "Failed to get a listening socket on port 39000.\nTry running with Build monitoring disabled if you can't fix this.\n"; + globalOutputStream() << msg; + MainFrame_getWindow().alert( msg, "Build monitoring", ui::alert_type::OK, ui::alert_icon::ERROR ); + return; + } + // set the timer for timeouts and step cancellation + g_timer_reset( m_pTimer ); + g_timer_start( m_pTimer ); + + if ( !m_bBSPPlugin ) { + globalOutputStream() << "=== running build command ===\n" + << static_cast( g_ptr_array_index( m_pCmd, m_iCurrentStep ) ) << "\n"; + + if ( !Q_Exec( NULL, (char *)g_ptr_array_index( m_pCmd, m_iCurrentStep ), NULL, true, false ) ) { + StringOutputStream msg( 256 ); + msg << "Failed to execute the following command: "; + msg << reinterpret_cast( g_ptr_array_index( m_pCmd, m_iCurrentStep ) ); + msg << "\nCheck that the file exists and that you don't run out of system resources.\n"; + globalOutputStream() << msg.c_str(); + MainFrame_getWindow().alert( msg.c_str(), "Build monitoring", ui::alert_type::OK, ui::alert_icon::ERROR ); + return; + } + // re-initialise the debug window + if ( m_iCurrentStep == 0 ) { + g_DbgDlg.Init(); + } + } + m_eState = EBeginStep; + s_routine_id = gtk_timeout_add( 25, watchbsp_routine, this ); } -#if defined(WIN32) +#if defined( WIN32 ) #define ENGINE_ATTRIBUTE "engine_win32" #define MP_ENGINE_ATTRIBUTE "mp_engine_win32" -#elif defined(__linux__) || defined (__FreeBSD__) +#elif defined( __linux__ ) || defined ( __FreeBSD__ ) #define ENGINE_ATTRIBUTE "engine_linux" #define MP_ENGINE_ATTRIBUTE "mp_engine_linux" -#elif defined(__APPLE__) +#elif defined( __APPLE__ ) #define ENGINE_ATTRIBUTE "engine_macos" #define MP_ENGINE_ATTRIBUTE "mp_engine_macos" #else @@ -612,268 +566,238 @@ void CWatchBSP::DoEBeginStep() class RunEngineConfiguration { public: - const char* executable; - const char* mp_executable; - bool do_sp_mp; - - RunEngineConfiguration() : - executable(g_pGameDescription->getRequiredKeyValue(ENGINE_ATTRIBUTE)), - mp_executable(g_pGameDescription->getKeyValue(MP_ENGINE_ATTRIBUTE)) - { - do_sp_mp = !string_empty(mp_executable); - } + const char* executable; + const char* mp_executable; + bool do_sp_mp; + + RunEngineConfiguration() : + executable( g_pGameDescription->getRequiredKeyValue( ENGINE_ATTRIBUTE ) ), + mp_executable( g_pGameDescription->getKeyValue( MP_ENGINE_ATTRIBUTE ) ){ + do_sp_mp = !string_empty( mp_executable ); + } }; -inline void GlobalGameDescription_string_write_mapparameter(StringOutputStream& string, const char* mapname) -{ - if(g_pGameDescription->mGameType == "q2" - || g_pGameDescription->mGameType == "heretic2") - { - string << ". +exec radiant.cfg +map " << mapname; - } - else - { - string << "+set sv_pure 0 "; - // TTimo: a check for vm_* but that's all fine - //cmdline = "+set sv_pure 0 +set vm_ui 0 +set vm_cgame 0 +set vm_game 0 "; - const char* fs_game = gamename_get(); - if (!string_equal(fs_game, basegame_get())) - { - string << "+set fs_game " << fs_game << " "; - } - if(g_pGameDescription->mGameType == "wolf") - //|| g_pGameDescription->mGameType == "et") - { - if (string_equal(gamemode_get(), "mp")) - { - // MP - string << "+devmap " << mapname; - } - else - { - // SP - string << "+set nextmap \"spdevmap " << mapname << "\""; - } - } - else - { - string << "+devmap " << mapname; - } - } +inline void GlobalGameDescription_string_write_mapparameter( StringOutputStream& string, const char* mapname ){ + if ( g_pGameDescription->mGameType == "q2" + || g_pGameDescription->mGameType == "heretic2" ) { + string << ". +exec radiant.cfg +map " << mapname; + } + else + { + string << "+set sv_pure 0 "; + // TTimo: a check for vm_* but that's all fine + //cmdline = "+set sv_pure 0 +set vm_ui 0 +set vm_cgame 0 +set vm_game 0 "; + const char* fs_game = gamename_get(); + if ( !string_equal( fs_game, basegame_get() ) ) { + string << "+set fs_game " << fs_game << " "; + } + if ( g_pGameDescription->mGameType == "wolf" ) { + //|| g_pGameDescription->mGameType == "et") + if ( string_equal( gamemode_get(), "mp" ) ) { + // MP + string << "+devmap " << mapname; + } + else + { + // SP + string << "+set nextmap \"spdevmap " << mapname << "\""; + } + } + else + { + string << "+devmap " << mapname; + } + } } -void CWatchBSP::RoutineProcessing() -{ - switch (m_eState) - { - case EBeginStep: - // timeout: if we don't get an incoming connection fast enough, go back to idle - if ( g_timer_elapsed( m_pTimer, NULL ) > g_WatchBSP_Timeout ) - { - gtk_MessageBox(GTK_WIDGET(MainFrame_getWindow()), "The connection timed out, assuming the build process failed\nMake sure you are using a networked version of Q3Map?\nOtherwise you need to disable BSP Monitoring in prefs.", "BSP process monitoring", eMB_OK ); - EndMonitoringLoop(); +void CWatchBSP::RoutineProcessing(){ + switch ( m_eState ) + { + case EBeginStep: + // timeout: if we don't get an incoming connection fast enough, go back to idle + if ( g_timer_elapsed( m_pTimer, NULL ) > g_WatchBSP_Timeout ) { + MainFrame_getWindow().alert( "The connection timed out, assuming the build process failed\nMake sure you are using a networked version of Q3Map?\nOtherwise you need to disable BSP Monitoring in prefs.", "BSP process monitoring", ui::alert_type::OK ); + EndMonitoringLoop(); #if 0 - if (m_bBSPPlugin) - { - // status == 1 : didn't get the connection - g_BSPFrontendTable.m_pfnEndListen(1); - } + if ( m_bBSPPlugin ) { + // status == 1 : didn't get the connection + g_BSPFrontendTable.m_pfnEndListen( 1 ); + } #endif - return; - } + return; + } #ifdef _DEBUG - // some debug checks - if (!m_pListenSocket) - { - globalErrorStream() << "ERROR: m_pListenSocket == NULL in CWatchBSP::RoutineProcessing EBeginStep state\n"; - return; - } + // some debug checks + if ( !m_pListenSocket ) { + globalErrorStream() << "ERROR: m_pListenSocket == NULL in CWatchBSP::RoutineProcessing EBeginStep state\n"; + return; + } #endif - // we are not connected yet, accept any incoming connection - m_pInSocket = Net_Accept(m_pListenSocket); - if (m_pInSocket) - { - globalOutputStream() << "Connected.\n"; - // prepare the message info struct for diving in - memset (&m_message_info, 0, sizeof(message_info_t)); - // a dumb flag to make sure we init the push parser context when first getting a msg - m_bNeedCtxtInit = true; - m_eState = EWatching; - } - break; - case EWatching: - { + // we are not connected yet, accept any incoming connection + m_pInSocket = Net_Accept( m_pListenSocket ); + if ( m_pInSocket ) { + globalOutputStream() << "Connected.\n"; + // prepare the message info struct for diving in + memset( &m_message_info, 0, sizeof( message_info_t ) ); + // a dumb flag to make sure we init the push parser context when first getting a msg + m_bNeedCtxtInit = true; + m_eState = EWatching; + } + break; + case EWatching: + { #ifdef _DEBUG - // some debug checks - if (!m_pInSocket) - { - globalErrorStream() << "ERROR: m_pInSocket == NULL in CWatchBSP::RoutineProcessing EWatching state\n"; - return; - } + // some debug checks + if ( !m_pInSocket ) { + globalErrorStream() << "ERROR: m_pInSocket == NULL in CWatchBSP::RoutineProcessing EWatching state\n"; + return; + } #endif - int ret = Net_Wait(m_pInSocket, 0, 0); - if (ret == -1) - { - globalOutputStream() << "WARNING: SOCKET_ERROR in CWatchBSP::RoutineProcessing\n"; - globalOutputStream() << "Terminating the connection.\n"; - EndMonitoringLoop(); - return; - } - - if (ret == 1) - { - // the socket has been identified, there's something (message or disconnection) - // see if there's anything in input - ret = Net_Receive( m_pInSocket, &msg ); - if (ret > 0) - { - // unsigned int size = msg.size; //++timo just a check - strcpy (m_xmlBuf, NMSG_ReadString (&msg)); - if (m_bNeedCtxtInit) - { - m_xmlParserCtxt = NULL; - m_xmlParserCtxt = xmlCreatePushParserCtxt (&saxParser, &m_message_info, m_xmlBuf, static_cast(strlen(m_xmlBuf)), NULL); - - if (m_xmlParserCtxt == NULL) - { - globalErrorStream() << "Failed to create the XML parser (incoming stream began with: " << m_xmlBuf << ")\n"; - EndMonitoringLoop(); - } - m_bNeedCtxtInit = false; - } - else - { - xmlParseChunk(m_xmlParserCtxt, m_xmlBuf, static_cast(strlen(m_xmlBuf)), 0); - } - } - else - { - message_flush(&m_message_info); - // error or connection closed/reset - // NOTE: if we get an error down the XML stream we don't reach here - Net_Disconnect( m_pInSocket ); - m_pInSocket = NULL; - globalOutputStream() << "Connection closed.\n"; + int ret = Net_Wait( m_pInSocket, 0, 0 ); + if ( ret == -1 ) { + globalOutputStream() << "WARNING: SOCKET_ERROR in CWatchBSP::RoutineProcessing\n"; + globalOutputStream() << "Terminating the connection.\n"; + EndMonitoringLoop(); + return; + } + + if ( ret == 1 ) { + // the socket has been identified, there's something (message or disconnection) + // see if there's anything in input + ret = Net_Receive( m_pInSocket, &msg ); + if ( ret > 0 ) { + // unsigned int size = msg.size; //++timo just a check + strcpy( m_xmlBuf, NMSG_ReadString( &msg ) ); + if ( m_bNeedCtxtInit ) { + m_xmlParserCtxt = NULL; + m_xmlParserCtxt = xmlCreatePushParserCtxt( &saxParser, &m_message_info, m_xmlBuf, static_cast( strlen( m_xmlBuf ) ), NULL ); + + if ( m_xmlParserCtxt == NULL ) { + globalErrorStream() << "Failed to create the XML parser (incoming stream began with: " << m_xmlBuf << ")\n"; + EndMonitoringLoop(); + } + m_bNeedCtxtInit = false; + } + else + { + xmlParseChunk( m_xmlParserCtxt, m_xmlBuf, static_cast( strlen( m_xmlBuf ) ), 0 ); + } + } + else + { + message_flush( &m_message_info ); + // error or connection closed/reset + // NOTE: if we get an error down the XML stream we don't reach here + Net_Disconnect( m_pInSocket ); + m_pInSocket = NULL; + globalOutputStream() << "Connection closed.\n"; #if 0 - if (m_bBSPPlugin) - { - EndMonitoringLoop(); - // let the BSP plugin know that the job is done - g_BSPFrontendTable.m_pfnEndListen(0); - return; - } + if ( m_bBSPPlugin ) { + EndMonitoringLoop(); + // let the BSP plugin know that the job is done + g_BSPFrontendTable.m_pfnEndListen( 0 ); + return; + } #endif - // move to next step or finish - m_iCurrentStep++; - if (m_iCurrentStep < m_pCmd->len ) - { - DoEBeginStep(); - } - else - { - // launch the engine .. OMG - if (g_WatchBSP_RunQuake) - { + // move to next step or finish + m_iCurrentStep++; + if ( m_iCurrentStep < m_pCmd->len ) { + DoEBeginStep(); + } + else + { + // launch the engine .. OMG + if ( g_WatchBSP_RunQuake ) { #if 0 - // do we enter sleep mode before? - if (g_WatchBSP_DoSleep) - { - globalOutputStream() << "Going into sleep mode..\n"; - g_pParentWnd->OnSleep(); - } + // do we enter sleep mode before? + if ( g_WatchBSP_DoSleep ) { + globalOutputStream() << "Going into sleep mode..\n"; + g_pParentWnd->OnSleep(); + } #endif - globalOutputStream() << "Running engine...\n"; - StringOutputStream cmd(256); - // build the command line - cmd << EnginePath_get(); - // this is game dependant - - RunEngineConfiguration engineConfig; - - if(engineConfig.do_sp_mp) - { - if (string_equal(gamemode_get(), "mp")) - { - cmd << engineConfig.mp_executable; - } - else - { - cmd << engineConfig.executable; - } - } - else - { - cmd << engineConfig.executable; - } - - StringOutputStream cmdline; - - GlobalGameDescription_string_write_mapparameter(cmdline, m_sBSPName); - - globalOutputStream() << cmd.c_str() << " " << cmdline.c_str() << "\n"; - - // execute now - if (!Q_Exec(cmd.c_str(), (char *)cmdline.c_str(), EnginePath_get(), false, false)) - { - StringOutputStream msg; - msg << "Failed to execute the following command: " << cmd.c_str() << cmdline.c_str(); - globalOutputStream() << msg.c_str(); - gtk_MessageBox(GTK_WIDGET(MainFrame_getWindow()), msg.c_str(), "Build monitoring", eMB_OK, eMB_ICONERROR ); - } - } - EndMonitoringLoop(); - } - } - } - } - break; - default: - break; - } + globalOutputStream() << "Running engine...\n"; + StringOutputStream cmd( 256 ); + // build the command line + cmd << EnginePath_get(); + // this is game dependant + + RunEngineConfiguration engineConfig; + + if ( engineConfig.do_sp_mp ) { + if ( string_equal( gamemode_get(), "mp" ) ) { + cmd << engineConfig.mp_executable; + } + else + { + cmd << engineConfig.executable; + } + } + else + { + cmd << engineConfig.executable; + } + + StringOutputStream cmdline; + + GlobalGameDescription_string_write_mapparameter( cmdline, m_sBSPName ); + + globalOutputStream() << cmd.c_str() << " " << cmdline.c_str() << "\n"; + + // execute now + if ( !Q_Exec( cmd.c_str(), (char *)cmdline.c_str(), EnginePath_get(), false, false ) ) { + StringOutputStream msg; + msg << "Failed to execute the following command: " << cmd.c_str() << cmdline.c_str(); + globalOutputStream() << msg.c_str(); + MainFrame_getWindow().alert( msg.c_str(), "Build monitoring", ui::alert_type::OK, ui::alert_icon::ERROR ); + } + } + EndMonitoringLoop(); + } + } + } + } + break; + default: + break; + } } -GPtrArray* str_ptr_array_clone(GPtrArray* array) -{ - GPtrArray* cloned = g_ptr_array_sized_new(array->len); - for(guint i = 0; i < array->len; ++i) - { - g_ptr_array_add(cloned, g_strdup((char*)g_ptr_array_index(array, i))); - } - return cloned; +GPtrArray* str_ptr_array_clone( GPtrArray* array ){ + GPtrArray* cloned = g_ptr_array_sized_new( array->len ); + for ( guint i = 0; i < array->len; ++i ) + { + g_ptr_array_add( cloned, g_strdup( (char*)g_ptr_array_index( array, i ) ) ); + } + return cloned; } -void CWatchBSP::DoMonitoringLoop( GPtrArray *pCmd, const char *sBSPName ) -{ - m_sBSPName = string_clone(sBSPName); - if (m_eState != EIdle) - { - globalOutputStream() << "WatchBSP got a monitoring request while not idling...\n"; - // prompt the user, should we cancel the current process and go ahead? - if (gtk_MessageBox(GTK_WIDGET(MainFrame_getWindow()), "I am already monitoring a Build process.\nDo you want me to override and start a new compilation?", - "Build process monitoring", eMB_YESNO ) == eIDYES) - { - // disconnect and set EIdle state - Reset(); - } - } - m_pCmd = str_ptr_array_clone(pCmd); - m_iCurrentStep = 0; - DoEBeginStep(); +void CWatchBSP::DoMonitoringLoop( GPtrArray *pCmd, const char *sBSPName ){ + m_sBSPName = string_clone( sBSPName ); + if ( m_eState != EIdle ) { + globalOutputStream() << "WatchBSP got a monitoring request while not idling...\n"; + // prompt the user, should we cancel the current process and go ahead? + if ( MainFrame_getWindow().alert( "I am already monitoring a Build process.\nDo you want me to override and start a new compilation?", + "Build process monitoring", ui::alert_type::YESNO ) == ui::alert_response::YES ) { + // disconnect and set EIdle state + Reset(); + } + } + m_pCmd = str_ptr_array_clone( pCmd ); + m_iCurrentStep = 0; + DoEBeginStep(); } -void CWatchBSP::ExternalListen() -{ - m_bBSPPlugin = true; - DoEBeginStep(); +void CWatchBSP::ExternalListen(){ + m_bBSPPlugin = true; + DoEBeginStep(); } // the part of the watchbsp interface we export to plugins // NOTE: in the long run, the whole watchbsp.cpp interface needs to go out and be handled at the BSP plugin level // for now we provide something really basic and limited, the essential is to have something that works fine and fast (for 1.1 final) -void QERApp_Listen() -{ - // open the listening socket - GetWatchBSP()->ExternalListen(); +void QERApp_Listen(){ + // open the listening socket + GetWatchBSP()->ExternalListen(); }