#define COLLISION_PLANE_DIST_EPSILON (2.0f / COLLISION_SNAPSCALE)
cvar_t collision_impactnudge = {0, "collision_impactnudge", "0.03125", "how much to back off from the impact"};
-cvar_t collision_startnudge = {0, "collision_startnudge", "0", "how much to bias collision trace start"};
-cvar_t collision_endnudge = {0, "collision_endnudge", "0", "how much to bias collision trace end"};
-cvar_t collision_enternudge = {0, "collision_enternudge", "0", "how much to bias collision entry fraction"};
-cvar_t collision_leavenudge = {0, "collision_leavenudge", "0", "how much to bias collision exit fraction"};
-cvar_t collision_prefernudgedfraction = {0, "collision_prefernudgedfraction", "1", "whether to sort collision events by nudged fraction (1) or real fraction (0)"};
+cvar_t collision_extendmovelength = {0, "collision_extendmovelength", "16", "internal bias on trace length to ensure detection of collisions within the collision_impactnudge distance so that short moves do not degrade across frames (this does not alter the final trace length)"};
+cvar_t collision_extendtraceboxlength = {0, "collision_extendtraceboxlength", "1", "internal bias for tracebox() qc builtin to account for collision_impactnudge (this does not alter the final trace length)"};
+cvar_t collision_extendtracelinelength = {0, "collision_extendtracelinelength", "1", "internal bias for traceline() qc builtin to account for collision_impactnudge (this does not alter the final trace length)"};
+cvar_t collision_debug_tracelineasbox = {0, "collision_debug_tracelineasbox", "0", "workaround for any bugs in Collision_TraceLineBrushFloat by using Collision_TraceBrushBrushFloat"};
+cvar_t collision_cache = {0, "collision_cache", "1", "store results of collision traces for next frame to reuse if possible (optimization)"};
+//cvar_t collision_triangle_neighborsides = {0, "collision_triangle_neighborsides", "1", "override automatic side generation if triangle has neighbors with face planes that form a convex edge (perfect solution, but can not work for all edges)"};
+cvar_t collision_triangle_bevelsides = {0, "collision_triangle_bevelsides", "0", "generate sloped edge planes on triangles - if 0, see axialedgeplanes"};
+cvar_t collision_triangle_axialsides = {0, "collision_triangle_axialsides", "1", "generate axially-aligned edge planes on triangles - otherwise use perpendicular edge planes"};
+
+mempool_t *collision_mempool;
void Collision_Init (void)
{
Cvar_RegisterVariable(&collision_impactnudge);
- Cvar_RegisterVariable(&collision_startnudge);
- Cvar_RegisterVariable(&collision_endnudge);
- Cvar_RegisterVariable(&collision_enternudge);
- Cvar_RegisterVariable(&collision_leavenudge);
- Cvar_RegisterVariable(&collision_prefernudgedfraction);
+ Cvar_RegisterVariable(&collision_extendmovelength);
+ Cvar_RegisterVariable(&collision_extendtracelinelength);
+ Cvar_RegisterVariable(&collision_extendtraceboxlength);
+ Cvar_RegisterVariable(&collision_debug_tracelineasbox);
+ Cvar_RegisterVariable(&collision_cache);
+// Cvar_RegisterVariable(&collision_triangle_neighborsides);
+ Cvar_RegisterVariable(&collision_triangle_bevelsides);
+ Cvar_RegisterVariable(&collision_triangle_axialsides);
+ collision_mempool = Mem_AllocPool("collision cache", 0, NULL);
+ Collision_Cache_Init(collision_mempool);
}
-void Collision_PrintBrushAsQHull(colbrushf_t *brush, const char *name)
+static void Collision_PrintBrushAsQHull(colbrushf_t *brush, const char *name)
{
int i;
Con_Printf("3 %s\n%i\n", name, brush->numpoints);
Con_Printf("%f %f %f %f\n", brush->planes[i].normal[0], brush->planes[i].normal[1], brush->planes[i].normal[2], brush->planes[i].dist);
}
-void Collision_ValidateBrush(colbrushf_t *brush)
+static void Collision_ValidateBrush(colbrushf_t *brush)
{
int j, k, pointsoffplanes, pointonplanes, pointswithinsufficientplanes, printbrush;
float d;
Collision_PrintBrushAsQHull(brush, "unnamed");
}
-float nearestplanedist_float(const float *normal, const colpointf_t *points, int numpoints)
+static float nearestplanedist_float(const float *normal, const colpointf_t *points, int numpoints)
{
float dist, bestdist;
if (!numpoints)
return bestdist;
}
-float furthestplanedist_float(const float *normal, const colpointf_t *points, int numpoints)
+static float furthestplanedist_float(const float *normal, const colpointf_t *points, int numpoints)
{
float dist, bestdist;
if (!numpoints)
return bestdist;
}
-void Collision_CalcEdgeDirsForPolygonBrushFloat(colbrushf_t *brush)
+static void Collision_CalcEdgeDirsForPolygonBrushFloat(colbrushf_t *brush)
{
int i, j;
for (i = 0, j = brush->numpoints - 1;i < brush->numpoints;j = i, i++)
VectorSubtract(brush->points[i].v, brush->points[j].v, brush->edgedirs[j].v);
}
-colbrushf_t *Collision_NewBrushFromPlanes(mempool_t *mempool, int numoriginalplanes, const colplanef_t *originalplanes, int supercontents, int q3surfaceflags, texture_t *texture, int hasaabbplanes)
+colbrushf_t *Collision_NewBrushFromPlanes(mempool_t *mempool, int numoriginalplanes, const colplanef_t *originalplanes, int supercontents, int q3surfaceflags, const texture_t *texture, int hasaabbplanes)
{
// TODO: planesbuf could be replaced by a remapping table
- int j, k, l, m, w, xyzflags;
+ int j, k, w, xyzflags;
int numpointsbuf = 0, maxpointsbuf = 256, numedgedirsbuf = 0, maxedgedirsbuf = 256, numplanesbuf = 0, maxplanesbuf = 256, numelementsbuf = 0, maxelementsbuf = 256;
int isaabb = true;
double maxdist;
// whose polygon is clipped away by the other planes)
for (j = 0;j < numoriginalplanes;j++)
{
+ int n;
// add the new plane
VectorCopy(originalplanes[j].normal, planesbuf[numplanesbuf].normal);
planesbuf[numplanesbuf].dist = originalplanes[j].dist;
// add the unique points for this polygon
for (k = 0;k < pnumpoints;k++)
{
+ int m;
float v[3];
// downgrade to float precision before comparing
VectorCopy(&p[w][k*3], v);
}
// add the unique edgedirs for this polygon
- for (k = 0, l = pnumpoints-1;k < pnumpoints;l = k, k++)
+ for (k = 0, n = pnumpoints-1;k < pnumpoints;n = k, k++)
{
+ int m;
float dir[3];
// downgrade to float precision before comparing
- VectorSubtract(&p[w][k*3], &p[w][l*3], dir);
+ VectorSubtract(&p[w][k*3], &p[w][n*3], dir);
VectorNormalize(dir);
// check if there is already a matching edgedir (no duplicates)
-void Collision_CalcPlanesForPolygonBrushFloat(colbrushf_t *brush)
+void Collision_CalcPlanesForTriangleBrushFloat(colbrushf_t *brush)
{
- int i;
- float edge0[3], edge1[3], edge2[3], normal[3], dist, bestdist;
- colpointf_t *p, *p2;
+ float edge0[3], edge1[3], edge2[3];
+ colpointf_t *p;
- // FIXME: these probably don't actually need to be normalized if the collision code does not care
- if (brush->numpoints == 3)
+ TriangleNormal(brush->points[0].v, brush->points[1].v, brush->points[2].v, brush->planes[0].normal);
+ if (DotProduct(brush->planes[0].normal, brush->planes[0].normal) < 0.0001f)
{
- // optimized triangle case
- TriangleNormal(brush->points[0].v, brush->points[1].v, brush->points[2].v, brush->planes[0].normal);
- if (DotProduct(brush->planes[0].normal, brush->planes[0].normal) < 0.0001f)
- {
- // there's no point in processing a degenerate triangle (GIGO - Garbage In, Garbage Out)
- brush->numplanes = 0;
- return;
- }
- else
- {
- brush->numplanes = 5;
- brush->numedgedirs = 3;
- VectorNormalize(brush->planes[0].normal);
- brush->planes[0].dist = DotProduct(brush->points->v, brush->planes[0].normal);
- VectorNegate(brush->planes[0].normal, brush->planes[1].normal);
- brush->planes[1].dist = -brush->planes[0].dist;
- VectorSubtract(brush->points[2].v, brush->points[0].v, edge0);
- VectorSubtract(brush->points[0].v, brush->points[1].v, edge1);
- VectorSubtract(brush->points[1].v, brush->points[2].v, edge2);
- VectorCopy(edge0, brush->edgedirs[0].v);
- VectorCopy(edge1, brush->edgedirs[1].v);
- VectorCopy(edge2, brush->edgedirs[2].v);
-#if 1
- {
- float projectionnormal[3], projectionedge0[3], projectionedge1[3], projectionedge2[3];
- int i, best;
- float dist, bestdist;
- bestdist = fabs(brush->planes[0].normal[0]);
- best = 0;
- for (i = 1;i < 3;i++)
- {
- dist = fabs(brush->planes[0].normal[i]);
- if (bestdist < dist)
- {
- bestdist = dist;
- best = i;
- }
- }
- VectorClear(projectionnormal);
- if (brush->planes[0].normal[best] < 0)
- projectionnormal[best] = -1;
- else
- projectionnormal[best] = 1;
- VectorCopy(edge0, projectionedge0);
- VectorCopy(edge1, projectionedge1);
- VectorCopy(edge2, projectionedge2);
- projectionedge0[best] = 0;
- projectionedge1[best] = 0;
- projectionedge2[best] = 0;
- CrossProduct(projectionedge0, projectionnormal, brush->planes[2].normal);
- CrossProduct(projectionedge1, projectionnormal, brush->planes[3].normal);
- CrossProduct(projectionedge2, projectionnormal, brush->planes[4].normal);
- }
-#else
- CrossProduct(edge0, brush->planes->normal, brush->planes[2].normal);
- CrossProduct(edge1, brush->planes->normal, brush->planes[3].normal);
- CrossProduct(edge2, brush->planes->normal, brush->planes[4].normal);
-#endif
- VectorNormalize(brush->planes[2].normal);
- VectorNormalize(brush->planes[3].normal);
- VectorNormalize(brush->planes[4].normal);
- brush->planes[2].dist = DotProduct(brush->points[2].v, brush->planes[2].normal);
- brush->planes[3].dist = DotProduct(brush->points[0].v, brush->planes[3].normal);
- brush->planes[4].dist = DotProduct(brush->points[1].v, brush->planes[4].normal);
-
- if (developer.integer >= 100)
- {
- // validation code
-#if 0
- float temp[3];
-
- VectorSubtract(brush->points[0].v, brush->points[1].v, edge0);
- VectorSubtract(brush->points[2].v, brush->points[1].v, edge1);
- CrossProduct(edge0, edge1, normal);
- VectorNormalize(normal);
- VectorSubtract(normal, brush->planes[0].normal, temp);
- if (VectorLength(temp) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: TriangleNormal gave wrong answer (%f %f %f != correct answer %f %f %f)\n", brush->planes->normal[0], brush->planes->normal[1], brush->planes->normal[2], normal[0], normal[1], normal[2]);
- if (fabs(DotProduct(brush->planes[1].normal, brush->planes[0].normal) - -1.0f) > 0.01f || fabs(brush->planes[1].dist - -brush->planes[0].dist) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: plane 1 (%f %f %f %f) is not opposite plane 0 (%f %f %f %f)\n", brush->planes[1].normal[0], brush->planes[1].normal[1], brush->planes[1].normal[2], brush->planes[1].dist, brush->planes[0].normal[0], brush->planes[0].normal[1], brush->planes[0].normal[2], brush->planes[0].dist);
-#if 0
- if (fabs(DotProduct(brush->planes[2].normal, brush->planes[0].normal)) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: plane 2 (%f %f %f %f) is not perpendicular to plane 0 (%f %f %f %f)\n", brush->planes[2].normal[0], brush->planes[2].normal[1], brush->planes[2].normal[2], brush->planes[2].dist, brush->planes[0].normal[0], brush->planes[0].normal[1], brush->planes[0].normal[2], brush->planes[2].dist);
- if (fabs(DotProduct(brush->planes[3].normal, brush->planes[0].normal)) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: plane 3 (%f %f %f %f) is not perpendicular to plane 0 (%f %f %f %f)\n", brush->planes[3].normal[0], brush->planes[3].normal[1], brush->planes[3].normal[2], brush->planes[3].dist, brush->planes[0].normal[0], brush->planes[0].normal[1], brush->planes[0].normal[2], brush->planes[3].dist);
- if (fabs(DotProduct(brush->planes[4].normal, brush->planes[0].normal)) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: plane 4 (%f %f %f %f) is not perpendicular to plane 0 (%f %f %f %f)\n", brush->planes[4].normal[0], brush->planes[4].normal[1], brush->planes[4].normal[2], brush->planes[4].dist, brush->planes[0].normal[0], brush->planes[0].normal[1], brush->planes[0].normal[2], brush->planes[4].dist);
- if (fabs(DotProduct(brush->planes[2].normal, edge0)) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: plane 2 (%f %f %f %f) is not perpendicular to edge 0 (%f %f %f to %f %f %f)\n", brush->planes[2].normal[0], brush->planes[2].normal[1], brush->planes[2].normal[2], brush->planes[2].dist, brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2], brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2]);
- if (fabs(DotProduct(brush->planes[3].normal, edge1)) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: plane 3 (%f %f %f %f) is not perpendicular to edge 1 (%f %f %f to %f %f %f)\n", brush->planes[3].normal[0], brush->planes[3].normal[1], brush->planes[3].normal[2], brush->planes[3].dist, brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2], brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2]);
- if (fabs(DotProduct(brush->planes[4].normal, edge2)) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: plane 4 (%f %f %f %f) is not perpendicular to edge 2 (%f %f %f to %f %f %f)\n", brush->planes[4].normal[0], brush->planes[4].normal[1], brush->planes[4].normal[2], brush->planes[4].dist, brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2], brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2]);
-#endif
-#endif
- if (fabs(DotProduct(brush->points[0].v, brush->planes[0].normal) - brush->planes[0].dist) > 0.01f || fabs(DotProduct(brush->points[1].v, brush->planes[0].normal) - brush->planes[0].dist) > 0.01f || fabs(DotProduct(brush->points[2].v, brush->planes[0].normal) - brush->planes[0].dist) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: edges (%f %f %f to %f %f %f to %f %f %f) off front plane 0 (%f %f %f %f)\n", brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2], brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2], brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2], brush->planes[0].normal[0], brush->planes[0].normal[1], brush->planes[0].normal[2], brush->planes[0].dist);
- if (fabs(DotProduct(brush->points[0].v, brush->planes[1].normal) - brush->planes[1].dist) > 0.01f || fabs(DotProduct(brush->points[1].v, brush->planes[1].normal) - brush->planes[1].dist) > 0.01f || fabs(DotProduct(brush->points[2].v, brush->planes[1].normal) - brush->planes[1].dist) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: edges (%f %f %f to %f %f %f to %f %f %f) off back plane 1 (%f %f %f %f)\n", brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2], brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2], brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2], brush->planes[1].normal[0], brush->planes[1].normal[1], brush->planes[1].normal[2], brush->planes[1].dist);
- if (fabs(DotProduct(brush->points[2].v, brush->planes[2].normal) - brush->planes[2].dist) > 0.01f || fabs(DotProduct(brush->points[0].v, brush->planes[2].normal) - brush->planes[2].dist) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: edge 0 (%f %f %f to %f %f %f) off front plane 2 (%f %f %f %f)\n", brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2], brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2], brush->planes[2].normal[0], brush->planes[2].normal[1], brush->planes[2].normal[2], brush->planes[2].dist);
- if (fabs(DotProduct(brush->points[0].v, brush->planes[3].normal) - brush->planes[3].dist) > 0.01f || fabs(DotProduct(brush->points[1].v, brush->planes[3].normal) - brush->planes[3].dist) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: edge 0 (%f %f %f to %f %f %f) off front plane 2 (%f %f %f %f)\n", brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2], brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2], brush->planes[3].normal[0], brush->planes[3].normal[1], brush->planes[3].normal[2], brush->planes[3].dist);
- if (fabs(DotProduct(brush->points[1].v, brush->planes[4].normal) - brush->planes[4].dist) > 0.01f || fabs(DotProduct(brush->points[2].v, brush->planes[4].normal) - brush->planes[4].dist) > 0.01f)
- Con_Printf("Collision_CalcPlanesForPolygonBrushFloat: edge 0 (%f %f %f to %f %f %f) off front plane 2 (%f %f %f %f)\n", brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2], brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2], brush->planes[4].normal[0], brush->planes[4].normal[1], brush->planes[4].normal[2], brush->planes[4].dist);
- }
- }
+ // there's no point in processing a degenerate triangle (GIGO - Garbage In, Garbage Out)
+ // note that some of these exist in q3bsp bspline patches
+ brush->numplanes = 0;
+ return;
}
- else
+
+ // there are 5 planes (front, back, sides) and 3 edges
+ brush->numplanes = 5;
+ brush->numedgedirs = 3;
+ VectorNormalize(brush->planes[0].normal);
+ brush->planes[0].dist = DotProduct(brush->points->v, brush->planes[0].normal);
+ VectorNegate(brush->planes[0].normal, brush->planes[1].normal);
+ brush->planes[1].dist = -brush->planes[0].dist;
+ // edge directions are easy to calculate
+ VectorSubtract(brush->points[2].v, brush->points[0].v, edge0);
+ VectorSubtract(brush->points[0].v, brush->points[1].v, edge1);
+ VectorSubtract(brush->points[1].v, brush->points[2].v, edge2);
+ VectorCopy(edge0, brush->edgedirs[0].v);
+ VectorCopy(edge1, brush->edgedirs[1].v);
+ VectorCopy(edge2, brush->edgedirs[2].v);
+ // now select an algorithm to generate the side planes
+ if (collision_triangle_bevelsides.integer)
{
- // choose best surface normal for polygon's plane
- bestdist = 0;
- for (i = 0, p = brush->points + 1;i < brush->numpoints - 2;i++, p++)
+ // use 45 degree slopes at the edges of the triangle to make a sinking trace error turn into "riding up" the slope rather than getting stuck
+ CrossProduct(edge0, brush->planes->normal, brush->planes[2].normal);
+ CrossProduct(edge1, brush->planes->normal, brush->planes[3].normal);
+ CrossProduct(edge2, brush->planes->normal, brush->planes[4].normal);
+ VectorNormalize(brush->planes[2].normal);
+ VectorNormalize(brush->planes[3].normal);
+ VectorNormalize(brush->planes[4].normal);
+ VectorAdd(brush->planes[2].normal, brush->planes[0].normal, brush->planes[2].normal);
+ VectorAdd(brush->planes[3].normal, brush->planes[0].normal, brush->planes[3].normal);
+ VectorAdd(brush->planes[4].normal, brush->planes[0].normal, brush->planes[4].normal);
+ VectorNormalize(brush->planes[2].normal);
+ VectorNormalize(brush->planes[3].normal);
+ VectorNormalize(brush->planes[4].normal);
+ }
+ else if (collision_triangle_axialsides.integer)
+ {
+ float projectionnormal[3], projectionedge0[3], projectionedge1[3], projectionedge2[3];
+ int i, best;
+ float dist, bestdist;
+ bestdist = fabs(brush->planes[0].normal[0]);
+ best = 0;
+ for (i = 1;i < 3;i++)
{
- VectorSubtract(p[-1].v, p[0].v, edge0);
- VectorSubtract(p[1].v, p[0].v, edge1);
- CrossProduct(edge0, edge1, normal);
- //TriangleNormal(p[-1].v, p[0].v, p[1].v, normal);
- dist = DotProduct(normal, normal);
- if (i == 0 || bestdist < dist)
+ dist = fabs(brush->planes[0].normal[i]);
+ if (bestdist < dist)
{
bestdist = dist;
- VectorCopy(normal, brush->planes->normal);
+ best = i;
}
}
- if (bestdist < 0.0001f)
- {
- // there's no point in processing a degenerate triangle (GIGO - Garbage In, Garbage Out)
- brush->numplanes = 0;
- return;
- }
+ VectorClear(projectionnormal);
+ if (brush->planes[0].normal[best] < 0)
+ projectionnormal[best] = -1;
else
- {
- brush->numplanes = brush->numpoints + 2;
- VectorNormalize(brush->planes->normal);
- brush->planes->dist = DotProduct(brush->points->v, brush->planes->normal);
-
- // negate plane to create other side
- VectorNegate(brush->planes[0].normal, brush->planes[1].normal);
- brush->planes[1].dist = -brush->planes[0].dist;
- for (i = 0, p = brush->points + (brush->numpoints - 1), p2 = brush->points;i < brush->numpoints;i++, p = p2, p2++)
- {
- VectorSubtract(p->v, p2->v, edge0);
- CrossProduct(edge0, brush->planes->normal, brush->planes[i + 2].normal);
- VectorNormalize(brush->planes[i + 2].normal);
- brush->planes[i + 2].dist = DotProduct(p->v, brush->planes[i + 2].normal);
- }
- }
+ projectionnormal[best] = 1;
+ VectorCopy(edge0, projectionedge0);
+ VectorCopy(edge1, projectionedge1);
+ VectorCopy(edge2, projectionedge2);
+ projectionedge0[best] = 0;
+ projectionedge1[best] = 0;
+ projectionedge2[best] = 0;
+ CrossProduct(projectionedge0, projectionnormal, brush->planes[2].normal);
+ CrossProduct(projectionedge1, projectionnormal, brush->planes[3].normal);
+ CrossProduct(projectionedge2, projectionnormal, brush->planes[4].normal);
+ VectorNormalize(brush->planes[2].normal);
+ VectorNormalize(brush->planes[3].normal);
+ VectorNormalize(brush->planes[4].normal);
}
+ else
+ {
+ CrossProduct(edge0, brush->planes->normal, brush->planes[2].normal);
+ CrossProduct(edge1, brush->planes->normal, brush->planes[3].normal);
+ CrossProduct(edge2, brush->planes->normal, brush->planes[4].normal);
+ VectorNormalize(brush->planes[2].normal);
+ VectorNormalize(brush->planes[3].normal);
+ VectorNormalize(brush->planes[4].normal);
+ }
+ brush->planes[2].dist = DotProduct(brush->points[2].v, brush->planes[2].normal);
+ brush->planes[3].dist = DotProduct(brush->points[0].v, brush->planes[3].normal);
+ brush->planes[4].dist = DotProduct(brush->points[1].v, brush->planes[4].normal);
- if (developer.integer >= 100)
+ if (developer_extra.integer)
{
+ int i;
// validity check - will be disabled later
Collision_ValidateBrush(brush);
for (i = 0;i < brush->numplanes;i++)
int j;
for (j = 0, p = brush->points;j < brush->numpoints;j++, p++)
if (DotProduct(p->v, brush->planes[i].normal) > brush->planes[i].dist + COLLISION_PLANE_DIST_EPSILON)
- Con_Printf("Error in brush plane generation, plane %i\n", i);
+ Con_DPrintf("Error in brush plane generation, plane %i\n", i);
}
}
}
-colbrushf_t *Collision_AllocBrushFromPermanentPolygonFloat(mempool_t *mempool, int numpoints, float *points, int supercontents, int q3surfaceflags, texture_t *texture)
+colbrushf_t *Collision_AllocBrushFromPermanentPolygonFloat(mempool_t *mempool, int numpoints, float *points, int supercontents, int q3surfaceflags, const texture_t *texture)
{
colbrushf_t *brush;
brush = (colbrushf_t *)Mem_Alloc(mempool, sizeof(colbrushf_t) + sizeof(colplanef_t) * (numpoints + 2) + sizeof(colpointf_t) * numpoints);
vec4_t startplane;
vec4_t endplane;
vec4_t newimpactplane;
- texture_t *hittexture = NULL;
+ const texture_t *hittexture = NULL;
vec_t startdepth = 1;
vec3_t startdepthnormal;
if (nplane2 & 1)
{
CrossProduct(trace_start->edgedirs[nedge1].v, other_start->edgedirs[nedge2].v, startplane);
- if (VectorLength2(startplane) < COLLISION_EDGECROSS_MINLENGTH2)
- continue; // degenerate crossproduct
CrossProduct(trace_end->edgedirs[nedge1].v, other_end->edgedirs[nedge2].v, endplane);
- if (VectorLength2(endplane) < COLLISION_EDGECROSS_MINLENGTH2)
- continue; // degenerate crossproduct
}
else
{
CrossProduct(other_start->edgedirs[nedge2].v, trace_start->edgedirs[nedge1].v, startplane);
- if (VectorLength2(startplane) < COLLISION_EDGECROSS_MINLENGTH2)
- continue; // degenerate crossproduct
CrossProduct(other_end->edgedirs[nedge2].v, trace_end->edgedirs[nedge1].v, endplane);
- if (VectorLength2(endplane) < COLLISION_EDGECROSS_MINLENGTH2)
- continue; // degenerate crossproduct
}
+ if (VectorLength2(startplane) < COLLISION_EDGECROSS_MINLENGTH2 || VectorLength2(endplane) < COLLISION_EDGECROSS_MINLENGTH2)
+ continue; // degenerate crossproducts
VectorNormalize(startplane);
VectorNormalize(endplane);
}
startplane[3] = furthestplanedist_float(startplane, other_start->points, othernumpoints);
endplane[3] = furthestplanedist_float(startplane, other_end->points, othernumpoints);
- startdist = nearestplanedist_float(startplane, trace_start->points, tracenumpoints) - startplane[3] - collision_startnudge.value;
- enddist = nearestplanedist_float(endplane, trace_end->points, tracenumpoints) - endplane[3] - collision_endnudge.value;
+ startdist = nearestplanedist_float(startplane, trace_start->points, tracenumpoints) - startplane[3];
+ enddist = nearestplanedist_float(endplane, trace_end->points, tracenumpoints) - endplane[3];
//Con_Printf("%c%i: startdist = %f, enddist = %f, startdist / (startdist - enddist) = %f\n", nplane2 != nplane ? 'b' : 'a', nplane2, startdist, enddist, startdist / (startdist - enddist));
// aside from collisions, this is also used for error correction
- if (startdist < 0 && (startdepth < startdist || startdepth == 1))
+ if (startdist <= 0.0f && nplane < numplanes1 && (startdepth < startdist || startdepth == 1))
{
startdepth = startdist;
VectorCopy(startplane, startdepthnormal);
if (startdist > enddist)
{
// moving into brush
- if (enddist >= collision_enternudge.value)
+ if (enddist > 0.0f)
return;
- if (startdist > 0)
+ if (startdist >= 0)
{
// enter
imove = 1 / (startdist - enddist);
- f = (startdist - collision_enternudge.value) * imove;
- if (f < 0)
- f = 0;
+ f = startdist * imove;
// check if this will reduce the collision time range
if (enterfrac < f)
{
// if the collision time range is now empty, no collision
if (enterfrac > leavefrac)
return;
+ // calculate the nudged fraction and impact normal we'll
+ // need if we accept this collision later
+ enterfrac2 = (startdist - collision_impactnudge.value) * imove;
// if the collision would be further away than the trace's
// existing collision data, we don't care about this
// collision
- if (enterfrac > trace->realfraction)
+ if (enterfrac2 >= trace->fraction)
return;
- // calculate the nudged fraction and impact normal we'll
- // need if we accept this collision later
- enterfrac2 = (startdist - collision_impactnudge.value) * imove;
ie = 1.0f - enterfrac;
newimpactplane[0] = startplane[0] * ie + endplane[0] * enterfrac;
newimpactplane[1] = startplane[1] * ie + endplane[1] * enterfrac;
else
{
// moving out of brush
- if (startdist > 0)
+ if (startdist >= 0)
return;
if (enddist > 0)
{
// leave
- f = (startdist + collision_leavenudge.value) / (startdist - enddist);
- if (f > 1)
- f = 1;
+ f = startdist / (startdist - enddist);
// check if this will reduce the collision time range
if (leavefrac > f)
{
{
// started outside, and overlaps, therefore there is a collision here
// store out the impact information
- if (trace->hitsupercontentsmask & other_start->supercontents)
+ if ((trace->hitsupercontentsmask & other_start->supercontents) && !(trace->skipsupercontentsmask & other_start->supercontents))
{
trace->hitsupercontents = other_start->supercontents;
trace->hitq3surfaceflags = hitq3surfaceflags;
trace->hittexture = hittexture;
- trace->realfraction = bound(0, enterfrac, 1);
trace->fraction = bound(0, enterfrac2, 1);
- if (collision_prefernudgedfraction.integer)
- trace->realfraction = trace->fraction;
VectorCopy(newimpactplane, trace->plane.normal);
trace->plane.dist = newimpactplane[3];
}
{
// started inside, update startsolid and friends
trace->startsupercontents |= other_start->supercontents;
- if (trace->hitsupercontentsmask & other_start->supercontents)
+ if ((trace->hitsupercontentsmask & other_start->supercontents) && !(trace->skipsupercontentsmask & other_start->supercontents))
{
trace->startsolid = true;
if (leavefrac < 1)
vec4_t startplane;
vec4_t endplane;
vec4_t newimpactplane;
- texture_t *hittexture = NULL;
+ const texture_t *hittexture = NULL;
vec_t startdepth = 1;
vec3_t startdepthnormal;
+ if (collision_debug_tracelineasbox.integer)
+ {
+ colboxbrushf_t thisbrush_start, thisbrush_end;
+ Collision_BrushForBox(&thisbrush_start, linestart, linestart, 0, 0, NULL);
+ Collision_BrushForBox(&thisbrush_end, lineend, lineend, 0, 0, NULL);
+ Collision_TraceBrushBrushFloat(trace, &thisbrush_start.brush, &thisbrush_end.brush, other_start, other_end);
+ return;
+ }
+
VectorClear(startdepthnormal);
Vector4Clear(newimpactplane);
startplane[3] = other_start->planes[nplane].dist;
VectorCopy(other_end->planes[nplane].normal, endplane);
endplane[3] = other_end->planes[nplane].dist;
- startdist = DotProduct(linestart, startplane) - startplane[3] - collision_startnudge.value;
- enddist = DotProduct(lineend, endplane) - endplane[3] - collision_endnudge.value;
+ startdist = DotProduct(linestart, startplane) - startplane[3];
+ enddist = DotProduct(lineend, endplane) - endplane[3];
//Con_Printf("%c%i: startdist = %f, enddist = %f, startdist / (startdist - enddist) = %f\n", nplane2 != nplane ? 'b' : 'a', nplane2, startdist, enddist, startdist / (startdist - enddist));
// aside from collisions, this is also used for error correction
- if (startdist < 0 && (startdepth < startdist || startdepth == 1))
+ if (startdist <= 0.0f && (startdepth < startdist || startdepth == 1))
{
startdepth = startdist;
VectorCopy(startplane, startdepthnormal);
if (startdist > enddist)
{
// moving into brush
- if (enddist >= collision_enternudge.value)
+ if (enddist > 0.0f)
return;
if (startdist > 0)
{
// enter
imove = 1 / (startdist - enddist);
- f = (startdist - collision_enternudge.value) * imove;
- if (f < 0)
- f = 0;
+ f = startdist * imove;
// check if this will reduce the collision time range
if (enterfrac < f)
{
// if the collision time range is now empty, no collision
if (enterfrac > leavefrac)
return;
+ // calculate the nudged fraction and impact normal we'll
+ // need if we accept this collision later
+ enterfrac2 = (startdist - collision_impactnudge.value) * imove;
// if the collision would be further away than the trace's
// existing collision data, we don't care about this
// collision
- if (enterfrac > trace->realfraction)
+ if (enterfrac2 >= trace->fraction)
return;
- // calculate the nudged fraction and impact normal we'll
- // need if we accept this collision later
- enterfrac2 = (startdist - collision_impactnudge.value) * imove;
ie = 1.0f - enterfrac;
newimpactplane[0] = startplane[0] * ie + endplane[0] * enterfrac;
newimpactplane[1] = startplane[1] * ie + endplane[1] * enterfrac;
if (enddist > 0)
{
// leave
- f = (startdist + collision_leavenudge.value) / (startdist - enddist);
- if (f > 1)
- f = 1;
+ f = startdist / (startdist - enddist);
// check if this will reduce the collision time range
if (leavefrac > f)
{
{
// started outside, and overlaps, therefore there is a collision here
// store out the impact information
- if (trace->hitsupercontentsmask & other_start->supercontents)
+ if ((trace->hitsupercontentsmask & other_start->supercontents) && !(trace->skipsupercontentsmask & other_start->supercontents))
{
trace->hitsupercontents = other_start->supercontents;
trace->hitq3surfaceflags = hitq3surfaceflags;
trace->hittexture = hittexture;
- trace->realfraction = bound(0, enterfrac, 1);
trace->fraction = bound(0, enterfrac2, 1);
- if (collision_prefernudgedfraction.integer)
- trace->realfraction = trace->fraction;
VectorCopy(newimpactplane, trace->plane.normal);
trace->plane.dist = newimpactplane[3];
}
{
// started inside, update startsolid and friends
trace->startsupercontents |= other_start->supercontents;
- if (trace->hitsupercontentsmask & other_start->supercontents)
+ if ((trace->hitsupercontentsmask & other_start->supercontents) && !(trace->skipsupercontentsmask & other_start->supercontents))
{
trace->startsolid = true;
if (leavefrac < 1)
return;
trace->startsupercontents |= thatbrush->supercontents;
- if (trace->hitsupercontentsmask & thatbrush->supercontents)
+ if ((trace->hitsupercontentsmask & thatbrush->supercontents) && !(trace->skipsupercontentsmask & thatbrush->supercontents))
{
trace->startsolid = true;
trace->allsolid = true;
}
}
-void Collision_SnapCopyPoints(int numpoints, const colpointf_t *in, colpointf_t *out, float fractionprecision, float invfractionprecision)
+static void Collision_SnapCopyPoints(int numpoints, const colpointf_t *in, colpointf_t *out, float fractionprecision, float invfractionprecision)
{
int i;
for (i = 0;i < numpoints;i++)
}
}
-void Collision_TraceBrushTriangleMeshFloat(trace_t *trace, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, int numtriangles, const int *element3i, const float *vertex3f, int stride, float *bbox6f, int supercontents, int q3surfaceflags, texture_t *texture, const vec3_t segmentmins, const vec3_t segmentmaxs)
+void Collision_TraceBrushTriangleMeshFloat(trace_t *trace, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, int numtriangles, const int *element3i, const float *vertex3f, int stride, float *bbox6f, int supercontents, int q3surfaceflags, const texture_t *texture, const vec3_t segmentmins, const vec3_t segmentmaxs)
{
int i;
colpointf_t points[3];
brush.planes[i].q3surfaceflags = q3surfaceflags;
brush.planes[i].texture = texture;
}
- if(stride)
+ if(stride > 0)
{
int k, cnt, tri;
cnt = (numtriangles + stride - 1) / stride;
VectorCopy(vertex3f + element3i[tri * 3 + 2] * 3, points[2].v);
Collision_SnapCopyPoints(brush.numpoints, points, points, COLLISION_SNAPSCALE, COLLISION_SNAP);
Collision_CalcEdgeDirsForPolygonBrushFloat(&brush);
- Collision_CalcPlanesForPolygonBrushFloat(&brush);
+ Collision_CalcPlanesForTriangleBrushFloat(&brush);
//Collision_PrintBrushAsQHull(&brush, "brush");
Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, &brush, &brush);
}
}
}
}
- else
+ else if(stride == 0)
{
for (i = 0;i < numtriangles;i++, element3i += 3)
{
- if (TriangleOverlapsBox(vertex3f + element3i[0]*3, vertex3f + element3i[1]*3, vertex3f + element3i[2]*3, segmentmins, segmentmaxs))
+ if (TriangleBBoxOverlapsBox(vertex3f + element3i[0]*3, vertex3f + element3i[1]*3, vertex3f + element3i[2]*3, segmentmins, segmentmaxs))
{
VectorCopy(vertex3f + element3i[0] * 3, points[0].v);
VectorCopy(vertex3f + element3i[1] * 3, points[1].v);
VectorCopy(vertex3f + element3i[2] * 3, points[2].v);
Collision_SnapCopyPoints(brush.numpoints, points, points, COLLISION_SNAPSCALE, COLLISION_SNAP);
Collision_CalcEdgeDirsForPolygonBrushFloat(&brush);
- Collision_CalcPlanesForPolygonBrushFloat(&brush);
+ Collision_CalcPlanesForTriangleBrushFloat(&brush);
//Collision_PrintBrushAsQHull(&brush, "brush");
Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, &brush, &brush);
}
}
}
+ else
+ {
+ for (i = 0;i < numtriangles;i++, element3i += 3)
+ {
+ VectorCopy(vertex3f + element3i[0] * 3, points[0].v);
+ VectorCopy(vertex3f + element3i[1] * 3, points[1].v);
+ VectorCopy(vertex3f + element3i[2] * 3, points[2].v);
+ Collision_SnapCopyPoints(brush.numpoints, points, points, COLLISION_SNAPSCALE, COLLISION_SNAP);
+ Collision_CalcEdgeDirsForPolygonBrushFloat(&brush);
+ Collision_CalcPlanesForTriangleBrushFloat(&brush);
+ //Collision_PrintBrushAsQHull(&brush, "brush");
+ Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, &brush, &brush);
+ }
+ }
}
-void Collision_TraceLineTriangleMeshFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, int numtriangles, const int *element3i, const float *vertex3f, int stride, float *bbox6f, int supercontents, int q3surfaceflags, texture_t *texture, const vec3_t segmentmins, const vec3_t segmentmaxs)
+void Collision_TraceLineTriangleMeshFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, int numtriangles, const int *element3i, const float *vertex3f, int stride, float *bbox6f, int supercontents, int q3surfaceflags, const texture_t *texture, const vec3_t segmentmins, const vec3_t segmentmaxs)
{
int i;
-#if 1
// FIXME: snap vertices?
- if(stride)
+ if(stride > 0)
{
int k, cnt, tri;
cnt = (numtriangles + stride - 1) / stride;
for (i = 0;i < numtriangles;i++, element3i += 3)
Collision_TraceLineTriangleFloat(trace, linestart, lineend, vertex3f + element3i[0] * 3, vertex3f + element3i[1] * 3, vertex3f + element3i[2] * 3, supercontents, q3surfaceflags, texture);
}
-#else
+}
+
+void Collision_TraceBrushTriangleFloat(trace_t *trace, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, const float *v0, const float *v1, const float *v2, int supercontents, int q3surfaceflags, const texture_t *texture)
+{
+ int i;
colpointf_t points[3];
colpointf_t edgedirs[3];
colplanef_t planes[5];
brush.planes[i].q3surfaceflags = q3surfaceflags;
brush.planes[i].texture = texture;
}
- for (i = 0;i < numtriangles;i++, element3i += 3)
- {
- if (TriangleOverlapsBox(vertex3f + element3i[0]*3, vertex3 + [element3i[1]*3, vertex3f + element3i[2]*3, segmentmins, segmentmaxs))
- {
- VectorCopy(vertex3f + element3i[0] * 3, points[0].v);
- VectorCopy(vertex3f + element3i[1] * 3, points[1].v);
- VectorCopy(vertex3f + element3i[2] * 3, points[2].v);
- Collision_SnapCopyPoints(brush.numpoints, points, points, COLLISION_SNAPSCALE, COLLISION_SNAP);
- Collision_CalcEdgeDirsForPolygonBrushFloat(&brush);
- Collision_CalcPlanesForPolygonBrushFloat(&brush);
- //Collision_PrintBrushAsQHull(&brush, "brush");
- Collision_TraceLineBrushFloat(trace, linestart, lineend, &brush, &brush);
- }
- }
-#endif
+ VectorCopy(v0, points[0].v);
+ VectorCopy(v1, points[1].v);
+ VectorCopy(v2, points[2].v);
+ Collision_SnapCopyPoints(brush.numpoints, points, points, COLLISION_SNAPSCALE, COLLISION_SNAP);
+ Collision_CalcEdgeDirsForPolygonBrushFloat(&brush);
+ Collision_CalcPlanesForTriangleBrushFloat(&brush);
+ //Collision_PrintBrushAsQHull(&brush, "brush");
+ Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, &brush, &brush);
}
-void Collision_BrushForBox(colboxbrushf_t *boxbrush, const vec3_t mins, const vec3_t maxs, int supercontents, int q3surfaceflags, texture_t *texture)
+void Collision_BrushForBox(colboxbrushf_t *boxbrush, const vec3_t mins, const vec3_t maxs, int supercontents, int q3surfaceflags, const texture_t *texture)
{
int i;
memset(boxbrush, 0, sizeof(*boxbrush));
boxbrush->brush.texture = texture;
VectorSet(boxbrush->brush.mins, mins[0] - 1, mins[1] - 1, mins[2] - 1);
VectorSet(boxbrush->brush.maxs, maxs[0] + 1, maxs[1] + 1, maxs[2] + 1);
- Collision_ValidateBrush(&boxbrush->brush);
-}
-
-void Collision_ClipTrace_BrushBox(trace_t *trace, const vec3_t cmins, const vec3_t cmaxs, const vec3_t start, const vec3_t mins, const vec3_t maxs, const vec3_t end, int hitsupercontentsmask, int supercontents, int q3surfaceflags, texture_t *texture)
-{
- colboxbrushf_t boxbrush, thisbrush_start, thisbrush_end;
- vec3_t startmins, startmaxs, endmins, endmaxs;
-
- // create brushes for the collision
- VectorAdd(start, mins, startmins);
- VectorAdd(start, maxs, startmaxs);
- VectorAdd(end, mins, endmins);
- VectorAdd(end, maxs, endmaxs);
- Collision_BrushForBox(&boxbrush, cmins, cmaxs, supercontents, q3surfaceflags, texture);
- Collision_BrushForBox(&thisbrush_start, startmins, startmaxs, 0, 0, NULL);
- Collision_BrushForBox(&thisbrush_end, endmins, endmaxs, 0, 0, NULL);
-
- memset(trace, 0, sizeof(trace_t));
- trace->hitsupercontentsmask = hitsupercontentsmask;
- trace->fraction = 1;
- trace->realfraction = 1;
- trace->allsolid = true;
- Collision_TraceBrushBrushFloat(trace, &thisbrush_start.brush, &thisbrush_end.brush, &boxbrush.brush, &boxbrush.brush);
+ //Collision_ValidateBrush(&boxbrush->brush);
}
//pseudocode for detecting line/sphere overlap without calculating an impact point
// all the results are correct (impactpoint, impactnormal, and fraction)
float Collision_ClipTrace_Line_Sphere(double *linestart, double *lineend, double *sphereorigin, double sphereradius, double *impactpoint, double *impactnormal)
{
- double dir[3], scale, v[3], deviationdist, impactdist, linelength;
+ double dir[3], scale, v[3], deviationdist2, impactdist, linelength;
// make sure the impactpoint and impactnormal are valid even if there is
// no collision
VectorCopy(lineend, impactpoint);
// of the line from the sphereorigin (deviation, how off-center it is)
VectorMA(linestart, impactdist, dir, v);
VectorSubtract(v, sphereorigin, v);
- deviationdist = VectorLength2(v);
- // if outside the radius, it's a miss for sure
- // (we do this comparison using squared radius to avoid a sqrt)
- if (deviationdist > sphereradius*sphereradius)
+ deviationdist2 = sphereradius * sphereradius - VectorLength2(v);
+ // if squared offset length is outside the squared sphere radius, miss
+ if (deviationdist2 < 0)
return 1; // miss (off to the side)
// nudge back to find the correct impact distance
- impactdist -= sphereradius - deviationdist/sphereradius;
+ impactdist -= sqrt(deviationdist2);
if (impactdist >= linelength)
return 1; // miss (not close enough)
if (impactdist < 0)
return impactdist / linelength;
}
-void Collision_TraceLineTriangleFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, const float *point0, const float *point1, const float *point2, int supercontents, int q3surfaceflags, texture_t *texture)
+void Collision_TraceLineTriangleFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, const float *point0, const float *point1, const float *point2, int supercontents, int q3surfaceflags, const texture_t *texture)
{
-#if 1
- // more optimized
- float d1, d2, d, f, impact[3], edgenormal[3], faceplanenormal[3], faceplanedist, faceplanenormallength2, edge01[3], edge21[3], edge02[3];
+ float d1, d2, d, f, f2, impact[3], edgenormal[3], faceplanenormal[3], faceplanedist, faceplanenormallength2, edge01[3], edge21[3], edge02[3];
// this function executes:
// 32 ops when line starts behind triangle
// and subtracting the face plane distance (this is the distance of the
// triangle along that same normal)
// then multiply by the recipricol distance delta
- // 2 ops
+ // 4 ops
f = (d1 - faceplanedist) * d;
+ f2 = f - collision_impactnudge.value * d;
// skip out if this impact is further away than previous ones
// 1 ops
- if (f > trace->realfraction)
+ if (f2 >= trace->fraction)
return;
// calculate the perfect impact point for classification of insidedness
// 9 ops
// 8 ops (rare)
- // store the new trace fraction
- trace->realfraction = f;
-
- // calculate a nudged fraction to keep it out of the surface
- // (the main fraction remains perfect)
- trace->fraction = f - collision_impactnudge.value * d;
+ // skip if this trace should not be blocked by these contents
+ if (!(supercontents & trace->hitsupercontentsmask) || (supercontents & trace->skipsupercontentsmask))
+ return;
- if (collision_prefernudgedfraction.integer)
- trace->realfraction = trace->fraction;
+ // store the new trace fraction
+ trace->fraction = f2;
// store the new trace plane (because collisions only happen from
// the front this is always simply the triangle normal, never flipped)
trace->hitsupercontents = supercontents;
trace->hitq3surfaceflags = q3surfaceflags;
trace->hittexture = texture;
-#else
- float d1, d2, d, f, fnudged, impact[3], edgenormal[3], faceplanenormal[3], faceplanedist, edge[3];
-
- // this code is designed for clockwise triangles, conversion to
- // counterclockwise would require swapping some things around...
- // it is easier to simply swap the point0 and point2 parameters to this
- // function when calling it than it is to rewire the internals.
-
- // calculate the unnormalized faceplanenormal of the triangle,
- // this represents the front side
- TriangleNormal(point0, point1, point2, faceplanenormal);
- // there's no point in processing a degenerate triangle
- // (GIGO - Garbage In, Garbage Out)
- if (DotProduct(faceplanenormal, faceplanenormal) < 0.0001f)
- return;
- // calculate the unnormalized distance
- faceplanedist = DotProduct(point0, faceplanenormal);
-
- // calculate the unnormalized start distance
- d1 = DotProduct(faceplanenormal, linestart) - faceplanedist;
- // if start point is on the back side there is no collision
- // (we don't care about traces going through the triangle the wrong way)
- if (d1 <= 0)
- return;
-
- // calculate the unnormalized end distance
- d2 = DotProduct(faceplanenormal, lineend) - faceplanedist;
- // if both are in front, there is no collision
- if (d2 >= 0)
- return;
-
- // from here on we know d1 is >= 0 and d2 is < 0
- // this means the line starts infront and ends behind, passing through it
-
- // calculate the recipricol of the distance delta,
- // so we can use it multiple times cheaply (instead of division)
- d = 1.0f / (d1 - d2);
- // calculate the impact fraction by taking the start distance (> 0)
- // and subtracting the face plane distance (this is the distance of the
- // triangle along that same normal)
- // then multiply by the recipricol distance delta
- f = d1 * d;
- // skip out if this impact is further away than previous ones
- if (f > trace->realfraction)
- return;
- // calculate the perfect impact point for classification of insidedness
- impact[0] = linestart[0] + f * (lineend[0] - linestart[0]);
- impact[1] = linestart[1] + f * (lineend[1] - linestart[1]);
- impact[2] = linestart[2] + f * (lineend[2] - linestart[2]);
-
- // calculate the edge normal and reject if impact is outside triangle
- // (an edge normal faces away from the triangle, to get the desired normal
- // a crossproduct with the faceplanenormal is used, and because of the way
- // the insidedness comparison is written it does not need to be normalized)
-
- VectorSubtract(point2, point0, edge);
- CrossProduct(edge, faceplanenormal, edgenormal);
- if (DotProduct(impact, edgenormal) > DotProduct(point0, edgenormal))
- return;
-
- VectorSubtract(point0, point1, edge);
- CrossProduct(edge, faceplanenormal, edgenormal);
- if (DotProduct(impact, edgenormal) > DotProduct(point1, edgenormal))
- return;
-
- VectorSubtract(point1, point2, edge);
- CrossProduct(edge, faceplanenormal, edgenormal);
- if (DotProduct(impact, edgenormal) > DotProduct(point2, edgenormal))
- return;
-
- // store the new trace fraction
- trace->realfraction = bound(0, f, 1);
-
- // store the new trace plane (because collisions only happen from
- // the front this is always simply the triangle normal, never flipped)
- VectorNormalize(faceplanenormal);
- VectorCopy(faceplanenormal, trace->plane.normal);
- trace->plane.dist = DotProduct(point0, faceplanenormal);
-
- // calculate the normalized start and end distances
- d1 = DotProduct(trace->plane.normal, linestart) - trace->plane.dist;
- d2 = DotProduct(trace->plane.normal, lineend) - trace->plane.dist;
-
- // calculate a nudged fraction to keep it out of the surface
- // (the main fraction remains perfect)
- fnudged = (d1 - collision_impactnudge.value) / (d1 - d2);
- trace->fraction = bound(0, fnudged, 1);
-
- // store the new trace endpos
- // not needed, it's calculated later when the trace is finished
- //trace->endpos[0] = linestart[0] + fnudged * (lineend[0] - linestart[0]);
- //trace->endpos[1] = linestart[1] + fnudged * (lineend[1] - linestart[1]);
- //trace->endpos[2] = linestart[2] + fnudged * (lineend[2] - linestart[2]);
- trace->hitsupercontents = supercontents;
- trace->hitq3surfaceflags = q3surfaceflags;
- trace->hittexture = texture;
-#endif
-}
-
-typedef struct colbspnode_s
-{
- mplane_t plane;
- struct colbspnode_s *children[2];
- // the node is reallocated or split if max is reached
- int numcolbrushf;
- int maxcolbrushf;
- colbrushf_t **colbrushflist;
- //int numcolbrushd;
- //int maxcolbrushd;
- //colbrushd_t **colbrushdlist;
-}
-colbspnode_t;
-
-typedef struct colbsp_s
-{
- mempool_t *mempool;
- colbspnode_t *nodes;
-}
-colbsp_t;
-
-colbsp_t *Collision_CreateCollisionBSP(mempool_t *mempool)
-{
- colbsp_t *bsp;
- bsp = (colbsp_t *)Mem_Alloc(mempool, sizeof(colbsp_t));
- bsp->mempool = mempool;
- bsp->nodes = (colbspnode_t *)Mem_Alloc(bsp->mempool, sizeof(colbspnode_t));
- return bsp;
-}
-
-void Collision_FreeCollisionBSPNode(colbspnode_t *node)
-{
- if (node->children[0])
- Collision_FreeCollisionBSPNode(node->children[0]);
- if (node->children[1])
- Collision_FreeCollisionBSPNode(node->children[1]);
- while (--node->numcolbrushf)
- Mem_Free(node->colbrushflist[node->numcolbrushf]);
- //while (--node->numcolbrushd)
- // Mem_Free(node->colbrushdlist[node->numcolbrushd]);
- Mem_Free(node);
-}
-
-void Collision_FreeCollisionBSP(colbsp_t *bsp)
-{
- Collision_FreeCollisionBSPNode(bsp->nodes);
- Mem_Free(bsp);
}
void Collision_BoundingBoxOfBrushTraceSegment(const colbrushf_t *start, const colbrushf_t *end, vec3_t mins, vec3_t maxs, float startfrac, float endfrac)
//===========================================
-void Collision_ClipToGenericEntity(trace_t *trace, dp_model_t *model, int frame, const vec3_t bodymins, const vec3_t bodymaxs, int bodysupercontents, matrix4x4_t *matrix, matrix4x4_t *inversematrix, const vec3_t start, const vec3_t mins, const vec3_t maxs, const vec3_t end, int hitsupercontentsmask)
+static void Collision_TranslateBrush(const vec3_t shift, colbrushf_t *brush)
+{
+ int i;
+ // now we can transform the data
+ for(i = 0; i < brush->numplanes; ++i)
+ {
+ brush->planes[i].dist += DotProduct(shift, brush->planes[i].normal);
+ }
+ for(i = 0; i < brush->numpoints; ++i)
+ {
+ VectorAdd(brush->points[i].v, shift, brush->points[i].v);
+ }
+ VectorAdd(brush->mins, shift, brush->mins);
+ VectorAdd(brush->maxs, shift, brush->maxs);
+}
+
+static void Collision_TransformBrush(const matrix4x4_t *matrix, colbrushf_t *brush)
+{
+ int i;
+ vec3_t v;
+ // we're breaking any AABB properties here...
+ brush->isaabb = false;
+ brush->hasaabbplanes = false;
+ // now we can transform the data
+ for(i = 0; i < brush->numplanes; ++i)
+ {
+ Matrix4x4_TransformPositivePlane(matrix, brush->planes[i].normal[0], brush->planes[i].normal[1], brush->planes[i].normal[2], brush->planes[i].dist, brush->planes[i].normal_and_dist);
+ }
+ for(i = 0; i < brush->numedgedirs; ++i)
+ {
+ Matrix4x4_Transform(matrix, brush->edgedirs[i].v, v);
+ VectorCopy(v, brush->edgedirs[i].v);
+ }
+ for(i = 0; i < brush->numpoints; ++i)
+ {
+ Matrix4x4_Transform(matrix, brush->points[i].v, v);
+ VectorCopy(v, brush->points[i].v);
+ }
+ VectorCopy(brush->points[0].v, brush->mins);
+ VectorCopy(brush->points[0].v, brush->maxs);
+ for(i = 1; i < brush->numpoints; ++i)
+ {
+ if(brush->points[i].v[0] < brush->mins[0]) brush->mins[0] = brush->points[i].v[0];
+ if(brush->points[i].v[1] < brush->mins[1]) brush->mins[1] = brush->points[i].v[1];
+ if(brush->points[i].v[2] < brush->mins[2]) brush->mins[2] = brush->points[i].v[2];
+ if(brush->points[i].v[0] > brush->maxs[0]) brush->maxs[0] = brush->points[i].v[0];
+ if(brush->points[i].v[1] > brush->maxs[1]) brush->maxs[1] = brush->points[i].v[1];
+ if(brush->points[i].v[2] > brush->maxs[2]) brush->maxs[2] = brush->points[i].v[2];
+ }
+}
+
+typedef struct collision_cachedtrace_parameters_s
+{
+ dp_model_t *model;
+ vec3_t end;
+ vec3_t start;
+ int hitsupercontentsmask;
+ int skipsupercontentsmask;
+ matrix4x4_t matrix;
+}
+collision_cachedtrace_parameters_t;
+
+typedef struct collision_cachedtrace_s
+{
+ qboolean valid;
+ collision_cachedtrace_parameters_t p;
+ trace_t result;
+}
+collision_cachedtrace_t;
+
+static mempool_t *collision_cachedtrace_mempool;
+static collision_cachedtrace_t *collision_cachedtrace_array;
+static int collision_cachedtrace_firstfree;
+static int collision_cachedtrace_lastused;
+static int collision_cachedtrace_max;
+static unsigned char collision_cachedtrace_sequence;
+static int collision_cachedtrace_hashsize;
+static int *collision_cachedtrace_hash;
+static unsigned int *collision_cachedtrace_arrayfullhashindex;
+static unsigned int *collision_cachedtrace_arrayhashindex;
+static unsigned int *collision_cachedtrace_arraynext;
+static unsigned char *collision_cachedtrace_arrayused;
+static qboolean collision_cachedtrace_rebuildhash;
+
+void Collision_Cache_Reset(qboolean resetlimits)
+{
+ if (collision_cachedtrace_hash)
+ Mem_Free(collision_cachedtrace_hash);
+ if (collision_cachedtrace_array)
+ Mem_Free(collision_cachedtrace_array);
+ if (collision_cachedtrace_arrayfullhashindex)
+ Mem_Free(collision_cachedtrace_arrayfullhashindex);
+ if (collision_cachedtrace_arrayhashindex)
+ Mem_Free(collision_cachedtrace_arrayhashindex);
+ if (collision_cachedtrace_arraynext)
+ Mem_Free(collision_cachedtrace_arraynext);
+ if (collision_cachedtrace_arrayused)
+ Mem_Free(collision_cachedtrace_arrayused);
+ if (resetlimits || !collision_cachedtrace_max)
+ collision_cachedtrace_max = collision_cache.integer ? 128 : 1;
+ collision_cachedtrace_firstfree = 1;
+ collision_cachedtrace_lastused = 0;
+ collision_cachedtrace_hashsize = collision_cachedtrace_max;
+ collision_cachedtrace_array = (collision_cachedtrace_t *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_max * sizeof(collision_cachedtrace_t));
+ collision_cachedtrace_hash = (int *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_hashsize * sizeof(int));
+ collision_cachedtrace_arrayfullhashindex = (unsigned int *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_max * sizeof(unsigned int));
+ collision_cachedtrace_arrayhashindex = (unsigned int *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_max * sizeof(unsigned int));
+ collision_cachedtrace_arraynext = (unsigned int *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_max * sizeof(unsigned int));
+ collision_cachedtrace_arrayused = (unsigned char *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_max * sizeof(unsigned char));
+ collision_cachedtrace_sequence = 1;
+ collision_cachedtrace_rebuildhash = false;
+}
+
+void Collision_Cache_Init(mempool_t *mempool)
+{
+ collision_cachedtrace_mempool = mempool;
+ Collision_Cache_Reset(true);
+}
+
+static void Collision_Cache_RebuildHash(void)
+{
+ int index;
+ int range = collision_cachedtrace_lastused + 1;
+ unsigned char sequence = collision_cachedtrace_sequence;
+ int firstfree = collision_cachedtrace_max;
+ int lastused = 0;
+ int *hash = collision_cachedtrace_hash;
+ unsigned int hashindex;
+ unsigned int *arrayhashindex = collision_cachedtrace_arrayhashindex;
+ unsigned int *arraynext = collision_cachedtrace_arraynext;
+ collision_cachedtrace_rebuildhash = false;
+ memset(collision_cachedtrace_hash, 0, collision_cachedtrace_hashsize * sizeof(int));
+ for (index = 1;index < range;index++)
+ {
+ if (collision_cachedtrace_arrayused[index] == sequence)
+ {
+ hashindex = arrayhashindex[index];
+ arraynext[index] = hash[hashindex];
+ hash[hashindex] = index;
+ lastused = index;
+ }
+ else
+ {
+ if (firstfree > index)
+ firstfree = index;
+ collision_cachedtrace_arrayused[index] = 0;
+ }
+ }
+ collision_cachedtrace_firstfree = firstfree;
+ collision_cachedtrace_lastused = lastused;
+}
+
+void Collision_Cache_NewFrame(void)
+{
+ if (collision_cache.integer)
+ {
+ if (collision_cachedtrace_max < 128)
+ Collision_Cache_Reset(true);
+ }
+ else
+ {
+ if (collision_cachedtrace_max > 1)
+ Collision_Cache_Reset(true);
+ }
+ // rebuild hash if sequence would overflow byte, otherwise increment
+ if (collision_cachedtrace_sequence == 255)
+ {
+ Collision_Cache_RebuildHash();
+ collision_cachedtrace_sequence = 1;
+ }
+ else
+ {
+ collision_cachedtrace_rebuildhash = true;
+ collision_cachedtrace_sequence++;
+ }
+}
+
+static unsigned int Collision_Cache_HashIndexForArray(unsigned int *array, unsigned int size)
{
- float starttransformed[3], endtransformed[3];
+ unsigned int i;
+ unsigned int hashindex = 0;
+ // this is a super-cheesy checksum, designed only for speed
+ for (i = 0;i < size;i++)
+ hashindex += array[i] * (1 + i);
+ return hashindex;
+}
+static collision_cachedtrace_t *Collision_Cache_Lookup(dp_model_t *model, const matrix4x4_t *matrix, const matrix4x4_t *inversematrix, const vec3_t start, const vec3_t end, int hitsupercontentsmask, int skipsupercontentsmask)
+{
+ int hashindex = 0;
+ unsigned int fullhashindex;
+ int index = 0;
+ int range;
+ unsigned char sequence = collision_cachedtrace_sequence;
+ int *hash = collision_cachedtrace_hash;
+ unsigned int *arrayfullhashindex = collision_cachedtrace_arrayfullhashindex;
+ unsigned int *arraynext = collision_cachedtrace_arraynext;
+ collision_cachedtrace_t *cached = collision_cachedtrace_array + index;
+ collision_cachedtrace_parameters_t params;
+ // all non-cached traces use the same index
+ if (!collision_cache.integer)
+ r_refdef.stats[r_stat_photoncache_traced]++;
+ else
+ {
+ // cached trace lookup
+ memset(¶ms, 0, sizeof(params));
+ params.model = model;
+ VectorCopy(start, params.start);
+ VectorCopy(end, params.end);
+ params.hitsupercontentsmask = hitsupercontentsmask;
+ params.skipsupercontentsmask = skipsupercontentsmask;
+ params.matrix = *matrix;
+ fullhashindex = Collision_Cache_HashIndexForArray((unsigned int *)¶ms, sizeof(params) / sizeof(unsigned int));
+ hashindex = (int)(fullhashindex % (unsigned int)collision_cachedtrace_hashsize);
+ for (index = hash[hashindex];index;index = arraynext[index])
+ {
+ if (arrayfullhashindex[index] != fullhashindex)
+ continue;
+ cached = collision_cachedtrace_array + index;
+ //if (memcmp(&cached->p, ¶ms, sizeof(params)))
+ if (cached->p.model != params.model
+ || cached->p.end[0] != params.end[0]
+ || cached->p.end[1] != params.end[1]
+ || cached->p.end[2] != params.end[2]
+ || cached->p.start[0] != params.start[0]
+ || cached->p.start[1] != params.start[1]
+ || cached->p.start[2] != params.start[2]
+ || cached->p.hitsupercontentsmask != params.hitsupercontentsmask
+ || cached->p.skipsupercontentsmask != params.skipsupercontentsmask
+ || cached->p.matrix.m[0][0] != params.matrix.m[0][0]
+ || cached->p.matrix.m[0][1] != params.matrix.m[0][1]
+ || cached->p.matrix.m[0][2] != params.matrix.m[0][2]
+ || cached->p.matrix.m[0][3] != params.matrix.m[0][3]
+ || cached->p.matrix.m[1][0] != params.matrix.m[1][0]
+ || cached->p.matrix.m[1][1] != params.matrix.m[1][1]
+ || cached->p.matrix.m[1][2] != params.matrix.m[1][2]
+ || cached->p.matrix.m[1][3] != params.matrix.m[1][3]
+ || cached->p.matrix.m[2][0] != params.matrix.m[2][0]
+ || cached->p.matrix.m[2][1] != params.matrix.m[2][1]
+ || cached->p.matrix.m[2][2] != params.matrix.m[2][2]
+ || cached->p.matrix.m[2][3] != params.matrix.m[2][3]
+ || cached->p.matrix.m[3][0] != params.matrix.m[3][0]
+ || cached->p.matrix.m[3][1] != params.matrix.m[3][1]
+ || cached->p.matrix.m[3][2] != params.matrix.m[3][2]
+ || cached->p.matrix.m[3][3] != params.matrix.m[3][3]
+ )
+ continue;
+ // found a matching trace in the cache
+ r_refdef.stats[r_stat_photoncache_cached]++;
+ cached->valid = true;
+ collision_cachedtrace_arrayused[index] = collision_cachedtrace_sequence;
+ return cached;
+ }
+ r_refdef.stats[r_stat_photoncache_traced]++;
+ // find an unused cache entry
+ for (index = collision_cachedtrace_firstfree, range = collision_cachedtrace_max;index < range;index++)
+ if (collision_cachedtrace_arrayused[index] == 0)
+ break;
+ if (index == range)
+ {
+ // all claimed, but probably some are stale...
+ for (index = 1, range = collision_cachedtrace_max;index < range;index++)
+ if (collision_cachedtrace_arrayused[index] != sequence)
+ break;
+ if (index < range)
+ {
+ // found a stale one, rebuild the hash
+ Collision_Cache_RebuildHash();
+ }
+ else
+ {
+ // we need to grow the cache
+ collision_cachedtrace_max *= 2;
+ Collision_Cache_Reset(false);
+ index = 1;
+ }
+ }
+ // link the new cache entry into the hash bucket
+ collision_cachedtrace_firstfree = index + 1;
+ if (collision_cachedtrace_lastused < index)
+ collision_cachedtrace_lastused = index;
+ cached = collision_cachedtrace_array + index;
+ collision_cachedtrace_arraynext[index] = collision_cachedtrace_hash[hashindex];
+ collision_cachedtrace_hash[hashindex] = index;
+ collision_cachedtrace_arrayhashindex[index] = hashindex;
+ cached->valid = false;
+ cached->p = params;
+ collision_cachedtrace_arrayfullhashindex[index] = fullhashindex;
+ collision_cachedtrace_arrayused[index] = collision_cachedtrace_sequence;
+ }
+ return cached;
+}
+
+void Collision_Cache_ClipLineToGenericEntitySurfaces(trace_t *trace, dp_model_t *model, matrix4x4_t *matrix, matrix4x4_t *inversematrix, const vec3_t start, const vec3_t end, int hitsupercontentsmask, int skipsupercontentsmask)
+{
+ collision_cachedtrace_t *cached = Collision_Cache_Lookup(model, matrix, inversematrix, start, end, hitsupercontentsmask, skipsupercontentsmask);
+ if (cached->valid)
+ {
+ *trace = cached->result;
+ return;
+ }
+
+ Collision_ClipLineToGenericEntity(trace, model, NULL, NULL, vec3_origin, vec3_origin, 0, matrix, inversematrix, start, end, hitsupercontentsmask, skipsupercontentsmask, collision_extendmovelength.value, true);
+
+ cached->result = *trace;
+}
+
+void Collision_Cache_ClipLineToWorldSurfaces(trace_t *trace, dp_model_t *model, const vec3_t start, const vec3_t end, int hitsupercontentsmask, int skipsupercontentsmask)
+{
+ collision_cachedtrace_t *cached = Collision_Cache_Lookup(model, &identitymatrix, &identitymatrix, start, end, hitsupercontentsmask, skipsupercontentsmask);
+ if (cached->valid)
+ {
+ *trace = cached->result;
+ return;
+ }
+
+ Collision_ClipLineToWorld(trace, model, start, end, hitsupercontentsmask, skipsupercontentsmask, collision_extendmovelength.value, true);
+
+ cached->result = *trace;
+}
+
+typedef struct extendtraceinfo_s
+{
+ trace_t *trace;
+ float realstart[3];
+ float realend[3];
+ float realdelta[3];
+ float extendstart[3];
+ float extendend[3];
+ float extenddelta[3];
+ float reallength;
+ float extendlength;
+ float scaletoextend;
+ float extend;
+}
+extendtraceinfo_t;
+
+static void Collision_ClipExtendPrepare(extendtraceinfo_t *extendtraceinfo, trace_t *trace, const vec3_t tstart, const vec3_t tend, float textend)
+{
memset(trace, 0, sizeof(*trace));
- trace->fraction = trace->realfraction = 1;
+ trace->fraction = 1;
- Matrix4x4_Transform(inversematrix, start, starttransformed);
- Matrix4x4_Transform(inversematrix, end, endtransformed);
+ extendtraceinfo->trace = trace;
+ VectorCopy(tstart, extendtraceinfo->realstart);
+ VectorCopy(tend, extendtraceinfo->realend);
+ VectorSubtract(extendtraceinfo->realend, extendtraceinfo->realstart, extendtraceinfo->realdelta);
+ VectorCopy(extendtraceinfo->realstart, extendtraceinfo->extendstart);
+ VectorCopy(extendtraceinfo->realend, extendtraceinfo->extendend);
+ VectorCopy(extendtraceinfo->realdelta, extendtraceinfo->extenddelta);
+ extendtraceinfo->reallength = VectorLength(extendtraceinfo->realdelta);
+ extendtraceinfo->extendlength = extendtraceinfo->reallength;
+ extendtraceinfo->scaletoextend = 1.0f;
+ extendtraceinfo->extend = textend;
+
+ // make the trace longer according to the extend parameter
+ if (extendtraceinfo->reallength && extendtraceinfo->extend)
+ {
+ extendtraceinfo->extendlength = extendtraceinfo->reallength + extendtraceinfo->extend;
+ extendtraceinfo->scaletoextend = extendtraceinfo->extendlength / extendtraceinfo->reallength;
+ VectorMA(extendtraceinfo->realstart, extendtraceinfo->scaletoextend, extendtraceinfo->realdelta, extendtraceinfo->extendend);
+ VectorSubtract(extendtraceinfo->extendend, extendtraceinfo->extendstart, extendtraceinfo->extenddelta);
+ }
+}
+
+static void Collision_ClipExtendFinish(extendtraceinfo_t *extendtraceinfo)
+{
+ trace_t *trace = extendtraceinfo->trace;
+
+ if (trace->fraction != 1.0f)
+ {
+ // undo the extended trace length
+ trace->fraction *= extendtraceinfo->scaletoextend;
+
+ // if the extended trace hit something that the unextended trace did not hit (even considering the collision_impactnudge), then we have to clear the hit information
+ if (trace->fraction > 1.0f)
+ {
+ // note that ent may refer to either startsolid or fraction<1, we can't restore the startsolid ent unfortunately
+ trace->ent = NULL;
+ trace->hitq3surfaceflags = 0;
+ trace->hitsupercontents = 0;
+ trace->hittexture = NULL;
+ VectorClear(trace->plane.normal);
+ trace->plane.dist = 0.0f;
+ }
+ }
+
+ // clamp things
+ trace->fraction = bound(0, trace->fraction, 1);
+
+ // calculate the end position
+ VectorMA(extendtraceinfo->realstart, trace->fraction, extendtraceinfo->realdelta, trace->endpos);
+}
+
+void Collision_ClipToGenericEntity(trace_t *trace, dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, const vec3_t bodymins, const vec3_t bodymaxs, int bodysupercontents, matrix4x4_t *matrix, matrix4x4_t *inversematrix, const vec3_t tstart, const vec3_t mins, const vec3_t maxs, const vec3_t tend, int hitsupercontentsmask, int skipsupercontentsmask, float extend)
+{
+ vec3_t starttransformed, endtransformed;
+ extendtraceinfo_t extendtraceinfo;
+ Collision_ClipExtendPrepare(&extendtraceinfo, trace, tstart, tend, extend);
+
+ Matrix4x4_Transform(inversematrix, extendtraceinfo.extendstart, starttransformed);
+ Matrix4x4_Transform(inversematrix, extendtraceinfo.extendend, endtransformed);
#if COLLISIONPARANOID >= 3
- Con_Printf("trans(%f %f %f -> %f %f %f, %f %f %f -> %f %f %f)", start[0], start[1], start[2], starttransformed[0], starttransformed[1], starttransformed[2], end[0], end[1], end[2], endtransformed[0], endtransformed[1], endtransformed[2]);
+ Con_Printf("trans(%f %f %f -> %f %f %f, %f %f %f -> %f %f %f)", extendtraceinfo.extendstart[0], extendtraceinfo.extendstart[1], extendtraceinfo.extendstart[2], starttransformed[0], starttransformed[1], starttransformed[2], extendtraceinfo.extendend[0], extendtraceinfo.extendend[1], extendtraceinfo.extendend[2], endtransformed[0], endtransformed[1], endtransformed[2]);
#endif
if (model && model->TraceBox)
- model->TraceBox(model, bound(0, frame, (model->numframes - 1)), trace, starttransformed, mins, maxs, endtransformed, hitsupercontentsmask);
- else
- Collision_ClipTrace_Box(trace, bodymins, bodymaxs, starttransformed, mins, maxs, endtransformed, hitsupercontentsmask, bodysupercontents, 0, NULL);
- trace->fraction = bound(0, trace->fraction, 1);
- trace->realfraction = bound(0, trace->realfraction, 1);
+ {
+ if(model->TraceBrush && (inversematrix->m[0][1] || inversematrix->m[0][2] || inversematrix->m[1][0] || inversematrix->m[1][2] || inversematrix->m[2][0] || inversematrix->m[2][1]))
+ {
+ // we get here if TraceBrush exists, AND we have a rotation component (SOLID_BSP case)
+ // using starttransformed, endtransformed is WRONG in this case!
+ // should rather build a brush and trace using it
+ colboxbrushf_t thisbrush_start, thisbrush_end;
+ Collision_BrushForBox(&thisbrush_start, mins, maxs, 0, 0, NULL);
+ Collision_BrushForBox(&thisbrush_end, mins, maxs, 0, 0, NULL);
+ Collision_TranslateBrush(extendtraceinfo.extendstart, &thisbrush_start.brush);
+ Collision_TranslateBrush(extendtraceinfo.extendend, &thisbrush_end.brush);
+ Collision_TransformBrush(inversematrix, &thisbrush_start.brush);
+ Collision_TransformBrush(inversematrix, &thisbrush_end.brush);
+ //Collision_TranslateBrush(starttransformed, &thisbrush_start.brush);
+ //Collision_TranslateBrush(endtransformed, &thisbrush_end.brush);
+ model->TraceBrush(model, frameblend, skeleton, trace, &thisbrush_start.brush, &thisbrush_end.brush, hitsupercontentsmask, skipsupercontentsmask);
+ }
+ else // this is only approximate if rotated, quite useless
+ model->TraceBox(model, frameblend, skeleton, trace, starttransformed, mins, maxs, endtransformed, hitsupercontentsmask, skipsupercontentsmask);
+ }
+ else // and this requires that the transformation matrix doesn't have angles components, like SV_TraceBox ensures; FIXME may get called if a model is SOLID_BSP but has no TraceBox function
+ Collision_ClipTrace_Box(trace, bodymins, bodymaxs, starttransformed, mins, maxs, endtransformed, hitsupercontentsmask, skipsupercontentsmask, bodysupercontents, 0, NULL);
+
+ Collision_ClipExtendFinish(&extendtraceinfo);
- VectorLerp(start, trace->fraction, end, trace->endpos);
// transform plane
// NOTE: this relies on plane.dist being directly after plane.normal
- Matrix4x4_TransformPositivePlane(matrix, trace->plane.normal[0], trace->plane.normal[1], trace->plane.normal[2], trace->plane.dist, trace->plane.normal);
+ Matrix4x4_TransformPositivePlane(matrix, trace->plane.normal[0], trace->plane.normal[1], trace->plane.normal[2], trace->plane.dist, trace->plane.normal_and_dist);
}
-void Collision_ClipToWorld(trace_t *trace, dp_model_t *model, const vec3_t start, const vec3_t mins, const vec3_t maxs, const vec3_t end, int hitsupercontents)
+void Collision_ClipToWorld(trace_t *trace, dp_model_t *model, const vec3_t tstart, const vec3_t mins, const vec3_t maxs, const vec3_t tend, int hitsupercontentsmask, int skipsupercontentsmask, float extend)
{
- memset(trace, 0, sizeof(*trace));
- trace->fraction = trace->realfraction = 1;
+ extendtraceinfo_t extendtraceinfo;
+ Collision_ClipExtendPrepare(&extendtraceinfo, trace, tstart, tend, extend);
+ // ->TraceBox: TraceBrush not needed here, as worldmodel is never rotated
if (model && model->TraceBox)
- model->TraceBox(model, 0, trace, start, mins, maxs, end, hitsupercontents);
- trace->fraction = bound(0, trace->fraction, 1);
- trace->realfraction = bound(0, trace->realfraction, 1);
- VectorLerp(start, trace->fraction, end, trace->endpos);
+ model->TraceBox(model, NULL, NULL, trace, extendtraceinfo.extendstart, mins, maxs, extendtraceinfo.extendend, hitsupercontentsmask, skipsupercontentsmask);
+ Collision_ClipExtendFinish(&extendtraceinfo);
}
-void Collision_ClipLineToGenericEntity(trace_t *trace, dp_model_t *model, int frame, const vec3_t bodymins, const vec3_t bodymaxs, int bodysupercontents, matrix4x4_t *matrix, matrix4x4_t *inversematrix, const vec3_t start, const vec3_t end, int hitsupercontentsmask)
+void Collision_ClipLineToGenericEntity(trace_t *trace, dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, const vec3_t bodymins, const vec3_t bodymaxs, int bodysupercontents, matrix4x4_t *matrix, matrix4x4_t *inversematrix, const vec3_t tstart, const vec3_t tend, int hitsupercontentsmask, int skipsupercontentsmask, float extend, qboolean hitsurfaces)
{
- float starttransformed[3], endtransformed[3];
-
- memset(trace, 0, sizeof(*trace));
- trace->fraction = trace->realfraction = 1;
+ vec3_t starttransformed, endtransformed;
+ extendtraceinfo_t extendtraceinfo;
+ Collision_ClipExtendPrepare(&extendtraceinfo, trace, tstart, tend, extend);
- Matrix4x4_Transform(inversematrix, start, starttransformed);
- Matrix4x4_Transform(inversematrix, end, endtransformed);
+ Matrix4x4_Transform(inversematrix, extendtraceinfo.extendstart, starttransformed);
+ Matrix4x4_Transform(inversematrix, extendtraceinfo.extendend, endtransformed);
#if COLLISIONPARANOID >= 3
- Con_Printf("trans(%f %f %f -> %f %f %f, %f %f %f -> %f %f %f)", start[0], start[1], start[2], starttransformed[0], starttransformed[1], starttransformed[2], end[0], end[1], end[2], endtransformed[0], endtransformed[1], endtransformed[2]);
+ Con_Printf("trans(%f %f %f -> %f %f %f, %f %f %f -> %f %f %f)", extendtraceinfo.extendstart[0], extendtraceinfo.extendstart[1], extendtraceinfo.extendstart[2], starttransformed[0], starttransformed[1], starttransformed[2], extendtraceinfo.extendend[0], extendtraceinfo.extendend[1], extendtraceinfo.extendend[2], endtransformed[0], endtransformed[1], endtransformed[2]);
#endif
- if (model && model->TraceLine)
- model->TraceLine(model, bound(0, frame, (model->numframes - 1)), trace, starttransformed, endtransformed, hitsupercontentsmask);
+ if (model && model->TraceLineAgainstSurfaces && hitsurfaces)
+ model->TraceLineAgainstSurfaces(model, frameblend, skeleton, trace, starttransformed, endtransformed, hitsupercontentsmask, skipsupercontentsmask);
+ else if (model && model->TraceLine)
+ model->TraceLine(model, frameblend, skeleton, trace, starttransformed, endtransformed, hitsupercontentsmask, skipsupercontentsmask);
else
- Collision_ClipTrace_Box(trace, bodymins, bodymaxs, starttransformed, vec3_origin, vec3_origin, endtransformed, hitsupercontentsmask, bodysupercontents, 0, NULL);
- trace->fraction = bound(0, trace->fraction, 1);
- trace->realfraction = bound(0, trace->realfraction, 1);
+ Collision_ClipTrace_Box(trace, bodymins, bodymaxs, starttransformed, vec3_origin, vec3_origin, endtransformed, hitsupercontentsmask, skipsupercontentsmask, bodysupercontents, 0, NULL);
+
+ Collision_ClipExtendFinish(&extendtraceinfo);
- VectorLerp(start, trace->fraction, end, trace->endpos);
// transform plane
// NOTE: this relies on plane.dist being directly after plane.normal
- Matrix4x4_TransformPositivePlane(matrix, trace->plane.normal[0], trace->plane.normal[1], trace->plane.normal[2], trace->plane.dist, trace->plane.normal);
+ Matrix4x4_TransformPositivePlane(matrix, trace->plane.normal[0], trace->plane.normal[1], trace->plane.normal[2], trace->plane.dist, trace->plane.normal_and_dist);
}
-void Collision_ClipLineToWorld(trace_t *trace, dp_model_t *model, const vec3_t start, const vec3_t end, int hitsupercontents)
+void Collision_ClipLineToWorld(trace_t *trace, dp_model_t *model, const vec3_t tstart, const vec3_t tend, int hitsupercontentsmask, int skipsupercontentsmask, float extend, qboolean hitsurfaces)
{
- memset(trace, 0, sizeof(*trace));
- trace->fraction = trace->realfraction = 1;
- if (model && model->TraceLine)
- model->TraceLine(model, 0, trace, start, end, hitsupercontents);
- trace->fraction = bound(0, trace->fraction, 1);
- trace->realfraction = bound(0, trace->realfraction, 1);
- VectorLerp(start, trace->fraction, end, trace->endpos);
+ extendtraceinfo_t extendtraceinfo;
+ Collision_ClipExtendPrepare(&extendtraceinfo, trace, tstart, tend, extend);
+
+ if (model && model->TraceLineAgainstSurfaces && hitsurfaces)
+ model->TraceLineAgainstSurfaces(model, NULL, NULL, trace, extendtraceinfo.extendstart, extendtraceinfo.extendend, hitsupercontentsmask, skipsupercontentsmask);
+ else if (model && model->TraceLine)
+ model->TraceLine(model, NULL, NULL, trace, extendtraceinfo.extendstart, extendtraceinfo.extendend, hitsupercontentsmask, skipsupercontentsmask);
+
+ Collision_ClipExtendFinish(&extendtraceinfo);
}
-void Collision_ClipPointToGenericEntity(trace_t *trace, dp_model_t *model, int frame, const vec3_t bodymins, const vec3_t bodymaxs, int bodysupercontents, matrix4x4_t *matrix, matrix4x4_t *inversematrix, const vec3_t start, int hitsupercontentsmask)
+void Collision_ClipPointToGenericEntity(trace_t *trace, dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, const vec3_t bodymins, const vec3_t bodymaxs, int bodysupercontents, matrix4x4_t *matrix, matrix4x4_t *inversematrix, const vec3_t start, int hitsupercontentsmask, int skipsupercontentsmask)
{
float starttransformed[3];
-
memset(trace, 0, sizeof(*trace));
- trace->fraction = trace->realfraction = 1;
+ trace->fraction = 1;
Matrix4x4_Transform(inversematrix, start, starttransformed);
#if COLLISIONPARANOID >= 3
#endif
if (model && model->TracePoint)
- model->TracePoint(model, bound(0, frame, (model->numframes - 1)), trace, starttransformed, hitsupercontentsmask);
+ model->TracePoint(model, NULL, NULL, trace, starttransformed, hitsupercontentsmask, skipsupercontentsmask);
else
- Collision_ClipTrace_Point(trace, bodymins, bodymaxs, starttransformed, hitsupercontentsmask, bodysupercontents, 0, NULL);
+ Collision_ClipTrace_Point(trace, bodymins, bodymaxs, starttransformed, hitsupercontentsmask, skipsupercontentsmask, bodysupercontents, 0, NULL);
VectorCopy(start, trace->endpos);
// transform plane
// NOTE: this relies on plane.dist being directly after plane.normal
- Matrix4x4_TransformPositivePlane(matrix, trace->plane.normal[0], trace->plane.normal[1], trace->plane.normal[2], trace->plane.dist, trace->plane.normal);
+ Matrix4x4_TransformPositivePlane(matrix, trace->plane.normal[0], trace->plane.normal[1], trace->plane.normal[2], trace->plane.dist, trace->plane.normal_and_dist);
}
-void Collision_ClipPointToWorld(trace_t *trace, dp_model_t *model, const vec3_t start, int hitsupercontents)
+void Collision_ClipPointToWorld(trace_t *trace, dp_model_t *model, const vec3_t start, int hitsupercontentsmask, int skipsupercontentsmask)
{
memset(trace, 0, sizeof(*trace));
- trace->fraction = trace->realfraction = 1;
+ trace->fraction = 1;
if (model && model->TracePoint)
- model->TracePoint(model, 0, trace, start, hitsupercontents);
+ model->TracePoint(model, NULL, NULL, trace, start, hitsupercontentsmask, skipsupercontentsmask);
VectorCopy(start, trace->endpos);
}
if (isbmodel)
cliptrace->bmodelstartsolid = true;
cliptrace->startsolid = true;
- if (cliptrace->realfraction == 1)
+ if (cliptrace->fraction == 1)
cliptrace->ent = touch;
if (cliptrace->startdepth > trace->startdepth)
{
// cliptrace->inopen = true;
if (trace->inwater)
cliptrace->inwater = true;
- if ((trace->realfraction <= cliptrace->realfraction) && (VectorLength2(trace->plane.normal) > 0))
+ if ((trace->fraction < cliptrace->fraction) && (VectorLength2(trace->plane.normal) > 0))
{
cliptrace->fraction = trace->fraction;
- cliptrace->realfraction = trace->realfraction;
VectorCopy(trace->endpos, cliptrace->endpos);
cliptrace->plane = trace->plane;
cliptrace->ent = touch;
}
cliptrace->startsupercontents |= trace->startsupercontents;
}
-
-void Collision_ShortenTrace(trace_t *trace, float shorten_factor, const vec3_t end)
-{
- // now undo our moving end 1 qu farther...
- trace->fraction = bound(trace->fraction, trace->fraction / shorten_factor - 1e-6, 1); // we subtract 1e-6 to guard for roundoff errors
- trace->realfraction = bound(trace->realfraction, trace->realfraction / shorten_factor - 1e-6, 1); // we subtract 1e-6 to guard for roundoff errors
- if(trace->fraction >= 1) // trace would NOT hit if not expanded!
- {
- trace->fraction = 1;
- trace->realfraction = 1;
- VectorCopy(end, trace->endpos);
- memset(&trace->plane, 0, sizeof(trace->plane));
- trace->ent = NULL;
- trace->hitsupercontentsmask = 0;
- trace->hitsupercontents = 0;
- trace->hitq3surfaceflags = 0;
- trace->hittexture = NULL;
- }
-}